On thermal management of pouch type lithium-ion batteries by novel designs of wavy minichannel cold plates: Comparison of co-flow with counter-flow

Prediction of battery thermal behaviour in the presence of a constructal theory-based heat pipe (CBHP): A multiphysics model and pattern-based machine learning approach

(2022) Kittinan Boonma et al.   Journal of Energy Storage

Prediction of experimental thermal performance of new designed cold plate for electric vehicles’ Li-ion pouch-type battery with artificial neural network

(2022) Orhan Kalkan et al.   Journal of Energy Storage

An evaluation of the thermal behaviour of a lithium-ion battery pack with a combination of pattern-based artificial neural networks (PBANN) and numerical simulation

(2022) Mehrdad Mesgarpour et al.   Journal of Energy Storage

Heat transfer and flow characteristics of novel patterns of chevron minichannel heat sink: An insight into thermal management of microelectronic devices

(2021) M. Khoshvaght-Aliabadi et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

On thermally managing lithium-ion battery cells by air-convection aspirated in tetrahedral lattice porous cold plates

(2021) Young Woo Son et al.   APPLIED THERMAL ENGINEERING

Heat transfer performance enhancement of liquid cold plate based on mini V-shaped rib for battery thermal management

(2021) Wei Jiang et al.   APPLIED THERMAL ENGINEERING

Analysis of the unsteady thermal response of a Li-ion battery pack to dynamic loads

(2021) Ali Saeed et al.   ENERGY

Experimental investigation of thermal performance of novel cold plate design used in a Li-ion pouch-type battery

(2021) Orhan Kalkan et al.   APPLIED THERMAL ENGINEERING

Investigation on the performance enhancement of baffled cold plate based battery thermal management system

(2021) Chenhui Wu et al.   Journal of Energy Storage

Comparison of lumped and 1D electrochemical models for prismatic 20Ah LiFePO4 battery sandwiched between minichannel cold-plates

(2021) Sandeep Dattu Chitta et al.   APPLIED THERMAL ENGINEERING

A new design for hybrid cooling of Li-ion battery pack utilizing PCM and mini channel cold plates

(2021) Sepehr Mousavi et al.   APPLIED THERMAL ENGINEERING

Effects of cross-section geometry on performance of corrugated miniature heat sink: Uniform, convergent, divergent, and hybrid cases

(2021) M. Khoshvaght-Aliabadi et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Topology optimization design and numerical analysis on cold plates for lithium-ion battery thermal management

(2021) Fan Chen et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Enhancement of lithium-ion battery thermal management with the divergent-shaped channel cold plate

(2021) Wei Kong et al.   Journal of Energy Storage

Bidirectional symmetrical parallel mini-channel cold plate for energy efficient cooling of large battery packs

(2021) Yiming Chen et al.   ENERGY

High Reynold’s Number Turbulent Model for Micro-Channel Cold Plate Using Reverse Engineering Approach for Water-Cooled Battery in Electric Vehicles

(2020) Satyam Panchal et al.   Energies

Thermal analysis of a 6s4p Lithium-ion battery pack cooled by cold plates based on a multi-domain modeling framework

(2020) Hongya Zhang et al.   APPLIED THERMAL ENGINEERING

On the unsteady forced convection in porous media subject to inlet flow disturbances-A pore-scale analysis

(2020) Rabeeah Habib et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Investigation on thermal performance of water-cooled Li-ion pouch cell and pack at high discharge rate with U-turn type microchannel cold plate

(2020) Mahesh Suresh Patil et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Configuration, design, and optimization of air-cooled battery thermal management system for electric vehicles: A review

(2020) A.A. Hakeem Akinlabi et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Mini-channel cold plate with nano phase change material emulsion for Li-ion battery under high-rate discharge

(2020) Jiahao Cao et al.   APPLIED ENERGY

Parametric investigation to optimize the thermal management of pouch type lithium-ion batteries with mini-channel cold plates

(2020) Kokkula Monika et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Introducing new designs of minichannel cold plates for the cooling of Lithium-ion batteries

(2020) T. Amalesh et al.   JOURNAL OF POWER SOURCES

A critical review of battery thermal performance and liquid based battery thermal management

(2019) Weixiong Wu et al.   ENERGY CONVERSION AND MANAGEMENT

A Parametric Study for Optimization of Minichannel Based Battery Thermal Management System

(2019) Z. An et al.   APPLIED THERMAL ENGINEERING

The effects of exothermic catalytic reactions upon combined transport of heat and mass in porous microreactors

(2019) Graeme Hunt et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Experimental investigation of the thermal performance of silicon cold plate for battery thermal management system

(2019) Xinxi Li et al.   APPLIED THERMAL ENGINEERING

A novel approach for Lithium-ion battery thermal management with streamline shape mini channel cooling plates

(2019) Yuqi Huang et al.   APPLIED THERMAL ENGINEERING

Thermal performance of lithium ion battery pack by using cold plate

(2019) Tao Deng et al.   APPLIED THERMAL ENGINEERING

Design optimization of bifurcating mini-channels cooling plate for rectangular Li-ion battery

(2019) Tao Deng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical investigation on a lithium ion battery thermal management utilizing a serpentine-channel liquid cooling plate exchanger

(2019) Lei Sheng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Numerical study and optimizing on cold plate splitter for lithium battery thermal management system

(2019) Xiaoming Xu et al.   APPLIED THERMAL ENGINEERING

Eccentricity effects of heat source inside a porous annulus on the natural convection heat transfer and entropy generation of Cu-water nanofluid

(2019) Payam Gholamalipour et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Heat transfer enhancement in a flat plate solar collector with different flow path shapes using nanofluid

(2019) Mohammad Reza Saffarian et al.   RENEWABLE ENERGY

Research progress on power battery cooling technology for electric vehicles

(2019) Mengyao Lu et al.   Journal of Energy Storage

Thermal and electrical performance evaluations of series connected Li-ion batteries in a pack with liquid cooling

(2018) M. Malik et al.   APPLIED THERMAL ENGINEERING

A comparative study of thermal runaway of commercial lithium ion cells

(2018) Andriy Kvasha et al.   ENERGY

Study on thermal management of rectangular Li-ion battery with serpentine-channel cold plate

(2018) Tao Deng et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Heat transfer characteristics of the integrated heating system for cabin and battery of an electric vehicle under cold weather conditions

(2018) Jae-Hyeong Seo et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Investigation on thermal performance and pressure loss of the fluid cold-plate used in thermal management system of the battery pack

(2018) Jiaqiang E et al.   APPLIED THERMAL ENGINEERING

Three-dimensional thermal modeling of Li-ion battery cell and 50 V Li-ion battery pack cooled by mini-channel cold plate

(2018) Yubai Li et al.   APPLIED THERMAL ENGINEERING

Numerical analysis of mixed convection of two-phase non-Newtonian nanofluid flow inside a partially porous square enclosure with a rotating cylinder

(2018) Majid Siavashi et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

First and second law analyses of nanofluid forced convection in a partially-filled porous channel – The effects of local thermal non-equilibrium and internal heat sources

(2016) Craig Dickson et al.   APPLIED THERMAL ENGINEERING

Comparison of different cooling methods for lithium ion battery cells

(2016) Dafen Chen et al.   APPLIED THERMAL ENGINEERING

Generation of entropy and forced convection of heat in a conduit partially filled with porous media – Local thermal non-equilibrium and exothermicity effects

(2016) Mohsen Torabi et al.   APPLIED THERMAL ENGINEERING

Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling

(2016) Zhen Qian et al.   ENERGY CONVERSION AND MANAGEMENT

Water cooled corrugated minichannel heat sink for electronic devices: Effect of corrugation shape

(2016) Morteza Khoshvaght-Aliabadi et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles

(2016) Qian Wang et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Investigation of power battery thermal management by using mini-channel cold plate

(2015) Yutao Huo et al.   ENERGY CONVERSION AND MANAGEMENT

Correlating uncertainties of a lithium-ion battery - A Monte Carlo simulation

(2015) Wei Tong et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Role of channel shape on performance of plate-fin heat exchangers: Experimental assessment

(2014) M. Khoshvaght-Aliabadi et al.   INTERNATIONAL JOURNAL OF THERMAL SCIENCES

Effect of Wave-and-Lance Length Variations on Performance of Wavy and Offset Strip Plate-Fin Heat Exchangers

(2013) Morteza Khoshvaght-Aliabadi et al.   ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING

Thermal runaway caused fire and explosion of lithium ion battery

(2012) Qingsong Wang et al.   JOURNAL OF POWER SOURCES

Design optimization of electric vehicle battery cooling plates for thermal performance

(2011) Anthony Jarrett et al.   JOURNAL OF POWER SOURCES

Analysis of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger

(2008) H. Bhowmik et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER