Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Insights into the micromechanical response of adhesive joint with stochastic surface micro-roughness
Authors
Keywords
-
Journal
ENGINEERING FRACTURE MECHANICS
Volume 277, Issue -, Pages 108954
Publisher
Elsevier BV
Online
2022-11-22
DOI
10.1016/j.engfracmech.2022.108954
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Cohesive zone model prediction of debonding failure in CFRP-to-steel bonded interface with a ductile adhesive
- (2022) Zhen Wang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A simple and effective resin pre-coating treatment on grinded, acid pickled and anodised substrates for stronger adhesive bonding between Ti-6Al-4V titanium alloy and CFRP
- (2022) Yunsen Hu et al. SURFACE & COATINGS TECHNOLOGY
- Fracture and dynamic mechanical analysis of seawater aged aluminum-BFRP hybrid adhesive joints
- (2022) Hasan Ulus et al. ENGINEERING FRACTURE MECHANICS
- Quasi-static and intermediate test speed validation of SHPB specimens for the determination of mode I, mode II fracture toughness of structural epoxy adhesives
- (2022) P.D.P. Nunes et al. ENGINEERING FRACTURE MECHANICS
- Effect of cyclic aging on mode I fracture energy of dissimilar metal/composite DCB adhesive joints
- (2022) M. Moazzami et al. ENGINEERING FRACTURE MECHANICS
- Evaluation of strength and performance for a single lap bonded joint by insertion of structural elements in adhesive
- (2022) VenkataRamanaiah Darla et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Estimating microscale DE parameters of brittle adhesive joints using genetic expression programming
- (2022) Xing-er Wang et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- A novel genetic expression programming assisted calibration strategy for discrete element models of composite joints with ductile adhesives
- (2022) Xing-er Wang et al. THIN-WALLED STRUCTURES
- Voronoi-FDEM concept for modelling post-fracture response of progressively damaged structural glass
- (2021) Xing-er Wang et al. ENGINEERING WITH COMPUTERS
- 2D and 3D in-situ mechanical testing of an interpenetrating metal ceramic composite consisting of a slurry-based ceramic foam and AlSi10Mg
- (2021) Joél Schukraft et al. COMPOSITE STRUCTURES
- Effect of grit-blasting on the fracture toughness of hybrid titanium-thermoplastic composite joints
- (2021) Vanessa M. Marinosci et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Adhesive bond strength enhancing between carbon fiber reinforced polymer and aluminum substrates with different surface morphologies created by three sulfuric acid solutions
- (2021) Fei Cheng et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Effects of anodizing surface treatment on the mechanical strength of aluminum alloy 5083 to fibre reinforced composites adhesive joints
- (2021) V. Fiore et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Structural integrity of adhesively bonded 3D-printed joints
- (2021) Mohammad Reza Khosravani et al. POLYMER TESTING
- Fracture mechanics approach to stress singularities in composite adhesive joints
- (2021) J.M.M. Dionísio et al. COMPOSITE STRUCTURES
- Adhesive bonding of 3D-printed short- and continuous-carbon-fiber composites: An experimental analysis of design methods to improve joint strength
- (2021) Marco Pizzorni et al. COMPOSITES PART B-ENGINEERING
- Modified cohesive zone model for soft adhesive layer considering rate dependence of intrinsic fracture energy
- (2021) Zhuoran Yang et al. ENGINEERING FRACTURE MECHANICS
- Optimizing adhesive bonding between CFRP and Al alloy substrate through resin pre-coating by filling micro-cavities from sandblasting
- (2021) Bo Tan et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Mode-II fracture behavior evaluation for adhesively bonded pultruded GFRP/steel joint using four-point bending test
- (2021) Zhengwen Jiang et al. THIN-WALLED STRUCTURES
- Shear strength model of joints based on Gaussian smoothing method and macro-micro roughness
- (2021) Shijie Xie et al. COMPUTERS AND GEOTECHNICS
- Influence of geometrical parameters on the strength of Hybrid CFRP-aluminium tubular adhesive joints
- (2020) Nicolas P. Lavalette et al. COMPOSITE STRUCTURES
- Mechanical performance of adhesive joints using high-performance nanocomposite adhesive material with carbon nanotube and triblock copolymer hybrids
- (2020) Panta Jojibabu et al. COMPOSITES PART B-ENGINEERING
- The influence of notching and mixed-adhesives at the bonding area on the strength and stress distribution of dissimilar single-lap joints
- (2020) Armin Yousefi Kanani et al. COMPOSITE STRUCTURES
- Microstructure informed micromechanical modelling of hydrated cement paste: Techniques and challenges
- (2020) Hongzhi Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- On the effect of interfacial patterns on energy dissipation in plastically deforming adhesive bonded ductile sheets
- (2020) Arturo Pascuzzo et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- How the spatial correlation in adhesion properties influences the performance of secondary bonding of laminated composites
- (2020) Xiaole Li et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Roughness characterization and formation mechanism of abrasive air jet micromachining surface studied by power spectral density
- (2020) Quanlai Li et al. Journal of Manufacturing Processes
- The effect of joint configuration on the strength and stress distributions of dissimilar adhesively bonded joints
- (2020) Armin Yousefi Kanani et al. ENGINEERING STRUCTURES
- Enhancing strength and toughness of adhesive joints via micro-structured mechanical interlocking
- (2020) Alex Hamilton et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Wave propagation analysis of one-dimensional CFRP lattice structure
- (2020) Yoshimasa Iwata et al. COMPOSITE STRUCTURES
- The effects of Al surface treatment, adhesive thickness and microcapsule inclusion on the shear strength of bonded joints
- (2019) Minoo D. Shokrian et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Experimental characterisation and numerical modelling of the influence of bondline thickness, loading rate, and deformation mode on the response of ductile adhesive interfaces
- (2019) M. Lißner et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Temperature-dependent peel performance of adhesively rebonded hybrid joints
- (2019) D.V. Srinivasan et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Effect of laser texturing on the surface characteristics and bonding property of 30CrMnSiA steel adhesive joints
- (2019) Ziwei Feng et al. Journal of Manufacturing Processes
- NaOH etching and resin pre-coating treatments for stronger adhesive bonding between CFRP and aluminium alloy
- (2019) Yunsen Hu et al. COMPOSITES PART B-ENGINEERING
- Failure prediction and optimal selection of adhesives for glass/steel adhesive joints
- (2019) Ioannis Katsivalis et al. ENGINEERING STRUCTURES
- Effect of surface roughness and chemistry on the adhesion and durability of a steel-epoxy adhesive interface
- (2019) J.P.B. van Dam et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- DEM simulation of mortar-bolt interface behaviour subjected to shearing
- (2018) J. Shang et al. CONSTRUCTION AND BUILDING MATERIALS
- Fatigue resistance of an aluminium one-component polyurethane adhesive joint for the automotive industry: Effect of surface roughness and adhesive thickness
- (2018) Y. Boutar et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Parametric study of adhesive joints with non-flat sinusoid interfaces
- (2018) S.M.J. Razavi et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Toughening strategies in adhesive joints
- (2018) Kevin Maloney et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- DEM model for simulation of crack propagation in plasma-sprayed alumina coatings
- (2018) N. Ferguen et al. SURFACE & COATINGS TECHNOLOGY
- In situ analysis of interfacial damage in adhesively bonded composite joints subjected to various surface pretreatments
- (2018) Ran Tao et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint
- (2018) Omid Sam-Daliri et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Analyzing effects of surface roughness, voids, and particle–matrix interfacial bonding on the failure response of a heterogeneous adhesive
- (2018) Bowen Liang et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- Improvement of adhesive bonding of grit-blasted steel substrates by using diluted resin as a primer
- (2017) Binhua Wang et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Mechanical behavior of interlocking multi-stepped double scarf adhesive joints including void and disbond effects
- (2014) Erol Sancaktar et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now