Investigation the effect of freeze–thaw cycle on fracture mode classification in concrete based on acoustic emission parameter analysis
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Investigation the effect of freeze–thaw cycle on fracture mode classification in concrete based on acoustic emission parameter analysis
Authors
Keywords
-
Journal
CONSTRUCTION AND BUILDING MATERIALS
Volume 362, Issue -, Pages 129789
Publisher
Elsevier BV
Online
2022-11-24
DOI
10.1016/j.conbuildmat.2022.129789
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Developing a new acoustic emission source classification criterion for concrete structures based on signal parameters
- (2022) Fengqiao Zhang et al. CONSTRUCTION AND BUILDING MATERIALS
- Evaluation of fracture behavior of high-strength hydraulic concrete damaged by freeze-thaw cycle test
- (2022) Xiangyi Zhu et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental study on compressive strength and frost resistance of steam cured concrete with mineral admixtures
- (2022) Bo Chen et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation on model-I fracture toughness of sandstone with the structure of typical bedding inclination angles subjected to three-point bending
- (2022) Yu Zhao et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Elastoplastic Analytical Solution for the Stress and Deformation of the Surrounding Rock in Cold Region Tunnels Considering the Influence of the Temperature Field
- (2022) Zedong Yang et al. International Journal of Geomechanics
- Permeability evolution of coal subjected to triaxial compression based on in-situ nuclear magnetic resonance
- (2022) Chaolin Wang et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Study on Freezing-Thawing damage mechanism and evolution model of concrete
- (2022) Yu Zhao et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- A Stratified NMR-Based Investigation of Spatial Evolution of Pore Structure in Sandstone After Cyclic Heating and Local Water Cooling
- (2022) Can Du et al. Natural Resources Research
- Crack Coalescence Behavior of Rock-Like Specimens Containing Two Circular Embedded Flaws
- (2022) Jing Bi et al. Lithosphere
- Experimental Characterization of the FRCM-Concrete Interface Bond Behavior Assisted by Digital Image Correlation
- (2021) Dario De Domenico et al. SENSORS
- Evolutions of the unfrozen water content of saturated sandstones during freezing process and the freeze-induced damage characteristics
- (2021) Lei Weng et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Implications for rock instability precursors and principal stress direction from rock acoustic experiments
- (2021) Longjun Dong et al. International Journal of Mining Science and Technology
- Pore and fracture development in coal under stress conditions based on nuclear magnetic resonance and fractal theory
- (2021) Yu Zhao et al. FUEL
- Study on a Damage Model and Uniaxial Compression Simulation Method of Frozen–Thawed Rock
- (2021) Qiang Feng et al. ROCK MECHANICS AND ROCK ENGINEERING
- Multi-technique damage monitoring of concrete beams: Acoustic Emission, Digital Image Correlation, Dynamic Identification
- (2020) Giuseppe Lacidogna et al. CONSTRUCTION AND BUILDING MATERIALS
- Fracture behaviour analysis of the full‐graded concrete based on digital image correlation and acoustic emission technique
- (2020) Fan Xiangqian et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Evaluation of fracture mode classification in flawed red sandstone under uniaxial compression
- (2020) Yong Niu et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- A new test method for the complete load-displacement curve of concrete under mixed mode I-II fracture
- (2020) Zhi-Min Wu et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Physico-mechanical properties of granite after cyclic thermal shock
- (2020) Peiyang Yu et al. Journal of Rock Mechanics and Geotechnical Engineering
- Fracture behavior and acoustic emission characteristics of reinforced concrete under mixed mode I-II load conditions
- (2020) Nina Gong et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Evolution in sandstone pore structures with freeze-thaw cycling and interpretation of damage mechanisms in saturated porous rocks
- (2020) Hailiang Jia et al. CATENA
- Damage constitutive model of coal gangue concrete under freeze-thaw cycles
- (2020) Jisheng Qiu et al. CONSTRUCTION AND BUILDING MATERIALS
- Experimental investigation of fatigue crack propagation in interbedded marble under multilevel cyclic uniaxial compressive loads
- (2020) Yu Wang et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Thermal and mechanical properties of concrete and its constituents at elevated temperatures: A review
- (2020) Manisha Malik et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation on the effect of freeze-thaw on fracture mode classification in marble subjected to multi-level cyclic loads
- (2020) Y. Wang et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Machine learning based crack mode classification from unlabeled acoustic emission waveform features
- (2019) Avik Kumar Das et al. CEMENT AND CONCRETE RESEARCH
- Stress–strain behaviour and acoustic emission characteristic of gangue concrete under axial compression in frost environment
- (2019) Xiao Guan et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of moisture on crack propagation in coal and its failure modes
- (2019) Qiangling Yao et al. ENGINEERING GEOLOGY
- Experimental Study on the Shear Behavior of the Bonding Interface Between Sandstone and Cement Mortar Under Freeze–Thaw
- (2019) Wenjie Wang et al. ROCK MECHANICS AND ROCK ENGINEERING
- A novel shearing fracture morphology method to assess the influence of freeze–thaw actions on concrete–granite interface
- (2019) Yanjun Shen et al. COLD REGIONS SCIENCE AND TECHNOLOGY
- Experimental investigations on the effects of ambient freeze-thaw cycling on dynamic properties and rock pore structure deterioration of sandstone
- (2018) Jielin Li et al. COLD REGIONS SCIENCE AND TECHNOLOGY
- Measurement of strain on concrete using an ordinary digital camera
- (2018) Reza Aghlara et al. MEASUREMENT
- Computationally Enabled 4D Visualizations Facilitate the Detection of Rock Fracture Patterns from Acoustic Emissions
- (2018) Alexander Hohl et al. ROCK MECHANICS AND ROCK ENGINEERING
- An experimental study of a freeze-thaw damage model of natural pumice concrete
- (2018) Xiaoxiao Wang et al. POWDER TECHNOLOGY
- Fracture analysis of sandstone with a single filled flaw under uniaxial compression
- (2018) Shuting Miao et al. ENGINEERING FRACTURE MECHANICS
- An experimental study on crack propagation at rock-concrete interface using digital image correlation technique
- (2017) Wei Dong et al. ENGINEERING FRACTURE MECHANICS
- Experimental Study of the Shear Strength of Bonded Concrete–Rock Interfaces: Surface Morphology and Scale Effect
- (2017) Hussein Mouzannar et al. ROCK MECHANICS AND ROCK ENGINEERING
- Rock slope failure in a recently deglaciated permafrost rock wall at Piz Kesch (Eastern Swiss Alps), February 2014
- (2016) Marcia Phillips et al. EARTH SURFACE PROCESSES AND LANDFORMS
- Do disk-type specimens generate a mode II fracture without confinement?
- (2016) Wei-Wei Ji et al. INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES
- Shear Strength of Partially Bonded Concrete–Rock Interfaces for Application in Dam Stability Analyses
- (2016) Alexandra Krounis et al. ROCK MECHANICS AND ROCK ENGINEERING
- Experimental study on debonding of shotcrete with acoustic emission during freezing and thawing cycle
- (2015) Ganesh Mainali et al. COLD REGIONS SCIENCE AND TECHNOLOGY
- Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features
- (2014) Alireza Farhidzadeh et al. CONSTRUCTION AND BUILDING MATERIALS
- Investigation of different fracture modes in cement-based materials by acoustic emission
- (2013) D.G. Aggelis et al. CEMENT AND CONCRETE RESEARCH
- Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation
- (2013) D.G. Aggelis et al. CONSTRUCTION AND BUILDING MATERIALS
- Acoustic emission signal for fatigue crack classification on reinforced concrete beam
- (2013) Noorsuhada Md Nor et al. CONSTRUCTION AND BUILDING MATERIALS
- Heterogeneous materials in compression: Correlations between absorbed, released and acoustic emission energies
- (2013) A. Carpinteri et al. ENGINEERING FAILURE ANALYSIS
- Acoustic emission detection in concrete specimens: Experimental analysis and lattice model simulations
- (2013) I Iturrioz et al. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS
- A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures
- (2013) Alireza Farhidzadeh et al. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
- An experimental study on cracking evolution in concrete and cement mortar by the b-value analysis of acoustic emission technique
- (2012) R. Vidya Sagar et al. CEMENT AND CONCRETE RESEARCH
- Monitoring mechanical damage in structural materials using complimentary NDE techniques based on thermography and acoustic emission
- (2012) E.Z. Kordatos et al. COMPOSITES PART B-ENGINEERING
- Effect of wave distortion on acoustic emission characterization of cementitious materials
- (2012) D.G. Aggelis et al. CONSTRUCTION AND BUILDING MATERIALS
- Damage assessment of corrosion in prestressed concrete by acoustic emission
- (2012) Hisham A. Elfergani et al. CONSTRUCTION AND BUILDING MATERIALS
- Use of acoustic emissions in flexural fatigue crack growth studies on concrete
- (2012) Santosh G. Shah et al. ENGINEERING FRACTURE MECHANICS
- Identification of Cracking Mechanisms in Scaled FRP Reinforced Concrete Beams using Acoustic Emission
- (2012) M. K. ElBatanouny et al. EXPERIMENTAL MECHANICS
- Fracture process and reliability of concrete made from high grade recycled aggregate using acoustic emission technique under compression
- (2012) Ni Nyoman Kencanawati et al. MATERIALS AND STRUCTURES
- Acoustic emission for fatigue damage characterization in metal plates
- (2011) D.G. Aggelis et al. MECHANICS RESEARCH COMMUNICATIONS
- Classification of cracking mode in concrete by acoustic emission parameters
- (2011) Dimitrios G. Aggelis MECHANICS RESEARCH COMMUNICATIONS
- AE monitoring of corrosion process in cyclic wet–dry test
- (2010) Yuma Kawasaki et al. CONSTRUCTION AND BUILDING MATERIALS
- Use of acoustic emission and X-ray computed tomography for damage evaluation of freeze-thawed concrete
- (2010) Tetsuya Suzuki et al. CONSTRUCTION AND BUILDING MATERIALS
- Crack classification in concrete based on acoustic emission
- (2010) Kentaro Ohno et al. CONSTRUCTION AND BUILDING MATERIALS
- Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete*
- (2010) MATERIALS AND STRUCTURES
- Recommendation of RILEM TC 212-ACD: acoustic emission and related NDE techniques for crack detection and damage evaluation in concrete*
- (2010) MATERIALS AND STRUCTURES
- Acoustic emission behavior of steel fibre reinforced concrete under bending
- (2009) D. Soulioti et al. CONSTRUCTION AND BUILDING MATERIALS
- Fracture process zone size and true fracture energy of concrete using acoustic emission
- (2009) S. Muralidhara et al. CONSTRUCTION AND BUILDING MATERIALS
- A study of the effect of displacement rate and moisture content on the mechanical properties of concrete: Use of acoustic emission
- (2007) P.G. Ranjith et al. MECHANICS OF MATERIALS
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started