The Effect of Physical Aging and Degradation on the Re-Use of Polyamide 12 in Powder Bed Fusion

Multiscale analysis of the thermal degradation of polyamide 6,6: Correlating chemical structure to mechanical properties

(2021) M. Pliquet et al.   POLYMER DEGRADATION AND STABILITY

Effects of polyamide-11 powder refresh ratios in multi-jet fusion: A comparison of new and used powder

(2021) Chrysoula Pandelidi et al.   Additive Manufacturing

Modeling temporal and spatial changes during hydrolytic degradation and erosion in biodegradable polymers

(2020) Mitchell F. Shockley et al.   POLYMER DEGRADATION AND STABILITY

Study of the annealing influence on the mechanical performance of PA12 and PA12 fibre reinforced FFF printed specimens

(2020) Isaac Ferreira et al.   RAPID PROTOTYPING JOURNAL

A process control and interlayer heating approach to reuse polyamide 12 powders and create parts with improved mechanical properties in selective laser sintering

(2020) Feifei Yang et al.   Journal of Manufacturing Processes

Disclosing the build-up mechanisms of multi jet fusion: Experimental insight into the characteristics of starting materials and finished parts

(2020) Manuela Galati et al.   Journal of Manufacturing Processes

Modelling pure polyamide 6 hydrolysis: Influence of water content in the amorphous phase

(2020) Q. Deshoulles et al.   POLYMER DEGRADATION AND STABILITY

Comparative study on 3D printing of polyamide 12 by selective laser sintering and multi jet fusion

(2020) Chao Cai et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Physicochemical and mechanical degradation of polyamide 11 induced by hydrolysis and thermal aging

(2019) S. Maïza et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Influence of post-condensation on the crystallization kinetics of PA12: From virgin to reused powder

(2019) F. Paolucci et al.   POLYMER

Selective laser sintering and multi jet fusion: Process-induced modification of the raw materials and analyses of parts performance

(2019) Francesco Sillani et al.   Additive Manufacturing

Analysis of material aging and the influence on the mechanical properties of polyamide 12 in the Multi Jet Fusion process

(2019) Julius Riedelbauch et al.   Additive Manufacturing

Process of selective laser sintering of polymer powders: Modeling, simulation, and validation

(2018) Aoulaiche Mokrane et al.   COMPTES RENDUS MECANIQUE

Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts

(2017) Sasan Dadbakhsh et al.   EUROPEAN POLYMER JOURNAL

Experimental analysis and modeling of local ageing effects during laser sintering of polyamide 12 in regard to individual thermal histories

(2017) Stefan Josupeit et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization

(2017) Imen Ksouri et al.   JOURNAL OF POLYMER RESEARCH

Autocatalysis in thermal decomposition of polymers

(2017) A. Yu. Snegirev et al.   POLYMER DEGRADATION AND STABILITY

Thermo-oxidative ageing effect on mechanical properties and morphology of short fibre reinforced polyamide composites – comparison of carbon and glass fibres

(2017) Lin Sang et al.   RSC Advances

Investigation of polyamide 11 embrittlement during oxidative degradation

(2016) Octavie Okamba-Diogo et al.   POLYMER

Crystallization kinetics of new low viscosity polyamides 66 for thermoplastic composites processing

(2016) Jalal Faraj et al.   THERMOCHIMICA ACTA

Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties

(2016) S. Berretta et al.   MATERIALS & DESIGN

Review: Auto-oxidation of aliphatic polyamides

(2013) Emmanuel Richaud et al.   POLYMER DEGRADATION AND STABILITY

Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering

(2012) Stéphane Dupin et al.   EUROPEAN POLYMER JOURNAL

Selective laser sintering and its application in biomedical engineering

(2011) Bin Duan et al.   MRS BULLETIN

Laser sintering of polyamides and other polymers

(2011) R.D. Goodridge et al.   PROGRESS IN MATERIALS SCIENCE

Influence of temperature on the thermo-oxidative degradation of polyamide 6 films

(2010) Weifu Dong et al.   POLYMER DEGRADATION AND STABILITY

Effect of long-term ageing on the tensile properties of a polyamide 12 laser sintering material

(2010) R.D. Goodridge et al.   POLYMER TESTING

Recycling of polyamide 12 based powders in the laser sintering process

(2009) Krassimir Dotchev et al.   RAPID PROTOTYPING JOURNAL

Deterioration of polyamide powder properties in the laser sintering process

(2008) D T Pham et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE