Recrystallization and grain growth behavior of variously deformed CoCrFeMnNi high-entropy alloys: microstructure characterization and modeling

Successive strain hardening mechanisms induced by transformation induced plasticity in Fe60Mn20Co10Cr10 high entropy alloys

(2021) Tianyu Gao et al.   JOURNAL OF APPLIED PHYSICS

Microstructural evolution and strengthening mechanisms in CrxMnFeNi high-entropy alloy

(2021) Youyou Zhang et al.   Journal of Materials Research and Technology-JMR&T

Characteristics of dynamic softening during high temperature deformation of CoCrFeMnNi high-entropy alloy and its correlation with the evolving microstructure and micro-texture

(2021) Sumit Ghosh et al.   Journal of Materials Research and Technology-JMR&T

Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment

(2021) H.G. Li et al.   Additive Manufacturing

Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying

(2020) Jin-Kun Xiao et al.   SURFACE & COATINGS TECHNOLOGY

Evaluation of microstructure and texture formation during annealing of cold-rolled FeCrCuMnNi multiphase high-entropy alloy

(2020) Ali SHABANI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Microstructures, tensile properties and serrated flow of Al CrMnFeCoNi high entropy alloys

(2020) Jun XU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Tensile properties and microstructure evolution during two-stage tensile testing of CoCrFeMnNi high-entropy alloy

(2020) Taesung Park et al.   Journal of Materials Research and Technology-JMR&T

Tensile deformation behavior and mechanical properties of a bulk cast Al0.9CoFeNi2 eutectic high-entropy alloy

(2020) Hui Jiang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of 1Al addition on deformation behavior of Mg

(2020) Ji Hyun Hwang et al.   Journal of Magnesium and Alloys

Grain growth kinetics in CoCrFeNi and CoCrFeMnNi high entropy alloys processed by spark plasma sintering

(2019) M. Vaidya et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy

(2019) Murugesan Annasamy et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Annealing Temperature on Microstructure and Mechanical Properties of a Severe Cold-Rolled FeCoCrNiMn High-Entropy Alloy

(2019) Ziyong Li et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite

(2019) M.H. Mohammad Ebrahimi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Grain growth and Hall-Petch relationship in a refractory HfNbTaZrTi high-entropy alloy

(2019) Shuying Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Rolling asymmetry effects on recrystallization process and on properties and microstructure of annealed copper

(2019) A. Uniwersał et al.   MATERIALS CHARACTERIZATION

Parameter identification of engineering problems using a differential shuffled complex evolution

(2019) Babak Pourasghar et al.   ARTIFICIAL INTELLIGENCE REVIEW

Grain boundary engineering parameters for ultrafine grained microstructures: Proof of principles by a systematic composition variation in the Cu-Ni system

(2018) Friederike Emeis et al.   ACTA MATERIALIA

Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys

(2018) M. Vaidya et al.   ACTA MATERIALIA

Parameter extraction of solar cell models using improved shuffled complex evolution algorithm

(2018) Xiankun Gao et al.   ENERGY CONVERSION AND MANAGEMENT

Stacking fault energy of face-centered-cubic high entropy alloys

(2018) S.F. Liu et al.   INTERMETALLICS

Microstructures and mechanical properties of Ti x NbMoTaW refractory high-entropy alloys

(2018) Z.D. Han et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Entropy Determination of Single-Phase High Entropy Alloys with Different Crystal Structures over a Wide Temperature Range

(2018) Sebastian Haas et al.   Entropy

The Magnetic, Electronic, and Thermodynamic Properties of High Entropy Alloy CrMnFeCoNi: A First-Principles Study

(2018) Shuo Wang et al.   PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS

Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures

(2018) Junpeng Liu et al.   Science China-Materials

Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior

(2018) Zhiming Li   ACTA MATERIALIA

Strength–ductility balance in an ultrafine-grained non-equiatomic Fe50(CoCrMnNi)50 medium-entropy alloy with a fully recrystallized microstructure

(2018) Minku Choi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Predicting recrystallized grain size in friction stir processed 304L stainless steel

(2018) M.P. Miles et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy

(2017) I.S. Wani et al.   INTERMETALLICS

Crystallization kinetics in Al x CrCoFeNi (0 ≤ x ≤ 40) high-entropy alloys

(2017) Aayush Sharma et al.   SCRIPTA MATERIALIA

Enhanced strength and ductility of bulk CoCrFeMnNi high entropy alloy having fully recrystallized ultrafine-grained structure

(2017) S.J. Sun et al.   MATERIALS & DESIGN

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

(2016) G. Laplanche et al.   ACTA MATERIALIA

The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures

(2016) DongYue Li et al.   INTERMETALLICS

Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy

(2016) G. Dan Sathiaraj et al.   INTERMETALLICS

Microstructure and wear behavior of a refractory high entropy alloy

(2016) A. Poulia et al.   INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS

Investigations of the microstructural response to a cold forging process of the 6082-T6 alloy

(2015) J. Bouquerel et al.   MATERIALS & DESIGN

Application of FEG-SEM and EBSD Methods for the Analysis of the Restoration Processes Occurring During Continuous Annealing of Dual-Phase Steel Strips

(2015) Krzysztof Radwański   STEEL RESEARCH INTERNATIONAL

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy

(2013) C. Zhu et al.   ACTA MATERIALIA

Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy

(2013) P.P. Bhattacharjee et al.   JOURNAL OF ALLOYS AND COMPOUNDS

EBSD study of a hot deformed austenitic stainless steel

(2012) H. Mirzadeh et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy

(2012) W.H. Liu et al.   SCRIPTA MATERIALIA

Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD

(2010) Rika Yoda et al.   MATERIALS CHARACTERIZATION

Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques

(2008) Sumantra Mandal et al.   PHILOSOPHICAL MAGAZINE

The influence of trace boron addition on grain growth kinetics of the beta phase in the beta titanium alloy Ti–15Mo–2.6Nb–3Al–0.2Si

(2008) B CHERUKURI et al.   SCRIPTA MATERIALIA