Nanoindentation Investigation of Chloride-Induced Stress Corrosion Crack Propagation in an Austenitic Stainless Steel Weld

Grain refinement strengthening mechanism of an austenitic stainless steel: critically analyze the impacts of grain interior and grain boundary

(2022) Rui Ke et al.   Journal of Materials Research and Technology-JMR&T

Mechanism of chlorine-induced stress corrosion cracking of two 304 SS heats in simulated marine environment through in situ X-ray tomography and diffraction: Role of deformation induced martensite and crack branching

(2022) Ryan Schoell et al.   MATERIALS CHARACTERIZATION

Crystallographic orientation data from chloride-induced stress corrosion crack (CISCC) paths in gas tungsten arc welded (GTAW) austenitic stainless steel 304L

(2022) Haozheng J. Qu et al.   Data in Brief

Stress corrosion cracking mechanism of cold spray coating on a galvanically similar substrate

(2022) Haozheng J. Qu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An Analytical Model for Oblique Cross Section Nanoindentation of Ion‐Irradiated Metallic Alloys Based on Studies of Oxide Dispersion Strengthened Steel MA957

(2021) Dhriti Bhattacharyya et al.   ADVANCED ENGINEERING MATERIALS

A study on the diffusion-induced grain boundary migration ahead of stress corrosion cracking crack tips through advanced characterization

(2021) Zhao Shen et al.   CORROSION SCIENCE

Comparison of ion irradiation effects in PM-HIP and forged alloy 625

(2021) Caleb Clement et al.   JOURNAL OF NUCLEAR MATERIALS

Correlation between Grain Boundary Migration and Stress Corrosion Cracking of Alloy 600 in Hydrogenated Steam

(2020) L. Volpe et al.   ACTA MATERIALIA

In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking

(2020) Ryan Schoell et al.   CORROSION SCIENCE

Micromechanical testing of unirradiated and helium ion irradiated SA508 reactor pressure vessel steels: Nanoindentation vs in-situ microtensile testing

(2020) C. Gasparrini et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of Salt Composition and Microstructure on Stress Corrosion Cracking of 316L Austenitic Stainless Steel for Dry Storage Canisters

(2020) P. Dong et al.   JOURNAL OF NUCLEAR MATERIALS

Atmospheric stress corrosion crack growth rates of 316 L stainless steel for nuclear waste containment

(2020) Y. Zhang et al.   CORROSION SCIENCE

Characterization of the crack initiation and propagation in Alloy 600 with a cold-worked surface

(2019) Zhao Shen et al.   CORROSION SCIENCE

Effect of slip transmission at grain boundaries in Al bicrystals

(2019) S. Haouala et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Irradiation-assisted stress corrosion cracking susceptibility and mechanical properties related to irradiation-induced microstructures of 304L austenitic stainless steel

(2019) Elie Paccou et al.   JOURNAL OF NUCLEAR MATERIALS

Role of cavities on deformation-induced martensitic transformation pathways in a laser-welded, neutron irradiated austenitic stainless steel

(2019) Keyou S. Mao et al.   SCRIPTA MATERIALIA

Stress corrosion cracking initiation and short crack growth behaviour in Alloy 182 weld metal under simulated boiling water reactor hydrogen water chemistry conditions

(2018) Juxing Bai et al.   CORROSION SCIENCE

Direct comparison of nanoindentation and tensile test results on reactor-irradiated materials

(2018) D.L. Krumwiede et al.   JOURNAL OF NUCLEAR MATERIALS

An analytical method to extract irradiation hardening from nanoindentation hardness-depth curves

(2018) A. Kareer et al.   JOURNAL OF NUCLEAR MATERIALS

Microstructure-property relationship for AISI 304/308L stainless steel laser weldment

(2018) Keyou Mao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparative Study of Two Nanoindentation Approaches for Assessing Mechanical Properties of Ion-Irradiated Stainless Steel 316

(2018) Michael Saleh et al.   Metals

A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing

(2018) P. Sudharshan Phani et al.   MATERIALS & DESIGN

Observation and quantification of the diffusion-induced grain boundary migration ahead of SCC crack tips

(2018) Zhao Shen et al.   CORROSION SCIENCE

Accelerated Stress Corrosion Crack Initiation of Alloys 600 and 690 in Hydrogenated Supercritical Water

(2017) Tyler Moss et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

A mechanistic study of the temperature dependence of the stress corrosion crack growth rate in SUS316 stainless steels exposed to PWR primary water

(2016) Martina Meisnar et al.   ACTA MATERIALIA

Plastic zone size for nanoindentation of irradiated Fe–9%Cr ODS

(2016) Corey K. Dolph et al.   JOURNAL OF NUCLEAR MATERIALS

Stress corrosion cracking behaviour of 7xxx aluminum alloys: A literature review

(2016) A.C. UMAMAHESHWER RAO et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Atom probe tomography of stress corrosion crack tips in SUS316 stainless steels

(2015) Martina Meisnar et al.   CORROSION SCIENCE

The mechanical behavior during nanoindentation near the grain boundary in a bicrystal FCC metal

(2015) George Z. Voyiadjis et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Assessing the risk of under-deposit chloride-induced stress corrosion cracking in austenitic stainless steel nuclear waste containers

(2014) A. B. Cook et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Grain boundary structure and intergranular stress corrosion crack initiation in high temperature water of a thermally sensitised austenitic stainless steel, observed in situ

(2014) Alisa Stratulat et al.   CORROSION SCIENCE

The initiation and propagation of chloride-induced transgranular stress-corrosion cracking (TGSCC) of 304L austenitic stainless steel under atmospheric conditions

(2014) D.T. Spencer et al.   CORROSION SCIENCE

Corrosion pitting and environmentally assisted small crack growth

(2014) A. Turnbull   PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES

Stress corrosion cracking in 316L stainless steel bellows of a pressure safety valve

(2013) Bijayani Panda et al.   ENGINEERING FAILURE ANALYSIS

Characterization of microstructure and local deformation in 316NG weld heat-affected zone and stress corrosion cracking in high temperature water

(2011) Zhanpeng Lu et al.   CORROSION SCIENCE

Energy of slip transmission and nucleation at grain boundaries

(2010) Michael D. Sangid et al.   ACTA MATERIALIA

Localized deformation as a key precursor to initiation of intergranular stress corrosion cracking of austenitic stainless steels employed in nuclear power plants

(2010) Wade Karlsen et al.   JOURNAL OF NUCLEAR MATERIALS

Incipient plasticity of twin and stable/unstable grain boundaries during nanoindentation in copper

(2010) T. Tsuru et al.   PHYSICAL REVIEW B

Advanced TEM characterization of stress corrosion cracking of Alloy 600 in pressurized water reactor primary water environment

(2009) M. Sennour et al.   JOURNAL OF NUCLEAR MATERIALS

Nanoindentation on ion irradiated steels

(2009) P. Hosemann et al.   JOURNAL OF NUCLEAR MATERIALS

Fundamental interaction process between pure edge dislocation and energetically stable grain boundary

(2009) T. Tsuru et al.   PHYSICAL REVIEW B

Stress corrosion cracking of stainless-steel canister for concrete cask storage of spent fuel

(2008) Jun-ichi Tani et al.   JOURNAL OF NUCLEAR MATERIALS

Failure analysis of a stainless steel pipeline

(2007) M. Suresh Kumar et al.   ENGINEERING FAILURE ANALYSIS