A comprehensive review on fused deposition modelling of polylactic acid
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
A comprehensive review on fused deposition modelling of polylactic acid
Authors
Keywords
-
Journal
Progress in Additive Manufacturing
Volume -, Issue -, Pages -
Publisher
Springer Science and Business Media LLC
Online
2022-10-31
DOI
10.1007/s40964-022-00356-w
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- In vitro static and dynamic cell culture study of novel bone scaffolds based on 3D-printed PLA and cell-laden alginate hydrogel
- (2022) Reza Noroozi et al. Biomedical Materials
- Failure analysis of 3D-printed PLA components: Impact of manufacturing defects and thermal ageing
- (2022) Mohammad Reza Khosravani et al. ENGINEERING FAILURE ANALYSIS
- 4D Printing: Technological and Manufacturing Renaissance
- (2022) Muhammad Yasir Khalid et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Laser-aided additive manufacturing of high entropy alloys: Processes, properties, and emerging applications
- (2022) Zia Ullah Arif et al. Journal of Manufacturing Processes
- Polymers Based on PLA from Synthesis Using D,L-Lactic Acid (or Racemic Lactide) and Some Biomedical Applications: A Short Review
- (2022) Juliene Oliveira Campos de França et al. Polymers
- A review on four-dimensional (4D) bioprinting in pursuit of advanced tissue engineering applications
- (2022) Zia Ullah Arif et al. Bioprinting
- 3D printed scaffolds for tissue engineering applications: Mechanical, morphological, thermal, in-vitro and in-vivo investigations
- (2021) Nishant Ranjan et al. CIRP Journal of Manufacturing Science and Technology
- Developments in Chemical Treatments, Manufacturing Techniques and Potential Applications of Natural-Fibers-Based Biodegradable Composites
- (2021) Muhammad Yasir Khalid et al. Coatings
- Predicting drug release from diazepam FDM printed tablets using deep learning approach: Influence of process parameters and tablet surface/volume ratio
- (2021) Samiha Obeid et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Environment friendly, renewable and sustainable poly lactic acid (PLA) based natural fiber reinforced composites – A comprehensive review
- (2021) G. Rajeshkumar et al. JOURNAL OF CLEANER PRODUCTION
- An overview of non-biodegradable bioplastics
- (2021) Md Hafizur Rahman et al. JOURNAL OF CLEANER PRODUCTION
- Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
- (2021) I. Tirado-Garcia et al. COMPOSITE STRUCTURES
- Preparation of different morphologies cellulose nanocrystals from waste cotton fibers and its effect on PLLA/PDLA composites films
- (2021) Xing Cao et al. COMPOSITES PART B-ENGINEERING
- 3D-printed hybrid-carbon-based electrodes for electroanalytical sensing applications
- (2021) Jesús E. Contreras-Naranjo et al. ELECTROCHEMISTRY COMMUNICATIONS
- Porous PLAs with Controllable Density by FDM 3D Printing and Chemical Foaming Agent
- (2021) A. R. Damanpack et al. Micromachines
- Investigation of Tensile and Flexural Behavior of Green Composites along with their Impact Response at Different Energies
- (2021) Muhammad Yasir Khalid et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Experimental investigation on tensile properties of the polymer and composite specimens printed in a Triangular pattern
- (2021) Sourabh Tandon et al. Journal of Manufacturing Processes
- Critical review of FDM 3D printing of PLA biocomposites filled with biomass resources, characterization, biodegradability, upcycling and opportunities for biorefineries
- (2021) Samarthya Bhagia et al. Applied Materials Today
- 3D printing of PLA/n-HA composite scaffolds with customized mechanical properties and biological functions for bone tissue engineering
- (2021) Wenzhao Wang et al. COMPOSITES PART B-ENGINEERING
- Laser deposition of high-entropy alloys: A comprehensive review
- (2021) Zia Ullah Arif et al. OPTICS AND LASER TECHNOLOGY
- Cellulose nanofibers reinforced biodegradable polyester blends: Ternary biocomposites with balanced mechanical properties
- (2020) Yuankun Wang et al. CARBOHYDRATE POLYMERS
- Material characterization and precise finite element analysis of fiber reinforced thermoplastic composites for 4D printing
- (2020) Yuxuan Yu et al. COMPUTER-AIDED DESIGN
- Investigation into hydroxypropyl-methylcellulose-reinforced polylactide composites for fused deposition modelling
- (2020) Guangpeng Jiang et al. INDUSTRIAL CROPS AND PRODUCTS
- Assessment of the morphology and dimensional accuracy of 3D printed PLA and PLA/HAp scaffolds
- (2020) Ieva Gendviliene et al. Journal of the Mechanical Behavior of Biomedical Materials
- FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
- (2020) Sachini Wickramasinghe et al. Polymers
- Prediction of in-plane stiffness of multi-material 3D printed laminate parts fabricated by FDM process using CLT and its mechanical behaviour under tensile load
- (2020) Pradeep Kumar Mishra et al. Materials Today Communications
- Current applications of poly(lactic acid) composites in tissue engineering and drug delivery
- (2020) Shan Liu et al. COMPOSITES PART B-ENGINEERING
- Review on 3D printing: Fight against COVID-19
- (2020) Bankole I. Oladapo et al. MATERIALS CHEMISTRY AND PHYSICS
- A review on degradation mechanisms of polylactic acid: Hydrolytic, photodegradative, microbial, and enzymatic degradation
- (2020) Nor Fasihah Zaaba et al. POLYMER ENGINEERING AND SCIENCE
- The mechanical testing and performance analysis of polymer-fibre composites prepared through the additive manufacturing
- (2020) Vigneshwaran Shanmugam et al. POLYMER TESTING
- Dynamic Mechanical Analysis Investigations of PLA-Based Renewable Materials: How Are They Useful?
- (2020) Mariana Cristea et al. Materials
- Fused Deposition Modeling (FDM), the new asset for the production of tailored medicines
- (2020) Sylvain Cailleaux et al. JOURNAL OF CONTROLLED RELEASE
- Hybrid core-shell scaffolds for bone tissue engineering
- (2019) Muna Mustafa Kareem et al. Biomedical Materials
- Effect of Filling Pattern on the Tensile and Flexural Mechanical Properties of FDM 3D Printed Products
- (2019) B. Akhoundi et al. EXPERIMENTAL MECHANICS
- A critical review of fused deposition modeling 3D printing technology in manufacturing polylactic acid parts
- (2019) Zengguang Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
- (2019) Anouar El Magri et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- 4D Printing Self-Morphing Structures
- (2019) Mahdi Bodaghi et al. Materials
- Fabrication of complex shaped ceramic articles from 3D printed polylactic acid templates by replication process
- (2019) Sirisala Mamatha et al. CERAMICS INTERNATIONAL
- Effect of infill pattern and infill density at varying part orientation on tensile properties of fused deposition modeling-printed poly-lactic acid part
- (2019) Harshit K Dave et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process
- (2019) Leipeng Yang et al. SYNTHETIC METALS
- A critical review on 3D printed continuous fiber-reinforced composites: history, mechanism, materials and properties
- (2019) S.M. Fijul Kabir et al. COMPOSITE STRUCTURES
- Poly(lactic acid)/cellulose nanocrystal composites via the Pickering emulsion approach: Rheological, thermal and mechanical properties
- (2019) Yunchong Zhang et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Understanding the microstructural role of bio-sourced 3D printed structures on the tensile performance
- (2019) Sofiane Guessasma et al. POLYMER TESTING
- Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites
- (2019) M. Heidari-Rarani et al. COMPOSITES PART B-ENGINEERING
- Polylactide/hemp hurd biocomposites as sustainable 3D printing feedstock
- (2019) Xianglian Xiao et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Improvement of Surface Roughness and Hydrophobicity in PETG Parts Manufactured via Fused Deposition Modeling (FDM): An Application in 3D Printed Self–Cleaning Parts
- (2019) Juan M. Barrios et al. Materials
- 3D printing of continuous flax fibre reinforced biocomposites for structural applications
- (2019) A. Le Duigou et al. MATERIALS & DESIGN
- Experimental methods in chemical engineering: Thermogravimetric analysis—TGA
- (2019) Nooshin Saadatkhah et al. CANADIAN JOURNAL OF CHEMICAL ENGINEERING
- Carbonized cellulose nanofibers as dielectric heat sources for microwave annealing 3D printed PLA composite
- (2019) Ju Dong et al. COMPOSITES PART B-ENGINEERING
- 3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling
- (2019) Dan Wu et al. Journal of the Mechanical Behavior of Biomedical Materials
- Improvement on the properties of microcrystalline cellulose/polylactic acid composites by using activated biochar
- (2019) Qingfa Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Degradation properties of chitosan microspheres/poly(L-lactic acid) composite in vitro and in vivo
- (2018) Zhenzhao Guo et al. CARBOHYDRATE POLYMERS
- Combined effect of cellulose nanocrystals and poly(butylene succinate) on poly(lactic acid) crystallization: The role of interfacial affinity
- (2018) Xiaocan Zhang et al. CARBOHYDRATE POLYMERS
- Rosin modified cellulose nanofiber as a reinforcing and co-antimicrobial agents in polylactic acid /chitosan composite film for food packaging
- (2018) Xun Niu et al. CARBOHYDRATE POLYMERS
- Lactic acid assisted fabrication of bioactive three-dimensional PLLA/β-TCP fibrous scaffold for biomedical application
- (2018) Sunny Lee et al. CHEMICAL ENGINEERING JOURNAL
- Novel 3D porous biocomposite scaffolds fabricated by fused deposition modeling and gas foaming combined technology
- (2018) Ping Song et al. COMPOSITES PART B-ENGINEERING
- Investigations for mechanical properties of Hap, PVC and PP based 3D porous structures obtained through biocompatible FDM filaments
- (2018) Ravinder Sharma et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- In vitro degradation of a biodegradable polylactic acid/magnesium composite as potential bone augmentation material in the presence of titanium and PEEK dental implants
- (2018) Tycho Zimmermann et al. DENTAL MATERIALS
- Preparation and characterization of biocomposite packaging film from poly(lactic acid) and acylated microcrystalline cellulose using rice bran oil
- (2018) Ravindra D. Kale et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Recent concepts in biodegradable polymers for tissue engineering paradigms: a critical review
- (2018) Naseer Iqbal et al. INTERNATIONAL MATERIALS REVIEWS
- Evaluation of bone marrow stem cell response to PLA scaffolds manufactured by 3D printing and coated with polydopamine and type I collagen
- (2018) Bruna Nunes Teixeira et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Additive Manufacturing of PLA and CF/PLA Binding Layer Specimens via Fused Deposition Modeling
- (2018) Yuhang Li et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- In vitro and in vivo investigation of PLA/PCL scaffold coated with metformin-loaded gelatin nanocarriers in regeneration of critical-sized bone defects
- (2018) Mostafa Shahrezaee et al. Nanomedicine-Nanotechnology Biology and Medicine
- A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications
- (2018) W.S.W. Harun et al. POWDER TECHNOLOGY
- Graphene-containing PCL- coated Porous 13-93B3 Bioactive Glass Scaffolds for Bone Regeneration
- (2018) Mert Türk et al. Materials Research Express
- Highly loaded hydroxyapatite microsphere/ PLA porous scaffolds obtained by fused deposition modelling
- (2018) Carola Esposito Corcione et al. CERAMICS INTERNATIONAL
- 3D printing of bone scaffolds with hybrid biomaterials
- (2018) BankoleI. Oladapo et al. COMPOSITES PART B-ENGINEERING
- Functionalization of poly(lactic acid) scaffold surface by aminolysis and hyaluronan immobilization: How it affects mesenchymal stem cell proliferation
- (2018) Alexandre Monnier et al. EUROPEAN POLYMER JOURNAL
- Cork–PLA composite filaments for fused deposition modelling
- (2018) Fugen Daver et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Surface functionalization of 3D printed polymer scaffolds to augment stem cell response
- (2018) L.R. Jaidev et al. MATERIALS & DESIGN
- Bionic design and 3D printing of porous titanium alloy scaffolds for bone tissue repair
- (2018) Li Zhao et al. COMPOSITES PART B-ENGINEERING
- Controlling burst effect with PLA/PVA coaxial electrospun scaffolds loaded with BMP-2 for bone guided regeneration
- (2018) Talita Nascimento da Silva et al. Materials Science & Engineering C-Materials for Biological Applications
- Preparation of 3D printable micro/nanocellulose-polylactic acid (MNC/PLA) composite wire rods with high MNC constitution
- (2017) Zhiguo Wang et al. INDUSTRIAL CROPS AND PRODUCTS
- Development of a Flow Evolution Network Model for the Stress–Strain Behavior of Poly(L-lactide)
- (2017) Maureen L. Dreher et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Evaluating Mechanical Properties and Failure Mechanisms of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Parts
- (2017) M. S. Uddin et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Abiotic and biotic environmental degradation of the bioplastic polymer poly(lactic acid): A review
- (2017) Mehlika Karamanlioglu et al. POLYMER DEGRADATION AND STABILITY
- Lifetime prediction of biodegradable polymers
- (2017) Bronwyn Laycock et al. PROGRESS IN POLYMER SCIENCE
- PLA composites: From production to properties
- (2016) Marius Murariu et al. ADVANCED DRUG DELIVERY REVIEWS
- Poly(lactic acid) blends in biomedical applications
- (2016) P. Saini et al. ADVANCED DRUG DELIVERY REVIEWS
- Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review
- (2016) Shady Farah et al. ADVANCED DRUG DELIVERY REVIEWS
- Procedural influences on compression and injection moulded cellulose fibre-reinforced polylactide (PLA) composites: Influence of fibre loading, fibre length, fibre orientation and voids
- (2016) Nina Graupner et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Review of the recent developments in cellulose nanocomposite processing
- (2016) Kristiina Oksman et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Newly Developed Techniques on Polycondensation, Ring-Opening Polymerization and Polymer Modification: Focus on Poly(Lactic Acid)
- (2016) Yunzi Hu et al. Materials
- Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance
- (2016) Vidhya Nagarajan et al. ACS Sustainable Chemistry & Engineering
- Biodegradable and biocompatible polymers for tissue engineering application: a review
- (2016) Fatemeh Asghari et al. Artificial Cells Nanomedicine and Biotechnology
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
- (2016) Ryosuke Matsuzaki et al. Scientific Reports
- Polylactide composite foams containing carbon nanotubes and carbon black: Synergistic effect of filler on electrical conductivity
- (2015) Defeng Wu et al. CARBON
- Melt polycondensation to improve the dispersion of bacterial cellulose into polylactide via melt compounding: enhanced barrier and mechanical properties
- (2015) J. Ambrosio-Martín et al. CELLULOSE
- Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
- (2015) Giovanni Postiglione et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Porous electrospun polycaprolactone (PCL) fibres by phase separation
- (2015) Konstantinos Alexandros G. Katsogiannis et al. EUROPEAN POLYMER JOURNAL
- A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites
- (2015) Garima Mittal et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers
- (2015) Furkan H. Isikgor et al. Polymer Chemistry
- Direct 3D printing of polymers onto textiles: experimental studies and applications
- (2015) Eujin Pei et al. RAPID PROTOTYPING JOURNAL
- Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS
- (2015) Wenzheng Wu et al. Materials
- Optimization of fused deposition modeling process parameters: a review of current research and future prospects
- (2015) Omar A. Mohamed et al. Advances in Manufacturing
- Effect of different types of carbon fillers on mechanical and rheological properties of cyclic olefin copolymer (COC) composites
- (2014) Alper Kasgoz et al. COMPOSITES PART B-ENGINEERING
- Fused deposition modelling (FDM) process parameter prediction and optimization using group method for data handling (GMDH) and differential evolution (DE)
- (2014) Farzad Rayegani et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
- (2014) Piergiorgio Gentile et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Polymers for medical and tissue engineering applications
- (2014) Deniz Ozdil et al. JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
- Flammability and tensile properties of polylactide nanocomposites with short carbon fibers
- (2014) Kuo-Chung Cheng et al. JOURNAL OF MATERIALS SCIENCE
- Polylactide nanocomposites with functionalized carbon nanotubes and their stereocomplexes: A focused review
- (2014) Marek Brzeziński et al. MATERIALS LETTERS
- Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers
- (2013) Mahendra Thunga et al. CARBON
- Improving the mechanical performance of PLA composites with natural, man-made cellulose and glass fibers — a comparison to PP counterparts
- (2013) ADAM JASZKIEWICZ et al. POLIMERY
- In situ formed crosslinked polyurethane toughened polylactide
- (2013) Guang-Chen Liu et al. Polymer Chemistry
- Multifunctional nanostructured PLA materials for packaging and tissue engineering
- (2013) I. Armentano et al. PROGRESS IN POLYMER SCIENCE
- Char-forming behavior of nanofibrillated cellulose treated with glycidyl phenyl POSS
- (2012) Douglas M. Fox et al. CARBOHYDRATE POLYMERS
- Cellular biocomposites from polylactide and microfibrillated cellulose
- (2012) Carole IR Boissard et al. JOURNAL OF CELLULAR PLASTICS
- Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality
- (2012) Rolf Mülhaupt MACROMOLECULAR CHEMISTRY AND PHYSICS
- Natural weathering properties of acetylated bamboo plastic composites
- (2012) Ke-Chang Hung et al. POLYMER DEGRADATION AND STABILITY
- Poly-lactic acid synthesis for application in biomedical devices — A review
- (2011) Astrid J.R. Lasprilla et al. BIOTECHNOLOGY ADVANCES
- Mechanical and thermal properties of PLA composites with cellulose nanofibers and standard size fibers
- (2011) M. Kowalczyk et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Woven hybrid biocomposites: Dynamic mechanical and thermal properties
- (2011) M. Jawaid et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Carbon nanotube–polymer interactions in nanocomposites: A review
- (2011) Meysam Rahmat et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Polylactide toughening with epoxy-functionalized grafted acrylonitrile-butadiene-styrene particles
- (2011) Shulin Sun et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Effect of the epoxycyclohexyl polyhedral oligomeric silsesquioxane content on the dynamic fragility of an epoxy resin
- (2011) Heitor Luiz Ornaghi et al. JOURNAL OF NON-CRYSTALLINE SOLIDS
- Research progress in toughening modification of poly(lactic acid)
- (2011) Hongzhi Liu et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Comparison of injection moulded, natural fibre-reinforced composites with PP and PLA as matrices
- (2011) J. P. Mofokeng et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Dynamic mechanical characterization of epoxy/epoxycyclohexyl–POSS nanocomposites
- (2011) Vinicios Pistor et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cellulose-Based Bio- and Nanocomposites: A Review
- (2011) Susheel Kalia et al. International Journal of Polymer Science
- Compostability and biodegradation study of PLA–wheat straw and PLA–soy straw based green composites in simulated composting bioreactor
- (2010) Ranjan Pradhan et al. BIORESOURCE TECHNOLOGY
- An overview of the recent developments in polylactide (PLA) research
- (2010) K. Madhavan Nampoothiri et al. BIORESOURCE TECHNOLOGY
- Multiwalled carbon nanotubes and sepiolite nanoclays as flame retardants for polylactide and its natural fibre reinforced composites
- (2010) T. Dhanushka Hapuarachchi et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Improvement of mechanical performance of industrial hemp fibre reinforced polylactide biocomposites
- (2010) Moyeenuddin A. Sawpan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Poly-Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
- (2010) Majid Jamshidian et al. COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY
- Mechanical study of PLA–PCL fibers during in vitro degradation
- (2010) A.C. Vieira et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biodegradable polymer matrix nanocomposites for tissue engineering: A review
- (2010) I. Armentano et al. POLYMER DEGRADATION AND STABILITY
- Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
- (2010) Zhidong Han et al. PROGRESS IN POLYMER SCIENCE
- Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
- (2010) Gilberto Siqueira et al. Polymers
- Development and analysis of multi-layer scaffolds for tissue engineering
- (2009) Bernke J. Papenburg et al. BIOMATERIALS
- Probing cellulose/polylactic acid interactions in model biocomposite by colloidal force microscopy
- (2009) Gijo Raj et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- Mechanical properties of PLA composites with man-made cellulose and abaca fibres
- (2009) Andrzej K. Bledzki et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas
- (2009) Nina Graupner et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Surface functionalisation of bacterial cellulose as the route to produce green polylactide nanocomposites with improved properties
- (2009) Koon-Yang Lee et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Three-dimensional porous scaffolds at the crossroads of tissue engineering and cell-based gene therapy
- (2009) Daniel L. Coutu et al. JOURNAL OF CELLULAR BIOCHEMISTRY
- Characteristic studies of collapsibility of ABS patterns produced from FDM for investment casting
- (2009) W. S. W. Harun et al. MATERIALS RESEARCH INNOVATIONS
- Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites
- (2009) M.S. Islam et al. POLYMER DEGRADATION AND STABILITY
- Poly(lactic acid) modifications
- (2009) Rahul M. Rasal et al. PROGRESS IN POLYMER SCIENCE
- New Era of Cell-Based Orthopedic Therapies
- (2009) Arnold I. Caplan TISSUE ENGINEERING PART B-REVIEWS
- Fabrication and Properties of Carbon Fibers
- (2009) Xiaosong Huang Materials
- Effect of surface modified hydroxyapatite on the tensile property improvement of HA/PLA composite
- (2008) J. Li et al. APPLIED SURFACE SCIENCE
- Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
- (2008) Hideko T. Oyama POLYMER
- Nano-biocomposites: Biodegradable polyester/nanoclay systems
- (2008) P BORDES et al. PROGRESS IN POLYMER SCIENCE
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now