The effect of solute segregated stacking faults on the corrosion behavior of Mg-Gd-Cu alloys

The effect of Sr addition on the microstructure and corrosion behaviour of a Mg-Zn-Ca alloy

(2022) Jun Song et al.   SURFACE & COATINGS TECHNOLOGY

Corrosion resistance and degradation behavior of anodized Mg-Gd alloys: A comparative study

(2021) Zebin Geng et al.   SURFACE & COATINGS TECHNOLOGY

Enhanced Degradability of Mg-2Gd Alloy by Alloying Cu

(2021) Shiyu Zhong et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Effects of Indium on corrosion behavior of Mg-Al-Cu alloy

(2021) X.W. Wang et al.   MATERIALS CHARACTERIZATION

A self-healing corrosion protection coating with graphene oxide carrying 8-hydroxyquinoline doped in layered double hydroxide on a micro-arc oxidation coating

(2021) Yanning Chen et al.   CORROSION SCIENCE

Effect of hierarchical precipitates on corrosion behavior of fine-grain magnesium-gadolinium-silver alloy

(2021) Bingqian Xu et al.   CORROSION SCIENCE

Effect of Al addition and heat treatment on the microstructures and corrosion resistance of Mg-Cu alloys

(2021) X.W. Wang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of Ni on the microstructure, mechanical properties and corrosion behavior of MgGd1Nix alloys for fracturing ball applications

(2021) Kai Ma et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Enhanced degradation properties of Mg-Y-Ni alloys by tailoring the LPSO morphology for fracturing tools applications

(2021) Kai Ma et al.   MATERIALS CHARACTERIZATION

Formation of an abnormal texture in Mg-Gd-Y-Zn-Mn alloy and its effect on mechanical properties by altering extrusion parameters

(2021) Kui Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrahigh strength Mg-Y-Ni alloys obtained by regulating second phases

(2020) S.Z. Wu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Enhanced mechanical properties and degradation rate of Mg–Ni–Y alloy by introducing LPSO phase for degradable fracturing ball applications

(2020) Jingfeng Wang et al.   Journal of Magnesium and Alloys

Degradation behavior of Mg-4Zn-2Ni alloy with high strength and high degradation rate

(2020) Hao-yi Niu et al.   MATERIALS CHEMISTRY AND PHYSICS

Microstructure characterization and corrosion behavior of Mg–Y–Zn alloys with different long period stacking ordered structures

(2020) Lisha Wang et al.   Journal of Magnesium and Alloys

Microstructure and corrosion behavior of Mg-Sc binary alloys in 3.5 wt.% NaCl solution

(2020) Cheng Zhang et al.   CORROSION SCIENCE

Preparation and properties of hollow glass microspheres reinforced Mg alloy degradable composites

(2020) Lin Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Investigation of rapidly decomposable AZ91–RE–xCu (x=0, 1, 2, 3, 4) alloys for petroleum fracturing balls

(2020) Baosheng Liu et al.   JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS

Review of Mg alloy corrosion rates

(2020) Andrej Atrens et al.   Journal of Magnesium and Alloys

Improving the corrosion resistance of MgZn1.2Gd Zr0.18 (x = 0, 0.8, 1.4, 2.0) alloys via Gd additions

(2020) Siqi Yin et al.   CORROSION SCIENCE

Effect of Ni addition on the mechanical and degradation properties of hollow glass microsphere/Mg alloy composites

(2020) Lin Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure, mechanical properties and corrosion properties of Mg-4Zn-xNi alloys for degradable fracturing ball applications

(2019) Hao-yi Niu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Experimental and numerical investigations of accumulated plastic deformation in cement sheath during multistage fracturing in shale gas wells

(2019) Yan Xi et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Accelerated degradation rate of AZ31 magnesium alloy by copper additions

(2018) Miao Zhou et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Influence of phase dissolution and hydrogen absorption on the stress corrosion cracking behavior of Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy in 3.5 wt.% NaCl solution

(2018) S.D. Wang et al.   CORROSION SCIENCE

Microstructure, mechanical properties and corrosion behavior of Al-Cu-Mg-Sn-Ga-In alloy

(2018) M.F. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of Ni levels on microstructure and mechanical properties of Mg-Ni-Y alloy reinforced with LPSO structure

(2017) Xiong Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Dissolvable fracturing tool based on a controlled electrolytic method

(2017) Chao Zheng et al.   JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING

Enhanced mechanical properties and degradation rate of Mg-3Zn-1Y based alloy by Cu addition for degradable fracturing ball applications

(2017) Yuezhong Zhang et al.   MATERIALS LETTERS

Microstructure and mechanical properties of Mg-13Gd-2Nd-2Cu alloy

(2017) D.H. Xiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Corrosion behaviours and mechanical properties of Fe/Mg–8Al–1Zn matrix composite

(2017) Lin Chen et al.   MATERIALS SCIENCE AND TECHNOLOGY

Effect of Si addition on microstructure and properties of magnesium alloys with high Al and Zn contents

(2017) M. Wang et al.   VACUUM

Effect of volume fraction of LPSO phases on corrosion and mechanical properties of Mg-Zn-Y alloys

(2017) C.Q. Li et al.   MATERIALS & DESIGN

Ageing behavior of extruded Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt.%) alloy containing LPSO phase and γ′ precipitates

(2017) C. Xu et al.   Scientific Reports

Effect of heat treatment on corrosion behavior of AZ63 magnesium alloy in 3.5 wt.% sodium chloride solution

(2016) Jiarun Li et al.   CORROSION SCIENCE

Microstructure, mechanical properties, and corrosion behavior of degradable Mg-Al-Cu-Zn-Gd alloys

(2016) Zhenwei Geng et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Review of Recent Developments in the Field of Magnesium Corrosion

(2015) Andrej Atrens et al.   ADVANCED ENGINEERING MATERIALS

Phase equilibria of the long-period stacking ordered phase in the Mg–Ni–Y system

(2015) Min Jiang et al.   INTERMETALLICS

Microstructure, mechanical and damping properties of Mg–Er–Gd–Zn alloy reinforced with stacking faults

(2015) Chi Xu et al.   MATERIALS & DESIGN

Effects of copper on the microstructure and properties of Mg-17Al-3Zn alloys

(2015) L. Chen et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Effects of Alloying Elements on Microstructure and Properties of Magnesium Alloys for Tripling Ball

(2015) D. H. Xiao et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

New horizon for high performance Mg-based biomaterial with uniform degradation behavior: Formation of stacking faults

(2015) Jinghuai Zhang et al.   Scientific Reports

Low apparent valence of Mg during corrosion

(2014) Zhiming Shi et al.   CORROSION SCIENCE

Formation of stacking faults for improving the performance of biodegradable Mg–Ho–Zn alloy

(2014) Li Zhang et al.   MATERIALS LETTERS

Degradation behavior of Mg-based biomaterials containing different long-period stacking ordered phases

(2014) Qiuming Peng et al.   Scientific Reports

Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, Sr

(2013) Fuyong Cao et al.   CORROSION SCIENCE

Study of the corrosion mechanism of the in situ grown Mg–Al–CO32− hydrotalcite film on AZ31 alloy

(2012) Jun Chen et al.   CORROSION SCIENCE

Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation

(2009) Zhiming Shi et al.   CORROSION SCIENCE

Microstructural characterisation of as cast and homogenised Mg–Gd–Nd–Zr alloys

(2008) K. Y. Zheng et al.   MATERIALS SCIENCE AND TECHNOLOGY