Journal
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Volume 853, Issue -, Pages -Publisher
ELSEVIER SCIENCE SA
DOI: 10.1016/j.msea.2022.143693
Keywords
Cu-4.5Al; Mechanical incompatibility; HDI stress; Strain delocalization
Categories
Funding
- National Natural Science Foundation of China (NSFC) [51664033, 51911540072, 51861015]
- Yunnan Science and Technology Program [2019IC004]
- JSPS/NSFC Bilateral Joint Research Project
- Basic Research Project of Yunnan Science and Technology Program [202001AU070081]
Ask authors/readers for more resources
This study systematically investigated the mechanical properties of Cu-4.5Al-SMAT specimens processed by surface mechanical attrition treatment (SMAT). The results showed that the hardness exhibited a gradient variation along the thickness after SMAT, which was related to the gradient defects. The mechanical incompatibility between gradient layers of the specimen was associated with the degree of hardness gradient, and the reduction of hardness gradient led to a decrease in strain hardening. The combination of gradient structure and coarse-grained matrix induced dispersed strain bands on the GS surface, resulting in high yield strength and considerable ductility.
Gradient-structured (GS) metals have been reported to possess superior mechanical properties. In this study, the mechanical incompatibility and strain delocalization of Cu-4.5Al-SMAT specimen processed by surface mechanical attrition treatment (SMAT) during tensile was systematically investigated. The results showed that the hardness of specimen exhibited a gradient variation along the thickness after SMAT, which was related to the gradient defects (deformation twins and dislocations). EBSD observation demonstrated that the magnitude of mechanical incompatibility between gradient layers of specimen was associated to the degree of hardness gradient, which was further measured by load-unload-reload (LUR) test. The hetero-deformation induced (HDI) stress of Cu-4.5Al-SMAT specimen was more obvious compared to annealed specimen without SMAT, and the rate of HDI stress strengthening decreased with increasing tensile strain due to the reduction of degree of hardness gradient. Additional strain hardening was found for the Cu-4.5Al-SMAT specimen, which was confirmed by hardness and TEM. Furthermore, the combination of the gradient structure and the coarse-grained matrix can induce dispersed strain bands on the GS surface, which led to strain delocalization and thus obtained high yield strength and considerable ductility in the Cu-4.5Al-SMAT specimen.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available