Effects of carbide precipitation on the microstructural and tribological properties of Co–Cr–Mo–C medical implants after thermal treatment

Composition, characteristics and tribological behavior of Cr, Co–Cr and Co–Cr/TiO 2 nano-composite coatings electrodeposited from trivalent chromium based baths

(2015) S. Mahdavi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Tribological behavior of Al2O3/Al composite coating on γ-TiAl at elevated temperature

(2015) Yi Xu et al.   MATERIALS CHARACTERIZATION

Mechanical properties of hot pressed CoCrMo alloy compacts for biomedical applications

(2015) B. Henriques et al.   MATERIALS & DESIGN

Effect of cold rolling on phase decomposition in biomedical Co–29Cr–6Mo–0.2N alloy during isothermal heat treatment at 1073K

(2014) Manami Mori et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of high temperature treatment on microstructure and mechanical properties of laser-clad NiCrBSi/WC coatings on titanium alloy substrate

(2014) Guang Jie Li et al.   MATERIALS CHARACTERIZATION

Effects of carbon concentration on microstructure and mechanical properties of as-cast nickel-free Co–28Cr–9W-based dental alloys

(2014) Kenta Yamanaka et al.   Materials Science & Engineering C-Materials for Biological Applications

Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy

(2013) Yuichiro Koizumi et al.   ACTA MATERIALIA

Dry sliding and tribocorrosion behaviour of hot pressed CoCrMo biomedical alloy as compared with the cast CoCrMo and Ti6Al4V alloys

(2013) Z. Doni et al.   MATERIALS & DESIGN

Development of new Co–Cr–W-based biomedical alloys: Effects of microalloying and thermomechanical processing on microstructures and mechanical properties

(2013) Kenta Yamanaka et al.   MATERIALS & DESIGN

Effects of sigma phase and carbide on the wear behavior of CoCrMo alloys in Hanks' solution

(2013) Yan Chen et al.   WEAR

Microstructure and tribological characteristics of aged Co–28Cr–5Mo–0.3C alloy

(2012) Sh. Zangeneh et al.   MATERIALS & DESIGN

Influence of carbon and nitrogen addition on microstructure and hot deformation behavior of biomedical Co–Cr–Mo alloy

(2012) Yunping Li et al.   MATERIALS CHEMISTRY AND PHYSICS

Grain refinement by pearlitic-type constituents in Co–28Cr–5Mo–0.3C alloy

(2012) Sh. Zangeneh et al.   MATERIALS LETTERS

Characterization of Co–Cr–Mo alloys after a thermal treatment for high wear resistance

(2012) C. Balagna et al.   Materials Science & Engineering C-Materials for Biological Applications

Enhanced Mechanical Properties of As-Forged Co-Cr-Mo-N Alloys with Ultrafine-Grained Structures

(2012) Kenta Yamanaka et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Origin of Significant Grain Refinement in Co-Cr-Mo Alloys Without Severe Plastic Deformation

(2012) Kenta Yamanaka et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Isothermal aging effect on the microstructure and dry sliding wear behavior of Co–28Cr–5Mo–0.3C alloy

(2011) H. R. Lashgari et al.   JOURNAL OF MATERIALS SCIENCE

Precipitates in As-Cast and Heat-Treated ASTM F75 Co-Cr-Mo-C Alloys Containing Si and/or Mn

(2011) Alfirano et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Characterization of wear particles generated from CoCrMo alloy under sliding wear conditions

(2011) R. Pourzal et al.   WEAR

Phase characterization in as-cast F-75 Co–Cr–Mo–C alloy

(2010) R. Rosenthal et al.   JOURNAL OF MATERIALS SCIENCE

FCC to HCP transformation kinetics in a Co–27Cr–5Mo–0.23C alloy

(2010) R. Turrubiates-Estrada et al.   JOURNAL OF MATERIALS SCIENCE

Microstructural characterization of as-cast biocompatible Co–Cr–Mo alloys

(2010) J.V. Giacchi et al.   MATERIALS CHARACTERIZATION

Microstructural evolution during isothermal aging and strain-induced transformation followed by isothermal aging in Co-Cr-Mo-C alloy: A comparative study

(2010) H.R. Lashgari et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of cold-rolled microstructures of biomedical Co-Cr-Mo alloys with and without N doping

(2010) Manami Mori et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Deformation induced FCC to HCP transformation in a Co–27Cr–5Mo–0.05C alloy

(2010) A. Mani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Isothermal Phase Transformation in Biomedical Co-29Cr-6Mo Alloy without Addition of Carbon or Nitrogen

(2010) Shingo Kurosu et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Carbide Formation and Dissolution in Biomedical Co-Cr-Mo Alloys with Different Carbon Contents during Solution Treatment

(2010) Shingo Mineta et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructure and tensile properties of metal injection molding Co–29Cr–6Mo–0.23C alloy

(2009) P. V. Muterlle et al.   JOURNAL OF MATERIALS SCIENCE

Cooling rate and carbon content effect on the fraction of secondary phases precipitate in as-cast microstructure of ASTM F75 alloy

(2008) L.E. Ramírez-Vidaurri et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The wear of high-carbon metal-on-metal bearings after different heat treatments

(2008) A Kinbrum et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE