Influence of EBR on the structural resistance of RC slabs under quasi-static and blast loading: Experimental testing and numerical analysis

Flexural strengthening of reinforced concrete (RC) structures with externally bonded reinforcement (EBR) using carbon fibre-reinforced polymers (CFRP) has in recent years received increased interest from specialists, particularly when dealing with protective structures against terrorist or accidental blast loading. Although a significant number of studies have been conducted on the failure modes of the bonded interface for quasi -static conditions, there is still limited published research on the effects of blast loading. In this paper, RC slabs externally strengthened with CFRP are tested in three-point bending as well as subjected to blast loading. The behaviour of the tested specimens under both loading regimes is evaluated with special focus on the mechanisms that lead to the disruption of the CFRP. It was found that the debonding of the CFRP was caused, in both cases, by the fracture and separation of a thin layer of concrete in the near vicinity of the bonded interface. However, the mechanisms that lead to this failure differ. A numerical model was developed and simulations performed using the finite element (FE) code LS-DYNA to investigate the validity of commonly used simplifications on the modelling of the interface in both cases. It was found that although the modelling technique used to represent the disruption of CFRP under quasi-static conditions provide accurate results, it does not return accurate predictions of the debonding of CFRP under blast loading.

Automated summary

This paper investigates the behavior of RC slabs externally strengthened with CFRP under three-point bending and blast loading. It is found that the mechanisms leading to the debonding of CFRP differ under these two loading conditions.