Upcycling of abandoned banner via thermocatalytic process over a MnFeCoNiCu high-entropy alloy catalyst

Constructing Structurally Ordered High‐entropy Alloy Nanoparticles on Nitrogen‐rich Mesoporous Carbon Nanosheets for High‐performance Oxygen Reduction

(2022) Guihua Zhu et al.   ADVANCED MATERIALS

Application of artificial neural network for prediction of high temperature oxidation behavior of AlCrFeMnNiWx (X = 0, 0.05, 0.1, 0.5) high entropy alloys

(2022) Sheetal Kumar Dewangan et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Effect of Additive Elements (x = Cr, Mn, Zn, Sn) on the Phase Evolution and Thermodynamic Complexity of AlCuSiFe-x High Entropy Alloys Fabricated via Powder Metallurgy

(2022) Ashutosh Sharma et al.   METALS AND MATERIALS INTERNATIONAL

Carbon dioxide-mediated thermochemical conversion of banner waste using cobalt oxide catalyst as a strategy for plastic waste treatment

(2022) Nahyeon Lee et al.   ENVIRONMENTAL RESEARCH

Noble-Metal High-Entropy-Alloy Nanoparticles: Atomic-Level Insight into the Electronic Structure

(2022) Dongshuang Wu et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Controlled Valence Electron Concentration Approach to Tailor the Microstructure and Phase Stability of an Entropy-Enhanced AlCoCrFeNi Alloy

(2022) Min Chul Oh et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Heat treatment and processing route consequences on the microstructure and hardness behavior of tungsten-containing high-entropy alloys

(2022) Sheetal Kumar Dewangan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Recovery of lactic acid from biodegradable straw waste through a CO2-assisted thermochemical process

(2022) Soosan Kim et al.   Journal of CO2 Utilization

Upcycling of Waste Teabags via Catalytic Pyrolysis in Carbon Dioxide over HZSM-11

(2021) Soosan Kim et al.   CHEMICAL ENGINEERING JOURNAL

Polymer Stabilized Droplet Templating towards Tunable Hierarchical Porosity in Single Crystalline Na 3 V 2 (PO 4 ) 3 for Enhanced Sodium‐Ion Storage

(2021) Hailong Xiong et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Co-pyrolysis for the valorization of food waste and oriental herbal medicine byproduct

(2021) Younghyun Lee et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Pyrolysis of polypropylene for production of fuel‐range products: Effect of molecular weight of polypropylene

(2021) Chanyeong Park et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Effect of light (X = Mg, Si) and heavy (X = Zn) metals on the microstructural evolution and densification of AlCuFeMnTi-X high-entropy alloy processed by advanced powder metallurgy

(2021) Myoung Jin Chae et al.   POWDER METALLURGY

A Solvent Polarity Induced Interface Self‐assembly Strategy towards Mesoporous Triazine‐based Carbon Materials

(2021) Rui Zhang et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Tailoring Compressive Strength and Absorption Energy of Lightweight Multi-Phase AlCuSiFeX (X = Cr, Mn, Zn, Sn) High-Entropy Alloys Processed via Powder Metallurgy

(2021) Ashutosh Sharma et al.   Materials

Phase separation and mechanical behavior of AlCoCrFeNi-X (X = Cu, Mn, Ti) high entropy alloys processed via powder metallurgy

(2021) Min Chul Oh et al.   INTERMETALLICS

Chemical recycling of plastic waste via thermocatalytic routes

(2021) Jechan Lee et al.   Journal of Cleaner Production

High-Entropy Alloys as Catalysts for the CO2 and CO Reduction Reactions: Experimental Realization

(2020) Subramanian Nellaiappan et al.   ACS Catalysis

Solvent‐Free Self‐Assembly for Scalable Preparation of Highly Crystalline Mesoporous Metal Oxides

(2020) Hailong Xiong et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Holey Lamellar High Entropy Oxide as Ultra‐Highly Active Heterogeneous Catalyst for Solvent‐free Aerobic Oxidation of Benzyl Alcohol

(2020) Danyang Feng et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Computationally aided, entropy-driven synthesis of highly efficient and durable multi-elemental alloy catalysts

(2020) Yonggang Yao et al.   Science Advances

The Use of Heterogeneous Catalysis in the Chemical Valorization of Plastic Waste

(2020) Lesli O. Mark et al.   ChemSusChem

Microstructural evolution and mechanical properties of non-Cantor AlCuSiZnFe lightweight high entropy alloy processed by advanced powder metallurgy

(2020) Ashutosh Sharma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Lightweight AlCuFeMnMgTi High Entropy Alloy with High Strength-to-Density Ratio Processed by Powder Metallurgy

(2020) Myoung Jin Chae et al.   METALS AND MATERIALS INTERNATIONAL

High-Entropy Alloys as a Platform for Catalysis: Progress, Challenges, and Opportunities

(2020) Yue Xin et al.   ACS Catalysis

A Resol‐Assisted Cationic Coordinative Co‐assembly Approach to Mesoporous ABO 3 Perovskite Oxides with Rich Oxygen Vacancy for Enhanced Hydrogenation of Furfural to Furfuryl Alcohol

(2020) Yuenan Zheng et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Pyrolysis of waste polypropylene plastics for energy recovery: Influence of heating rate and vacuum conditions on composition of fuel product

(2020) George Kofi Parku et al.   FUEL PROCESSING TECHNOLOGY

Co-pyrolysis of food waste and wood bark to produce hydrogen with minimizing pollutant emissions

(2020) Chanyeong Park et al.   ENVIRONMENTAL POLLUTION

Azo dye degradation behavior of AlFeMnTiM (M = Cr, Co, Ni) high-entropy alloys

(2019) Shi-kai Wu et al.   International Journal of Minerals Metallurgy and Materials

Production of Terephthalic Acid from Corn Stover Lignin

(2019) Song Song et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Fully Recrystallized Al0.5CoCrFeNi High-Entropy Alloy Strengthened by Nanoscale Precipitates

(2019) Haoxue Yang et al.   METALS AND MATERIALS INTERNATIONAL

Stable Multimetallic Nanoparticles for Oxygen Electrocatalysis

(2019) Steven D. Lacey et al.   NANO LETTERS

Structural Characterizations of Aluminosilicates in Two Types of Fly Ash Samples from Shanxi Province, North China

(2019) Yunxia Liu et al.   Minerals

High-entropy alloys

(2019) Easo P. George et al.   Nature Reviews Materials

Novel and promising electrocatalyst for oxygen evolution reaction based on MnFeCoNi high entropy alloy

(2019) Weiji Dai et al.   JOURNAL OF POWER SOURCES

Highly efficient decomposition of ammonia using high-entropy alloy catalysts

(2019) Pengfei Xie et al.   Nature Communications

Upcycling Single-Use Polyethylene into High-Quality Liquid Products

(2019) Gokhan Celik et al.   ACS Central Science

High entropy alloy as a highly active and stable electrocatalyst for hydrogen evolution reaction

(2018) Guoliang Zhang et al.   ELECTROCHIMICA ACTA

Nitrogen retention of biochar derived from different feedstocks at variable pyrolysis temperatures

(2018) Simeng Li et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Removal of Pb(II) from aqueous solutions using waste textiles/poly(acrylic acid) composite synthesized by radical polymerization technique

(2018) Tao Zhou et al.   JOURNAL OF ENVIRONMENTAL SCIENCES

Cost-effective and sustainable approach to transform end-of-life vinyl banner to value added product

(2018) Sagar T. Cholake et al.   RESOURCES CONSERVATION AND RECYCLING

Carbothermal shock synthesis of high-entropy-alloy nanoparticles

(2018) Yonggang Yao et al.   SCIENCE

Recently developed methods to enhance stability of heterogeneous catalysts for conversion of biomass-derived feedstocks

(2018) Soosan Kim et al.   KOREAN JOURNAL OF CHEMICAL ENGINEERING

Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics

(2017) Yuan Xue et al.   ENERGY CONVERSION AND MANAGEMENT

Employing CO 2 as reaction medium for in-situ suppression of the formation of benzene derivatives and polycyclic aromatic hydrocarbons during pyrolysis of simulated municipal solid waste

(2017) Jechan Lee et al.   ENVIRONMENTAL POLLUTION

First hexagonal close packed high-entropy alloy with outstanding stability under extreme conditions and electrocatalytic activity for methanol oxidation

(2017) Kirill V. Yusenko et al.   SCRIPTA MATERIALIA

Fabrication of reactive pigment composite particles for blue-light curable inkjet printing of textiles

(2017) Chenglong Wang et al.   RSC Advances

Tandem μ-reactor-GC/MS for online monitoring of aromatic hydrocarbon production via CaO-catalysed PET pyrolysis

(2017) S. Kumagai et al.   Reaction Chemistry & Engineering

Chemical recycling of waste plastics for new materials production

(2017) AliReza Rahimi et al.   Nature Reviews Chemistry

Microwave pyrolysis of oil palm fiber (OPF) for hydrogen production: Parametric investigation

(2016) Md Arafat Hossain et al.   ENERGY CONVERSION AND MANAGEMENT

Characterization of the Liquid Products from Hydrolyzed Epoxy and Polyester Resin Composites Using Solid-Phase Microextraction and Recovery of the Monomer Phthalic Acid

(2016) Hülya U. Sokoli et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Performance of a single chamber microbial fuel cell at different organic loads and pH values using purified terephthalic acid wastewater

(2015) Seyed Kamran Foad Marashi et al.   Journal of Environmental Health Science and Engineering

Alloy Design Strategies and Future Trends in High-Entropy Alloys

(2013) Jien-Wei Yeh   JOM

FTIR spectroscopic analysis of poly(ethylene terephthalate) on crystallization

(2012) Ziyu Chen et al.   EUROPEAN POLYMER JOURNAL

Comparative pyrolysis of polyolefins (PP and LDPE) and PET

(2009) İlkay Çit et al.   POLYMER BULLETIN