An investigation into the dynamic indentation response of metallic materials

Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr

(2015) Marko Knezevic et al.   ACTA MATERIALIA

Microstructure, mechanical and damping properties of Mg–Er–Gd–Zn alloy reinforced with stacking faults

(2015) Chi Xu et al.   MATERIALS & DESIGN

Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation

(2014) Benoit Merle et al.   SCANNING

Influence of test methodology and probe geometry on nanoscale fatigue failure of diamond-like carbon film

(2014) N.H. Faisal et al.   SURFACE & COATINGS TECHNOLOGY

Nanoindentation experiments with different loading rate distinguish the mechanism of incipient plasticity

(2013) D. Chrobak et al.   APPLIED PHYSICS LETTERS

Analysis of failure modes under nano-impact fatigue of coatings via high-speed sampling

(2013) J.M. Wheeler et al.   SURFACE & COATINGS TECHNOLOGY

Nanomechanical properties of duplex treated 42CrMo4 steel

(2013) J. Chen et al.   SURFACE ENGINEERING

Evaluation of strain rate sensitivity by constant load nanoindentation

(2012) Daniel Peykov et al.   JOURNAL OF MATERIALS SCIENCE

An investigation into the correlation between nano-impact resistance and erosion performance of EB-PVD thermal barrier coatings on thermal ageing

(2012) Jian Chen et al.   SURFACE & COATINGS TECHNOLOGY

Cutting performance of coated tools with various adhesion strength quantified by inclined impact tests

(2011) K.-D. Bouzakis et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Effects of mechanical properties and layer structure on the cyclic dynamic loading of TiN-based coatings

(2011) Jian Chen et al.   SURFACE & COATINGS TECHNOLOGY

Nano-impact test on a TiAlN PVD coating and correlation between experimental and FEM results

(2011) K.-D. Bouzakis et al.   SURFACE & COATINGS TECHNOLOGY

Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates

(2010) I. Ulacia et al.   ACTA MATERIALIA

Analytical relationship among nominal hardness, reduced Young’s modulus, the work of indentation, and strain hardening exponent

(2010) Dejun Ma et al.   JOURNAL OF MATERIALS SCIENCE

High resolution measurement of dynamic (nano) indentation impact energy: a step towards the determination of indentation fracture resistance

(2010) Nigel M. Jennett et al.   PHILOSOPHICAL MAGAZINE

Coating optimisation for high speed machining with advanced nanomechanical test methods

(2009) B.D. Beake et al.   SURFACE & COATINGS TECHNOLOGY

High-strain-rate response of ultra-fine-grained copper

(2008) A. Mishra et al.   ACTA MATERIALIA

The Hall–Petch breakdown at high strain rates: Optimizing nanocrystalline grain size for impact applications

(2008) Jason R. Trelewicz et al.   APPLIED PHYSICS LETTERS

Quantitative Impact Testing of Energy Dissipation at Surfaces

(2008) G. Constantinides et al.   EXPERIMENTAL MECHANICS

Physically Based Constitutive Model for Body Centered Cubic Metals with Applications to Iron

(2008) Amin Almasri et al.   JOURNAL OF ENGINEERING MECHANICS

A physically based constitutive model for fcc metals with applications to dynamic hardness

(2008) George Z. Voyiadjis et al.   MECHANICS OF MATERIALS

Analysis of ISE in dynamic hardness measurements of β-Sn single crystals using a depth-sensing indentation technique

(2007) O. Şahin et al.   MATERIALS CHARACTERIZATION