A review on prediction and control of curing process-induced deformation of continuous fiber-reinforced thermosetting composite structures

Facile synthesis of MnS nanoparticle embedded porous carbon nanocomposite fibers for broadband electromagnetic wave absorption

(2022) Jing Qiao et al.   CARBON

Cure process evaluation of CFRP composites via neural network: From cure kinetics to thermochemical coupling

(2022) Xinyu Hui et al.   COMPOSITE STRUCTURES

Optimisation of layup type and fibre orientation in continuous-fibre reinforced components via anisotropy analysis

(2022) Clemens Zimmerling et al.   COMPOSITE STRUCTURES

Evaluation of curing process-induced deformation in plain woven composite structures based on cure kinetics considering various fabric parameters

(2022) Dong-Hyeop Kim et al.   COMPOSITE STRUCTURES

Facile manufacturing of Ni/MnO nanoparticle embedded carbon nanocomposite fibers for electromagnetic wave absorption

(2022) Yue Liu et al.   COMPOSITES PART B-ENGINEERING

Understanding the curing behaviors and properties of phthalonitrile containing benzoxazine with a new type of aniline curing agent

(2022) Xiaoqian Xu et al.   POLYMER TESTING

On volume changes during homopolymerization of polymer networks accessed via “Temperature modulated optical refractometry”

(2022) A. Klingler et al.   THERMOCHIMICA ACTA

Multiscale modeling of process-induced residual deformation on carbon-fiber-reinforced plastic laminate from quantum calculation to laminate scale finite-element analysis

(2022) Yoshiaki Kawagoe et al.   MECHANICS OF MATERIALS

Effect of curing pressure on the curing behavior of an epoxy system: Curing kinetics and simulation verification

(2022) Qun Liang et al.   POLYMER

Numerical modeling for curing of unidirectional carbon fiber reinforced polymer based on micromechanics in Laplace domain

(2022) Yuncong Feng et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Process-Induced Deformation of L-Shaped Laminates: Analysis of Tool–Part Interaction

(2021) Z. Yuan et al.   MECHANICS OF COMPOSITE MATERIALS

Comparative study on the effect of cure parameters on residual deformation for thermoset composite laminates

(2021) Zhendong Liu et al.   JOURNAL OF COMPOSITE MATERIALS

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites

(2021) Dong Yang et al.   POLYMER TESTING

An integrated modeling of the curing process and transverse tensile damage of unidirectional CFRP composites

(2021) Xinyu Hui et al.   COMPOSITE STRUCTURES

An experimental study of defect evolution in corners by autoclave processing of prepreg material

(2021) C. Netzel et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A physics-informed machine learning approach for solving heat transfer equation in advanced manufacturing and engineering applications

(2021) Navid Zobeiry et al.   ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE

Multi-objective approach to optimize cure process for thick composite based on multi-field coupled model with RBF surrogate model

(2021) Zhenyi Yuan et al.   COMPOSITES COMMUNICATIONS

Study on cure-induced residual stresses and spring-in deformation of L-shaped composite laminates using a simplified constitutive model considering stress relaxation

(2021) Xiaodong Liu et al.   COMPOSITE STRUCTURES

Moisture effect on shape distortions of curved quasi-isotropic prepreg composite laminates

(2021) Erik Hörberg et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Influence of resin curing cycle on the deformation of filament wound composites by in situ strain monitoring

(2021) Xiaodong Chen et al.   HIGH PERFORMANCE POLYMERS

Uncertainty analysis of curing-induced dimensional variability of composite structures utilizing physics-guided Gaussian process meta-modeling

(2021) Kai Zhou et al.   COMPOSITE STRUCTURES

A simulation framework for predicting process-induced distortions for precise manufacturing of aerospace thermoset composites

(2021) Neoklis Traiforos et al.   COMPOSITE STRUCTURES

The effect of curing deformation on the vibration behavior of laminated composite beams

(2021) Xiaobo Peng et al.   COMPOSITE STRUCTURES

On the source of the thermoelastic response from orthotropic fibre reinforced composite laminates

(2021) Irene Jiménez-Fortunato et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Physics-informed neural network for modelling the thermochemical curing process of composite-tool systems during manufacture

(2021) Sina Amini Niaki et al.   COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING

Outstanding Strengthening and Toughening Behavior of 3D‐Printed Fiber‐Reinforced Composites Designed by Biomimetic Interfacial Heterogeneity

(2021) Siwon Yu et al.   Advanced Science

Understanding the Origin of the Low Cure Shrinkage of Polybenzoxazine Resin by Computational Simulation

(2021) Prashik S. Gaikwad et al.   ACS Applied Polymer Materials

Investigations on thermoforming of carbon fiber reinforced epoxy vitrimer composites

(2021) Stefan Weidmann et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of elastic and thermal mismatch on push-in mechanism and shear strength measurement of fiber/matrix interface

(2020) Jun Wang et al.   COMPOSITE INTERFACES

Investigating the effects of cooling rate on distortion of asymmetric composite laminates

(2020) Mohsen Mobarakian et al.   COMPOSITE STRUCTURES

Cure-induced residual stresses for warpage reduction in thermoset laminates

(2020) Giacomo Struzziero et al.   JOURNAL OF COMPOSITE MATERIALS

Rapid prediction of cured shape types of composite laminates using a FEM-ANN method

(2020) Ling Luo et al.   COMPOSITE STRUCTURES

Process-induced Deformation in U-shaped Honeycomb Aerospace Composite Structures

(2020) M. Al-Dhaheri et al.   COMPOSITE STRUCTURES

Ananalytical and Experimental Study of T - Shaped Composite Stiffened Panels: Effect of 90° Plies in Stringers on Curing and Buckling Performance

(2020) Whenchao Huang et al.   APPLIED COMPOSITE MATERIALS

Multi-instrumentation monitoring for the curing process of a composite structure

(2020) F. Collombet et al.   MEASUREMENT

Experimental and numerical investigation on the residual distortion and stress fields in un-symmetric hybrid composite laminates induced by the manufacturing process

(2020) Pezhman Khoshrooz et al.   MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES

Developing a thermomechanical and thermochemical model for investigating the cooling rate effects on the distortion of unsymmetrical viscoelastic polymeric composite laminates

(2020) Mohsen Mobarakian et al.   POLYMER TESTING

Model-free cure kinetics of additional liquid silicone rubber

(2020) Qining Ke et al.   THERMOCHIMICA ACTA

Understanding process-induced spring-in of L-shaped composite parts using analytical solution

(2020) Anxin Ding et al.   COMPOSITE STRUCTURES

Process induced deformations in composite sandwich panels using an in-homogeneous layup design

(2020) M. Al-Dhaheri et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Curing kinetics of acrylate-based and 3D printable IPNs

(2020) Osman Konuray et al.   THERMOCHIMICA ACTA

A fully coupled thermo-mechanical analysis for the minimisation of spring-in and process time in ultra-thick components for wind turbine blades

(2020) G. Struzziero et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Influence of manufacturing technique and autoclaving curing rate on the non-linear behaviour of thin-walled, GFRP channel columns – Experimental studies

(2020) Paweł Czapski et al.   THIN-WALLED STRUCTURES

In-plane compression response of woven CFRP composite after low-velocity impact: Modelling and experiment

(2020) Bin Yang et al.   THIN-WALLED STRUCTURES

Prediction and compensation of process-induced distortions for L-shaped 3D woven composites

(2020) Qi Wang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Constitutive relation, deformation, failure and strength of composites reinforced with continuous/short fibers or particles

(2020) Zheng-Ming Huang   COMPOSITE STRUCTURES

Process-Induced Stress and Deformation of Variable-Stiffness Composite Cylinders during Curing

(2019) Guiming Zhang et al.   Materials

Numerical Analysis of Curing Residual Stress and Deformation in Thermosetting Composite Laminates with Comparison between Different Constitutive Models

(2019) Jianfeng Dai et al.   Materials

Multipoint cure monitoring of temperature and strain of carbon fibre-reinforced plastic shafts using fibre Bragg grating sensors

(2019) Guoping Ding et al.   Nondestructive Testing and Evaluation

Effect of inter-laminar toughened layers on process-induced strain and deformation of L-shaped composites

(2019) Shu Minakuchi et al.   ADVANCED COMPOSITE MATERIALS

Formability, defects and strengthening effect of steel/CFRP structures fabricated by using the differential temperature forming process

(2019) Yuqin Guo et al.   COMPOSITE STRUCTURES

Multi-objective curing optimization of carbon fiber composite materials using data assimilation and localized heating

(2019) Ryosuke Matsuzaki et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Measuring yarn deformations induced by the manufacturing process of woven composites

(2019) Arturo Mendoza et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Distortions of composite aerospace frames due to processing, thermal loads and trimming operations and an assessment from an assembly perspective

(2019) Erik Kappel   COMPOSITE STRUCTURES

In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise

(2019) D. May et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Carbon nanomaterials enabled fiber sensors: A structure-oriented strategy for highly sensitive and versatile in situ monitoring of composite curing process

(2019) Sida Luo et al.   COMPOSITES PART B-ENGINEERING

Polymerization-induced shrinkage and dynamic thermal expansion behavior during network formation of polyurethanes

(2019) Martine Philipp et al.   THERMOCHIMICA ACTA

Process-induced deformation of L-shaped variable-stiffness composite structures during cure

(2019) Guiming Zhang et al.   COMPOSITE STRUCTURES

Spring-back behavior on L-shaped composite structures: A statistical analysis of angular recovery as a function of time and residual cure

(2019) Gláucio C. Pereira et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Cure strain monitoring in composite laminates with distributed optical sensor

(2019) Jung-Ting Tsai et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Investigation of curing deformation behavior of curved fiber metal laminates

(2019) Lu Che et al.   COMPOSITE STRUCTURES

Compensating process-induced distortions of composite structures: A short communication

(2018) Erik Kappel   COMPOSITE STRUCTURES

Cured shape prediction of fiber metal laminates considering interfacial interaction

(2018) Lu Che et al.   COMPOSITE STRUCTURES

Analysis of cure induced deformation of CFRP U-shaped laminates

(2018) Costanzo Bellini et al.   COMPOSITE STRUCTURES

A multi-hierarchical successive optimization method for reduction of spring-back in autoclave forming

(2018) Hu Wang et al.   COMPOSITE STRUCTURES

Investigation of non-uniform gelation effects on residual stresses of thick laminates based on tailed FBG sensor

(2018) Haixiao Hu et al.   COMPOSITE STRUCTURES

A Micromechanics-Based Processing Model for Predicting Residual Stress in Fiber-Reinforced Polymer Matrix Composites

(2018) Weijia Chen et al.   COMPOSITE STRUCTURES

Meshing recommendations for the P-approach application in ABAQUS – A tool for pheno-numerical spring-in prediction

(2018) Erik Kappel   COMPOSITE STRUCTURES

Process-induced residual stress of variable-stiffness composite laminates during cure

(2018) Guiming Zhang et al.   COMPOSITE STRUCTURES

A multi-pattern compensation method to ensure even temperature in composite materials during microwave curing process

(2018) Jing Zhou et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Numerical analysis of viscoelastic process-induced residual distortions during manufacturing and post-curing

(2018) Maria Benavente et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Development of kinetics sub-model of cyanate ester-based prepregs for autoclave molding process simulation

(2018) Prosenjit Maji et al.   HIGH TEMPERATURE MATERIALS AND PROCESSES

Curing multidirectional carbon fiber reinforced polymer composites with indirect microwave heating

(2018) Yingguang Li et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Integration of resin flow and stress development in process modelling of composites: Part II – Transversely isotropic formulation

(2018) S Mehdi Haghshenas et al.   JOURNAL OF COMPOSITE MATERIALS

Integration of resin flow and stress development in process modelling of composites: Part I – Isotropic formulation

(2018) S Mehdi Haghshenas et al.   JOURNAL OF COMPOSITE MATERIALS

Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling

(2018) Alice Courtois et al.   JOURNAL OF COMPOSITE MATERIALS

A three-phase integrated flow-stress model for processing of composites

(2018) Sina Amini Niaki et al.   MECHANICS OF MATERIALS

A Study on Curing Kinetics of Nano-Phase Modified Epoxy Resin

(2018) Hailing Ma et al.   Scientific Reports

Investigation of Fast Curing Epoxy Resins Regarding Process Induced Distortions of Fibre Reinforced Composites

(2018) Fabian Groh et al.   COMPOSITE STRUCTURES

Experimental investigation on spring-back deformation during autoclave curing of parabolic antenna reflectors

(2018) Dhaval B. Shah et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Geometric compensation of convex forming tools for successful final processing in concave cure tools – An experimental study

(2018) Tommy Grankäll et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

An Improved Analytical Solution for Process-Induced Residual Stresses and Deformations in Flat Composite Laminates Considering Thermo-Viscoelastic Effects

(2018) Chao Liu et al.   Materials

A new analytical solution for cure-induced spring-in of L-shaped composite parts

(2018) Anxin Ding et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Thickness effect on spring-in of prepreg composite L-profiles – An experimental study

(2018) Erik Hörberg et al.   COMPOSITE STRUCTURES

A zone-based approach to predict process-induced distortions of composite structures based on a ‘spring-in reference curve’

(2018) Erik Kappel   COMPOSITE STRUCTURES

UV-curing kinetics and performance development of in situ curable 3D printing materials

(2017) Ye Chan Kim et al.   EUROPEAN POLYMER JOURNAL

Fabrication induced spring-back in thermosetting woven composite parts with variable thickness

(2017) Mumtaz Ali et al.   Journal of Industrial Textiles

A two-phase integrated flow-stress process model for composites with application to highly compressible phases

(2017) Sina Amini Niaki et al.   MECHANICS OF MATERIALS

A Review on the Mechanical Modeling of Composite Manufacturing Processes

(2016) Ismet Baran et al.   ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING

Effects of gaps and overlaps on the buckling behavior of an optimally designed variable-stiffness composite laminates – A numerical and experimental study

(2016) A. Marouene et al.   COMPOSITE STRUCTURES

A thermo-viscoelastic model of process-induced residual stresses in composite structures with considering thermal dependence

(2016) Anxin Ding et al.   COMPOSITE STRUCTURES

Forced-interaction and spring-in – Relevant initiators of process-induced distortions in composite manufacturing

(2016) Erik Kappel   COMPOSITE STRUCTURES

Composite cure simulation scheme fully integrating internal strain measurement

(2016) Shu Minakuchi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Cure simulation with resistively in situ heated CFRP molds: Implementation and validation

(2016) J.S. Weiland et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Microwave–material interaction phenomena: Heating mechanisms, challenges and opportunities in material processing

(2016) Radha Raman Mishra et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

An analytical model on through-thickness stresses and warpage of composite laminates due to tool–part interaction

(2016) Zhenyi Yuan et al.   COMPOSITES PART B-ENGINEERING

Residual stresses created during curing of a polymer matrix composite using a viscoelastic model

(2016) J.T. Zhang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Reduction of composite deformation based on tool-part thermal expansion matching and stress-free temperature theory

(2016) Yong Lu et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

A differential approach to finite element modelling of isotropic and transversely isotropic viscoelastic materials

(2016) Nima Zobeiry et al.   MECHANICS OF MATERIALS

Characteristic shrinkage evaluation of photocurable materials

(2016) Ji-Won Park et al.   POLYMER TESTING

Closed form expression for residual stresses and warpage during cure of composite laminates

(2015) M. Abouhamzeh et al.   COMPOSITE STRUCTURES

Spring-in of curved CFRP/foam-core sandwich structures

(2015) Erik Kappel   COMPOSITE STRUCTURES

Investigation of curing effects on distortion of fibre metal laminates

(2015) M. Abouhamzeh et al.   COMPOSITE STRUCTURES

A three-dimensional thermo-viscoelastic analysis of process-induced residual stress in composite laminates

(2015) Anxin Ding et al.   COMPOSITE STRUCTURES

Predicting process-induced distortions in composite manufacturing – A pheno-numerical simulation strategy

(2015) Erik Kappel et al.   COMPOSITE STRUCTURES

Spring-back simulation of unidirectional carbon/epoxy flat laminate composite manufactured through autoclave process

(2015) L. Mezeix et al.   COMPOSITE STRUCTURES

Effect of fibre wrinkling to the spring-in behaviour of L-shaped composite materials

(2015) Kenan Çınar et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Investigation of process induced warpage for pultrusion of a rectangular hollow profile

(2015) Ismet Baran et al.   COMPOSITES PART B-ENGINEERING

Mechanical Modelling of Pultrusion Process: 2D and 3D Numerical Approaches

(2014) Ismet Baran et al.   APPLIED COMPOSITE MATERIALS

Modelling the pultrusion process of an industrial L-shaped composite profile

(2014) Ismet Baran et al.   COMPOSITE STRUCTURES

Meta-modeling of the curing process of thermoset matrix composites by means of a FEM–ANN approach

(2014) Pierpaolo Carlone et al.   COMPOSITES PART B-ENGINEERING

Cure-dependent thermo-chemical modelling and analysis of the manufacturing process of an aircraft composite frame

(2014) Christian Brauner et al.   JOURNAL OF COMPOSITE MATERIALS

Process distortions in prepreg manufacturing – An experimental study on CFRP L-profiles

(2013) E. Kappel et al.   COMPOSITE STRUCTURES

Manufacturing distortions of a CFRP box-structure – A semi-numerical prediction approach

(2013) E. Kappel et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Tooling geometry optimization for compensation of cure-induced distortions of a curved carbon/epoxy C-spar

(2013) B. Wucher et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

In-plane deformation of multi-layered unidirectional thermoset prepreg – Modelling and experimental verification

(2013) Ylva Larberg et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Formability analyses of uni-directional and textile reinforced thermoplastics

(2013) S.P. Haanappel et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Process induced residual stresses and distortions in pultrusion

(2013) Ismet Baran et al.   COMPOSITES PART B-ENGINEERING

Chemical shrinkage and thermomechanical characterization of an epoxy resin during cure by a novel in situ measurement method

(2013) C. Billotte et al.   EUROPEAN POLYMER JOURNAL

Modelling manufacturing deformations in corner sections made of composite materials

(2013) Kenan Çınar et al.   JOURNAL OF COMPOSITE MATERIALS

Chemical shrinkage characterization techniques for thermoset resins and associated composites

(2013) Yasir Nawab et al.   JOURNAL OF MATERIALS SCIENCE

Periodic Architecture for High Performance Shock Absorbing Composites

(2013) Abha Misra et al.   Scientific Reports

Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation

(2013) Vasileios M. Drakonakis et al.   Advances in Materials Science and Engineering

Study on the Effect of Cure Cycle on the Process Induced Deformation of Cap Shaped Stiffened Composite Panels

(2012) Yong Miao et al.   APPLIED COMPOSITE MATERIALS

Spring-in behavior of curved composites manufactured by Flexible Injection

(2012) Philippe Causse et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Experimental identification of process parameters inducing warpage of autoclave-processed CFRP parts

(2012) D. Stefaniak et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

In situ monitoring of the strain evolution and curing reaction of composite laminates to reduce the thermal residual stress using FBG sensor and dielectrometry

(2012) Hak-Sung Kim et al.   COMPOSITES PART B-ENGINEERING

Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients

(2012) Yasir Nawab et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Analytical estimate for curing-induced stress and warpage in coating layers

(2012) K. M. B. Jansen et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Evolution of chemical and thermal curvatures in thermoset-laminated composite plates during the fabrication process

(2012) Yasir Nawab et al.   JOURNAL OF COMPOSITE MATERIALS

Prediction and optimization of cure cycle of thick fiber-reinforced composite parts using dynamic artificial neural networks

(2012) Parisa Eghbal Jahromi et al.   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

A semi-analytical simulation strategy and its application to warpage of autoclave-processed CFRP parts

(2011) E. Kappel et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Role of tool-part interaction in process-induced warpage of autoclave-manufactured composite structures

(2010) X. Zeng et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of thermal residual stresses on matrix failure under transverse tension at micromechanical level: A numerical and experimental analysis

(2010) E. Correa et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Prediction of cure induced warpage of micro-electronic products

(2010) J. de Vreugd et al.   MICROELECTRONICS RELIABILITY

Designing curing conditions in order to analyse the influence of process-induced stresses upon some mechanical properties of carbon / epoxy laminates at constant Tg and degree of cure

(2010) Philippe A. Olivier et al.   International Journal of Material Forming

Consolidation and Warpage Deformation Finite Element Analysis of Filament Wound Tubes

(2009) Jun Li et al.   APPLIED COMPOSITE MATERIALS

Process-induced deformation of composite T-stiffener structures

(2009) Chensong Dong   COMPOSITE STRUCTURES

Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: Part II – Curved geometries

(2009) Abdul Rahim Ahamed Arafath et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A study of the integrated composite material structures under different fabrication processing

(2009) Jun Li et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Development of the properties of a carbon fibre reinforced thermosetting composite through cure

(2009) Nuri Ersoy et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Computationally efficient pseudo-viscoelastic models for evaluation of residual stresses in thermoset polymer composites during cure

(2009) Nima Zobeiry et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Modelling of the spring-in phenomenon in curved parts made of a thermosetting composite

(2009) Nuri Ersoy et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Modeling and simulation of photofabrication processes using unsaturated polyester resins

(2009) João Manuel Matias et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Cure shrinkage characterization of an epoxy resin system by two in situ measurement methods

(2009) Loleï Khoun et al.   POLYMER COMPOSITES

Curing Deformation Analysis for the Composite T-shaped Integrated Structures

(2008) Jun Li et al.   APPLIED COMPOSITE MATERIALS

Thermal residual stresses effects on fatigue crack growth of repaired panels bounded with various composite materials

(2008) Hossein Hosseini-Toudeshky et al.   COMPOSITE STRUCTURES

Closed-form solution for process-induced stresses and deformation of a composite part cured on a solid tool: Part I – Flat geometries

(2008) Abdul Rahim Ahamed Arafath et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Investigation on the spring-in phenomenon of carbon nanofiber-glass fiber/polyester composites manufactured with vacuum assisted resin transfer molding

(2008) Kuang-Ting Hsiao et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Experimental investigation of the effect of the mould thermal expansion on the development of internal stresses during carbon fibre composite processing

(2008) R. de Oliveira et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Spring-in angle as molding distortion for thermoplastic matrix composite

(2008) A SALOMI et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Artificial neural network (ANN) prediction of kinetic parameters of (CRFC) composites

(2008) E.M. Bezerra et al.   COMPUTATIONAL MATERIALS SCIENCE

Effect of mixing sequence on the curing of amine-hardened epoxy/ alumina nanocomposites as assessed by optical refractometry

(2008) M. Philipp et al.   Express Polymer Letters