Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

The impact of cold-bonded artificial lightweight aggregates produced by municipal solid waste incineration bottom ash (MSWIBA) replace natural aggregates on the mechanical, microscopic and environmental properties, durability of sustainable concrete

(2022) Jun Liu et al.   Journal of Cleaner Production

Dynamic splitting tensile bond behavior of new-to-old concrete interfaces

(2021) Bo Hu et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation

(2021) Hesong Jin et al.   CONSTRUCTION AND BUILDING MATERIALS

Impact of the nature of fibers on the physicomechanical behavior and durability of cement matrices

(2021) Wafaa Aboutair et al.   Iranian Journal of Science and Technology-Transactions of Civil Engineering

Recycling of industrial and agricultural wastes as alternative coarse aggregates: A step towards cleaner production of concrete

(2021) S.N. Chinnu et al.   CONSTRUCTION AND BUILDING MATERIALS

Recycled use of municipal solid waste incinerator fly ash and ferronickel slag for eco-friendly mortar through geopolymer technology

(2021) Wu-Jian Long et al.   Journal of Cleaner Production

A comprehensive review on performance of cementitious and geopolymeric concretes with recycled waste glass as powder, sand or cullet

(2021) Wenkui Dong et al.   RESOURCES CONSERVATION AND RECYCLING

Can incineration completely eliminate plastic wastes? An investigation of microplastics and heavy metals in the bottom ash and fly ash from an incineration plant

(2021) Maocai Shen et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Mechanical Properties and Durability of Sustainable Concrete Containing Various Industrial Solid Wastes

(2021) Xuanrui Zhang et al.   TRANSPORTATION RESEARCH RECORD

Roles of biochar in cement-based stabilization/solidification of municipal solid waste incineration fly ash

(2021) Liang Chen et al.   CHEMICAL ENGINEERING JOURNAL

Investigation on mechanical and micro properties of concrete incorporating seawater and sea sand in carbonized environment

(2021) Jun Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Designing novel magnesium oxysulfate cement for stabilization/solidification of municipal solid waste incineration fly ash

(2021) Lei Wang et al.   JOURNAL OF HAZARDOUS MATERIALS

Biochar-augmented carbon-negative concrete

(2021) Liang Chen et al.   CHEMICAL ENGINEERING JOURNAL

Durability of engineered cementitious composite exposed to acid mine drainage

(2020) Hao-Liang Wu et al.   CEMENT & CONCRETE COMPOSITES

Use of nano-SiO2 to develop a high performance green lightweight engineered cementitious composites containing fly ash cenospheres

(2020) Bin Xi et al.   JOURNAL OF CLEANER PRODUCTION

Sustainable regenerated binding materials (RBM) utilizing industrial solid wastes for soil and aggregate stabilization

(2020) Xuanrui Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material

(2020) Jun Liu et al.   JOURNAL OF HAZARDOUS MATERIALS

High-efficiency and low-carbon remediation of zinc contaminated sludge by magnesium oxysulfate cement

(2020) Binglin Guo et al.   JOURNAL OF HAZARDOUS MATERIALS

Valorization of concrete slurry waste (CSW) and fine incineration bottom ash (IBA) into cold bonded lightweight aggregates (CBLAs): Feasibility and influence of binder types

(2019) Pei Tang et al.   JOURNAL OF HAZARDOUS MATERIALS

Sustainable stabilization/solidification of municipal solid waste incinerator fly ash by incorporation of green materials

(2019) Liang Chen et al.   JOURNAL OF CLEANER PRODUCTION

Review of leaching behavior of municipal solid waste incineration (MSWI) ash

(2019) Hongwei Luo et al.   SCIENCE OF THE TOTAL ENVIRONMENT

Experimental investigation of the interface bond properties between SHCC and concrete under sulfate attack

(2019) Shuling Gao et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of coral waste-based mortar incorporating metakaolin: Part II. Chloride migration and binding behaviors

(2018) Yunyao Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

The durability and environmental properties of self-compacting concrete incorporating cold bonded lightweight aggregates produced from combined industrial solid wastes

(2018) P. Tang et al.   CONSTRUCTION AND BUILDING MATERIALS

Limitations and quality upgrading techniques for utilization of MSW incineration bottom ash in engineering applications – A review

(2018) Dongxing Xuan et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete

(2018) Xiao Huang et al.   CONSTRUCTION AND BUILDING MATERIALS

Understanding the effect of curing age on the chloride resistance of fly ash blended concrete by rapid chloride migration test

(2017) Jun Liu et al.   MATERIALS CHEMISTRY AND PHYSICS

Recycling of MSWI Bottom Ash: A Review of Chemical Barriers, Engineering Applications and Treatment Technologies

(2016) Bram Verbinnen et al.   Waste and Biomass Valorization

Characteristics and application potential of municipal solid waste incineration (MSWI) bottom ashes from two waste-to-energy plants

(2015) P. Tang et al.   CONSTRUCTION AND BUILDING MATERIALS

Shear thickening intensity of self-compacting concretes containing rounded lightweight aggregates

(2015) Mehmet Gesoglu et al.   CONSTRUCTION AND BUILDING MATERIALS

Recycling of MSWI fly ash by means of cementitious double step cold bonding pelletization: Technological assessment for the production of lightweight artificial aggregates

(2015) Francesco Colangelo et al.   JOURNAL OF HAZARDOUS MATERIALS

A study of multiple effects of nano-silica and hybrid fibres on the properties of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) incorporating waste bottom ash (WBA)

(2014) R. Yu et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of geopolymerised low-calcium bottom ash aggregate cured at ambient temperature

(2013) S. Geetha et al.   CEMENT & CONCRETE COMPOSITES

Strength and transport properties of steam cured and water cured lightweight aggregate concretes

(2013) Mehmet Gesoğlu et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterization of controlled low-strength material obtained from dewatered sludge and refuse incineration bottom ash: Mechanical and microstructural perspectives

(2013) Guangyin Zhen et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Coal Combustion Wastes Reuse in Low Energy Artificial Aggregates Manufacturing

(2013) Claudio Ferone et al.   Materials

Size and shape effects on compressive strength of lightweight concrete

(2012) Jae-Il Sim et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of carbonation on the leachability and compressive strength of cement-solidified and geopolymer-solidified synthetic metal wastes

(2012) Bhishan Pandey et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Recycling ground granulated blast furnace slag as cold bonded artificial aggregate partially used in self-compacting concrete

(2012) Mehmet Gesoğlu et al.   JOURNAL OF HAZARDOUS MATERIALS

Effect of internal curing on durability-related properties of high performance concrete

(2011) Semion Zhutovsky et al.   CEMENT AND CONCRETE RESEARCH

Effect of incinerator bottom ash properties on mechanical and pore size of blended cement mortars

(2011) An Cheng   MATERIALS & DESIGN

Chemical activation in view of MSWI bottom ash recycling in cement-based systems

(2008) A. Polettini et al.   JOURNAL OF HAZARDOUS MATERIALS