Thermochemical recycling of end-of-life and virgin HDPE: A pilot-scale study

Highly selective conversion of mixed polyolefins to valuable base chemicals using phosphorus-modified and steam-treated mesoporous HZSM-5 zeolite with minimal carbon footprint

(2022) Andreas Eschenbacher et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions

(2021) Onur Dogu et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

The challenges in recycling post-consumer polyolefins for food contact applications: A review

(2021) Victor S. Cecon et al.   RESOURCES CONSERVATION AND RECYCLING

Pyrolytic Conversion of Plastic Waste to Value-Added Products and Fuels: A Review

(2021) Sadegh Papari et al.   Materials

Different approaches to convert waste polyolefins into automotive fuels via hydrocracking with a NiW/HY catalyst

(2021) Francisco J. Vela et al.   FUEL PROCESSING TECHNOLOGY

Comparison of waste plastics pyrolysis under nitrogen and carbon dioxide atmospheres: A thermogravimetric and kinetic study

(2021) Juniza Md. Saad et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Synthesis of novel Ziegler Natta catalyst in the presence of internal promoter and electron donors for ethylene and ethylene/ 1-hexene polymerization

(2021) Hossein Bazgir et al.   JOURNAL OF POLYMER RESEARCH

Detailed Group-Type Characterization of Plastic-Waste Pyrolysis Oils: By Comprehensive Two-Dimensional Gas Chromatography Including Linear, Branched, and Di-Olefins

(2021) Hang Dao Thi et al.   Separations

Maximizing light olefins and aromatics as high value base chemicals via single step catalytic conversion of plastic waste

(2021) Andreas Eschenbacher et al.   CHEMICAL ENGINEERING JOURNAL

Thermal degradation of polyethylene in the presence of a non-acidic porous solid by a continuous flow reactor

(2021) Katsuhide Murata et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Opportunities and challenges for the application of post-consumer plastic waste pyrolysis oils as steam cracker feedstocks: To decontaminate or not to decontaminate?

(2021) Marvin Kusenberg et al.   WASTE MANAGEMENT

Pyrolysis of end-of-life polystyrene in a pilot-scale reactor: Maximizing styrene production

(2021) Azd Zayoud et al.   WASTE MANAGEMENT

Boron-Modified Mesoporous ZSM-5 for the Conversion of Pyrolysis Vapors from LDPE and Mixed Polyolefins: Maximizing the C2–C4 Olefin Yield with Minimal Carbon Footprint

(2021) Andreas Eschenbacher et al.   ACS Sustainable Chemistry & Engineering

A comprehensive experimental investigation of plastic waste pyrolysis oil quality and its dependence on the plastic waste composition

(2021) Marvin Kusenberg et al.   FUEL PROCESSING TECHNOLOGY

The effect of process and structural parameters on the stability, thermo-mechanical and thermal degradation of polymers with hydrocarbon skeleton containing PE, PP, PS, PVC, NR, PBR and SBR

(2020) Mehrdad Seifali Abbas-Abadi   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Beyond Mechanical Recycling: Giving New Life to Plastic Waste

(2020) Ina Vollmer et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Investigating Waste Plastic Pyrolysis Kinetic Parameters by Genetic Algorithm Coupled with Thermogravimetric Analysis

(2020) Ruming Pan et al.   Waste and Biomass Valorization

Detailed Analysis of the Composition of Selected Plastic Packaging Waste Products and Its Implications for Mechanical and Thermochemical Recycling

(2020) Martijn Roosen et al.   ENVIRONMENTAL SCIENCE & TECHNOLOGY

Development of HDPE composites with improved mechanical properties using calcium carbonate and NanoClay

(2020) M.Owais Awan et al.   PHYSICA B-CONDENSED MATTER

Pyrolysis of waste polypropylene plastics for energy recovery: Influence of heating rate and vacuum conditions on composition of fuel product

(2020) George Kofi Parku et al.   FUEL PROCESSING TECHNOLOGY

A recycler’s perspective on the implications of REACH and food contact material (FCM) regulations for the mechanical recycling of FCM plastics

(2020) Ellen De Tandt et al.   WASTE MANAGEMENT

Study of the degradation profile for virgin linear low-density polyethylene (LLDPE) and polyolefin (PO) plastic waste blends

(2019) S. M. Al-Salem et al.   Journal of Material Cycles and Waste Management

Thermal degradation of waste plastics under non-sweeping atmosphere: Part 1: Effect of temperature, product optimization, and degradation mechanism

(2019) R.K. Singh et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Plastic waste from recycling centres: Characterisation and evaluation of plastic recyclability

(2019) Giorgia Faraca et al.   WASTE MANAGEMENT

Coke deposition and product distribution in the co-cracking of waste polyolefin derived streams and vacuum gas oil under FCC unit conditions

(2019) Elena Rodríguez et al.   FUEL PROCESSING TECHNOLOGY

MOF-derived Ni-doped CoP@C grown on CNTs for high-performance supercapacitors

(2019) Jialin Gu et al.   CHEMICAL ENGINEERING JOURNAL

Waste tires pyrolysis kinetics and reaction mechanisms explained by TGA and Py-GC/MS under kinetically-controlled regime

(2019) Tamara Menares et al.   WASTE MANAGEMENT

Study of the thermal behavior, kinetics, and product characterization of biomass and low-density polyethylene co-pyrolysis by thermogravimetric analysis and pyrolysis-GC/MS

(2018) Yunwu Zheng et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Predictive model for the Dutch post-consumer plastic packaging recycling system and implications for the circular economy

(2018) Marieke T. Brouwer et al.   WASTE MANAGEMENT

Plastic flexible films waste management – A state of art review

(2018) O. Horodytska et al.   WASTE MANAGEMENT

Heat Transfer in Vacuum Pyrolysis of Decomposing Hazardous Plastic Wastes

(2018) Jujun Ruan et al.   ACS Sustainable Chemistry & Engineering

Current approaches to waste polymer utilization and minimization: a review

(2018) Meltem Okan et al.   JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY

Quantitative compositional analysis of Estonian shale oil using comprehensive two dimensional gas chromatography

(2017) Nenad D. Ristic et al.   FUEL PROCESSING TECHNOLOGY

Chemically recyclable polymers: a circular economy approach to sustainability

(2017) Miao Hong et al.   GREEN CHEMISTRY

Pyrolytic degradation of polyethylene in autoclave under high pressure to obtain fuel

(2017) Archana Kumari et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Mechanical and chemical recycling of solid plastic waste

(2017) Kim Ragaert et al.   WASTE MANAGEMENT

β-Alkyl Elimination: Fundamental Principles and Some Applications

(2016) Matthew E. O’Reilly et al.   CHEMICAL REVIEWS

The effect of different zeolite based catalysts on the pyrolysis of poly butadiene rubber

(2015) Sara Salam Zadeh Salmasi et al.   FUEL

Coke formation and deactivation pathways on H-ZSM-5 in the conversion of methanol to olefins

(2015) Sebastian Müller et al.   JOURNAL OF CATALYSIS

Processability and mechanical properties of extensively recycled high density polyethylene

(2015) Pavel Oblak et al.   POLYMER DEGRADATION AND STABILITY

Combined Comprehensive Two-Dimensional Gas Chromatography Analysis of Polyaromatic Hydrocarbons/Polyaromatic Sulfur-Containing Hydrocarbons (PAH/PASH) in Complex Matrices

(2014) Thomas Dijkmans et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Detailed compositional characterization of plastic waste pyrolysis oil by comprehensive two-dimensional gas-chromatography coupled to multiple detectors

(2014) Hilal E. Toraman et al.   JOURNAL OF CHROMATOGRAPHY A

Formation Mechanism of Polycyclic Aromatic Hydrocarbons beyond the Second Aromatic Ring

(2013) V. V. Kislov et al.   JOURNAL OF PHYSICAL CHEMISTRY A

The effect of melt flow index, melt flow rate, and particle size on the thermal degradation of commercial high density polyethylene powder

(2013) Mehrdad Seifali Abbas-Abadi et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Light olefins from HDPE cracking in a two-step thermal and catalytic process

(2012) M. Artetxe et al.   CHEMICAL ENGINEERING JOURNAL

Improved soil carbonate determination by FT-IR and X-ray analysis

(2012) Viktor J. Bruckman et al.   Environmental Chemistry Letters

Evaluation of pyrolysis product of virgin high density polyethylene degradation using different process parameters in a stirred reactor

(2012) Mehrdad Seifali Abbas-Abadi et al.   FUEL PROCESSING TECHNOLOGY

Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking

(2012) Maite Artetxe et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

The Influence of Chromium Oxide on the Sintering Behavior of Silicon Nitride

(2012) Ali Alem et al.   International Journal of Applied Ceramic Technology

The effect of temperature, catalyst, different carrier gases and stirrer on the produced transportation hydrocarbons of LLDPE degradation in a stirred reactor

(2012) Mehrdad Seifali Abbas-Abadi et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Effect of the melt flow index and melt flow rate on the thermal degradation kinetics of commercial polyolefins

(2012) Mehrdad Seifali Abbas-Abadi et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Study of the degradation mechanisms of polyethylene during reprocessing

(2011) A.A. Mendes et al.   POLYMER DEGRADATION AND STABILITY

A review on tertiary recycling of high-density polyethylene to fuel

(2011) Sachin Kumar et al.   RESOURCES CONSERVATION AND RECYCLING

Influence of copper chloride for the formation of aromatic compounds during polyethylene pyrolysis

(2010) Michel Sablier et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Comparative pyrolysis of polyolefins (PP and LDPE) and PET

(2009) İlkay Çit et al.   POLYMER BULLETIN

Influence of the repeated extrusion on the degradation of polyethylene. Structural changes in low density polyethylene

(2008) Jiří Dostál et al.   EUROPEAN POLYMER JOURNAL

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

(2007) S. Liang et al.   ACTA MATERIALIA