Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

(2022) Pei Wang et al.   HIGH PERFORMANCE POLYMERS

Investigation on the mechanical properties of additively manufactured PETG composites reinforced with OMMT nanoclay and carbon fibers

(2021) Vinyas Mahesh et al.   POLYMER COMPOSITES

Investigation of 3D printing strategy on the mechanical performance of coextruded continuous carbon fiber reinforced PETG

(2021) Samir Kasmi et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Mechanical properties of 3D printed mouthguards: Influence of layer height and device thickness

(2021) Ana M. Sousa et al.   MATERIALS & DESIGN

Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours

(2021) I. Tirado-Garcia et al.   COMPOSITE STRUCTURES

Investigations into the effect of thermal annealing on fused filament fabrication process

(2021) Ribin Varghese Pazhamannil et al.   Advances in Materials and Processing Technologies

Advanced functional Kevlar composite with excellent mechanical properties for thermal management and intelligent safeguarding

(2021) Jianyu Zhou et al.   CHEMICAL ENGINEERING JOURNAL

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

(2020) Peng WANG et al.   Chinese Journal of Aeronautics

Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology

(2020) Anouar El Magri et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Toward the understanding of temperature effect on bonding strength, dimensions and geometry of 3D-printed parts

(2020) H. R. Vanaei et al.   JOURNAL OF MATERIALS SCIENCE

Recent developments in polymers/polymer nanocomposites for additive manufacturing

(2020) H. Wu et al.   PROGRESS IN MATERIALS SCIENCE

Thermal insulation behaviour of Ethylene propylene diene monomer rubber/kevlar fiber based hybrid composites containing Nanosilica for solid rocket motor insulation

(2020) Kesiya George et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Study of the annealing influence on the mechanical performance of PA12 and PA12 fibre reinforced FFF printed specimens

(2020) Isaac Ferreira et al.   RAPID PROTOTYPING JOURNAL

Improvement of flexural strength and compressive strength by heat treatment of PLA filament for 3D-printing

(2019) Jeong-Hyo Hong et al.   MODERN PHYSICS LETTERS B

Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process

(2019) Leipeng Yang et al.   SYNTHETIC METALS

Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling

(2019) Sofiane Guessasma et al.   Polymers

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

(2019) Peng Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

(2019) Shouling Ding et al.   POLYMER TESTING

Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing

(2019) Sunil Bhandari et al.   Additive Manufacturing

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

(2018) Tuan D. Ngo et al.   COMPOSITES PART B-ENGINEERING

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

(2018) А.А. Stepashkin et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing

(2018) Radoslaw A. Wach et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

FDM process parameters influence over the mechanical properties of polymer specimens: A review

(2018) Diana Popescu et al.   POLYMER TESTING

Mechanical and Dynamic Behavior of Fused Filament Fabrication 3D Printed Polyethylene Terephthalate Glycol Reinforced with Carbon Fibers

(2018) M. Mansour et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment

(2018) Aboma Gebisa et al.   Materials

Fatigue performance of fused filament fabrication PLA specimens

(2018) Giovanni Gomez-Gras et al.   MATERIALS & DESIGN

Additive manufacturing of polyethylene terephthalate glycol /carbon fiber composites: An experimental study from filament to printed parts

(2018) Isaac Ferreira et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS

Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament

(2018) Peng Geng et al.   Journal of Manufacturing Processes

Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

(2017) Chuncheng Yang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints

(2017) Volkan Kovan et al.   Journal of Mechanical Science and Technology

Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites

(2017) S. Berretta et al.   POLYMER TESTING

3D printing with polymers: Challenges among expanding options and opportunities

(2016) Jeffrey W. Stansbury et al.   DENTAL MATERIALS

A design of experiments approach to optimise tensile and notched bending properties of fused deposition modelling parts

(2016) Chrisian A Griffiths et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

The effects of recycling on the properties of carbon nanotube-filled polypropylene composites and worker exposures

(2016) Jinde Zhang et al.   Environmental Science-Nano

Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques

(2016) Michael Dawoud et al.   Journal of Manufacturing Processes

Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing

(2016) Miguel Fernandez-Vicente et al.   3D Printing and Additive Manufacturing

Process planning for additive and subtractive manufacturing technologies

(2015) Stephen T. Newman et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling

(2015) Fuda Ning et al.   COMPOSITES PART B-ENGINEERING

Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives

(2015) Jonathan Torres et al.   JOM

Fused deposition modeling with polypropylene

(2015) O.S. Carneiro et al.   MATERIALS & DESIGN

Optimization of fused deposition modeling process parameters: a review of current research and future prospects

(2015) Omar A. Mohamed et al.   Advances in Manufacturing

Polymer Nanofibers with Outstanding Thermal Conductivity and Thermal Stability: Fundamental Linkage between Molecular Characteristics and Macroscopic Thermal Properties

(2014) Teng Zhang et al.   Journal of Physical Chemistry C

Effects of two aqueous acidic solutions on polyester and bisphenol A epoxy vinyl ester resins

(2010) M.H. Banna et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Parametric appraisal of mechanical property of fused deposition modelling processed parts

(2009) Anoop Kumar Sood et al.   MATERIALS & DESIGN

Effect of processing conditions on the bonding quality of FDM polymer filaments

(2008) Q. Sun et al.   RAPID PROTOTYPING JOURNAL