Properties of wood polymer composites based on polypropylene/olive wood flour: effects of fiber treatment and compatibilizer

Olive Cellulosic Fibre Based Epoxy Composites: Thermal and Dynamic Mechanical Properties

(2022) M. Jawaid et al.   Journal of Natural Fibers

Effects of Maleic Anhydride Grafted Polypropylene on the Physical, Mechanical and Flammability Properties of Wood-flour/Polypropylene/Ammonium Polyphosphate Composites

(2021) Wen Wang et al.   FIBERS AND POLYMERS

Wooden Polymer Composites of Poly(vinyl chloride), Olive Pits Flour, and Precipitated Bio-Calcium Carbonate

(2021) Salah F. Abdellah Ali et al.   ACS Omega

Olive fiber reinforced epoxy composites: Dimensional Stability, and mechanical properties

(2021) Siti Noorbaini Sarmin et al.   POLYMER COMPOSITES

Enzyme‐treated Tunisian Alfa fibers reinforced polylactic acid composites: An investigation in morphological, thermal, mechanical, and water resistance properties

(2020) Mouna Werchefani et al.   POLYMER COMPOSITES

Thermal stability of natural fibers and their polymer composites

(2020) Mohammad Asim et al.   IRANIAN POLYMER JOURNAL

Ultrasound evaluation of the mechanical properties as an investigation tool for the wood-polymer composites including olive wood flour

(2020) Nesrine Bouhamed et al.   MECHANICS OF MATERIALS

Fabrication of Aliphatic Water-Soluble Polyurethane Composites with Silane Treated CaCO3

(2020) Eyob Wondu et al.   Polymers

Properties and characteristics of nanocrystalline cellulose isolated from olive fiber

(2020) L.K. Kian et al.   CARBOHYDRATE POLYMERS

Biopolymers and Biocomposites: Chemistry and Technology

(2020) R.A. Ilyas et al.   Current Analytical Chemistry

Evaluation of interfacial compatibility in wood flour/polypropylene composites by using dynamic thermomechanical analysis

(2020) Feng Xiao et al.   POLYMER COMPOSITES

Observation of Potential Contaminants in Processed Biomass Using Fourier Transform Infrared Spectroscopy

(2020) Jingshun Zhuang et al.   Applied Sciences-Basel

Lignocellulosic waste fibers and their application as a component of urea-formaldehyde adhesive composition in the manufacture of plywood

(2019) Pavlo Bekhta et al.   European Journal of Wood and Wood Products

Mechanical, thermal and morphological properties of heat-treated wood-polypropylene composites and comparison of the composites with PROMETHEE method

(2019) Deniz Aydemir et al.   PLASTICS RUBBER AND COMPOSITES

Evaluation of Thermally Treated Calotropis Procera Fiber for the Removal of Crude Oil on the Water Surface

(2019) Sobral Hilário et al.   Materials

Synergetic effect of Posidonia oceanica fibres and deinking paper sludge on the thermo-mechanical properties of high density polyethylene composites

(2018) Manel Haddar et al.   INDUSTRIAL CROPS AND PRODUCTS

Improving the Performance of Bamboo and Eucalyptus Wood fiber/Polypropylene Composites Using Pectinase Pre-treatments

(2017) Xiaoping Li et al.   JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY

Surface chemical composition analysis of heat-treated bamboo

(2016) Fan-dan Meng et al.   APPLIED SURFACE SCIENCE

Sustainable biocomposites from biobased polyamide 6,10 and biocarbon from pyrolyzed miscanthus fibers

(2016) Emmanuel O. Ogunsona et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effects of wood fiber surface chemistry on strength of wood–plastic composites

(2015) Sébastien Migneault et al.   APPLIED SURFACE SCIENCE

Modification of xylan in alkaline treated bleached hardwood kraft pulps as classified by attenuated total-internal-reflection (ATR) FTIR spectroscopy

(2015) Zhiwen Chen et al.   CARBOHYDRATE POLYMERS

Effect of fiber loading on the properties of treated cellulose fiber-reinforced phenolic composites

(2015) Ester Rojo et al.   COMPOSITES PART B-ENGINEERING

Heat treated wood–nylon 6 composites

(2015) Deniz Aydemir et al.   COMPOSITES PART B-ENGINEERING

The effect of surface modifications on sisal fiber properties and sisal/poly (lactic acid) interface adhesion

(2015) A. Orue et al.   COMPOSITES PART B-ENGINEERING

Polypropylene biocomposites reinforced with softwood, abaca, jute, and kenaf fibers

(2015) A.K. Bledzki et al.   INDUSTRIAL CROPS AND PRODUCTS

Enzymatically treated natural fibres as reinforcing agents for biocomposite material: mechanical, thermal, and moisture absorption characterization

(2015) Michael George et al.   JOURNAL OF MATERIALS SCIENCE

Thermally Grafting Aminosilane onto Kenaf-Derived Cellulose and Its Influence on the Thermal Properties of Poly(Lactic Acid) Composites

(2014) Yee Bond Tee et al.   BioResources

Preparation and characterization of pre-silane modified ethyl cellulose-based microcapsules containing linseed oil

(2014) H. Es-haghi et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Helium plasma treatment voltage effect on adhesion of ramie fibers to polybutylene succinate

(2014) Ying Li et al.   INDUSTRIAL CROPS AND PRODUCTS

Effect of Fiber Origin, Proportion, and Chemical Composition on the Mechanical and Physical Properties of Wood-Plastic Composites

(2014) Sebastien Migneault et al.   JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY

Effects of chemical treatments on hemp fibre structure

(2013) M.M. Kabir et al.   APPLIED SURFACE SCIENCE

Color and surface chemistry changes of extracted wood flour after heating at 120 °C

(2013) Yao Chen et al.   WOOD SCIENCE AND TECHNOLOGY

Effects of interfacial modification and fiber content on physical properties of sisal fiber/polypropylene composites

(2012) Sulawan Kaewkuk et al.   COMPOSITES PART B-ENGINEERING

Thermal stability and thermo-mechanical properties of hemp-high density polyethylene composites: Effect of two different chemical modifications

(2012) Na Lu et al.   COMPOSITES PART B-ENGINEERING

Polyolefin composites with natural fibers and wood-modification of the fiber/filler-matrix interaction

(2012) L. Sobczak et al.   JOURNAL OF APPLIED POLYMER SCIENCE

The thermal performance of the polysaccharides extracted from hardwood: Cellulose and hemicellulose

(2010) D.K. Shen et al.   CARBOHYDRATE POLYMERS

Effect of wood species on property and weathering performance of wood plastic composites

(2010) James S. Fabiyi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

FTIR and color change of the modified wood as a result of artificial light irradiation

(2010) Dan Rosu et al.   JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY

Effects of alkali and silane treatment on the mechanical properties of jute-fiber-reinforced recycled polypropylene composites

(2010) Xinxin Wang et al.   JOURNAL OF VINYL & ADDITIVE TECHNOLOGY

Thermal Properties of Composites Made of Heat-treated Wood and Polypropylene

(2009) Alireza Kaboorani   JOURNAL OF COMPOSITE MATERIALS

Experimental (UV, NMR, IR and Raman) and theoretical spectroscopic properties of 2-chloro-6-methylaniline

(2009) Mehmet Karabacak et al.   MOLECULAR PHYSICS

Fabrication and interfacial modification of wood/recycled plastic composite materials

(2008) Yihua Cui et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Feasibility of Using Heat Treated Wood in Wood/Thermoplastic Composites

(2008) Alireza Kaboorani et al.   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

Analysis of Among-Species Variability in Wood Fiber Surface Using DRIFTS and XPS: Effects on Esterification Efficiency

(2008) Hassine Bouafif et al.   JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY

Accelerated weathering of polypropylene/wood flour composites

(2008) F.P. La Mantia et al.   POLYMER DEGRADATION AND STABILITY