Additive manufacturing of polyetheretherketone and its composites: A review
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Additive manufacturing of polyetheretherketone and its composites: A review
Authors
Keywords
-
Journal
POLYMER COMPOSITES
Volume -, Issue -, Pages -
Publisher
Wiley
Online
2022-08-06
DOI
10.1002/pc.26961
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Development of Bioglass/PEEK Composite Coating by Cold Gas Spray for Orthopedic Implants
- (2022) B. Garrido et al. JOURNAL OF THERMAL SPRAY TECHNOLOGY
- Improvement in Mechanical Properties of 3D‐Printed PEEK Structure by Nonsolvent Vapor Annealing
- (2022) Wenhui Chen et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation
- (2022) Cho-Pei Jiang et al. RAPID PROTOTYPING JOURNAL
- Influence of preheating temperature and printing speed on interlaminar shear performance of laser‐assisted additive manufacturing for CCF / PEEK composites
- (2022) Yiwei Chen et al. POLYMER COMPOSITES
- Current trends, applications, and challenges of coatings on additive manufacturing based biopolymers: A state of art review
- (2022) Shrutika Sharma et al. POLYMER COMPOSITES
- Poly ether ether ketone and its composite powder prepared by thermally induced phase separation for high temperature selective laser sintering
- (2021) Yuan Wang et al. MATERIALS & DESIGN
- Bioinspired Modifications of PEEK Implants for Bone Tissue Engineering
- (2021) Xinming Gu et al. Frontiers in Bioengineering and Biotechnology
- Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review
- (2021) Shivam Verma et al. EUROPEAN POLYMER JOURNAL
- Evaluating poly(ether ether ketone) powder recyclability for selective laser sintering applications
- (2021) Akanksha Patel et al. POLYMER DEGRADATION AND STABILITY
- 3D printing: rapid manufacturing of a new small-scale tidal turbine blade
- (2021) Marwane Rouway et al. The International Journal of Advanced Manufacturing Technology
- Ambient temperature sulfonated carbon fiber reinforced PEEK with hydroxyapatite and reduced graphene oxide hydroxyapatite composite coating
- (2021) Naomi Addai Asante et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- 3D printing of PEEK and its composite to increase biointerfaces as a biomedical material- A review
- (2021) Bankole I. Oladapo et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- 3D printed PEEK/HA composites for bone tissue engineering applications: Effect of material formulation on mechanical performance and bioactive potential
- (2021) Faisal Manzoor et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of printing path and material components on mechanical properties of 3D-printed polyether-ether-ketone/hydroxyapatite composites
- (2021) Jibao Zheng et al. Journal of the Mechanical Behavior of Biomedical Materials
- Improving bioactivity and strength of PEEK composite polymer for bone application
- (2021) Bankole I. Oladapo et al. MATERIALS CHEMISTRY AND PHYSICS
- Effect of hydroxyapatite content and particle size on the mechanical behaviors and osteogenesis in vitro of polyetheretherketone–hydroxyapatite composite
- (2021) Shuai Li et al. POLYMER COMPOSITES
- Graphene reinforced polyether ether ketone nanocomposites for bone repair applications
- (2021) Nan Jiang et al. POLYMER TESTING
- Mechanical Properties and Bioactivity of Polyetheretherketone/Hydroxyapatite/Carbon Fiber Composite Prepared by the Mechanofusion Process
- (2021) In Sung Jeon et al. Polymers
- Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites
- (2021) K. Rodzeń et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- The Surface Characteristics, Microstructure and Mechanical Properties of PEEK Printed by Fused Deposition Modeling with Different Raster Angles
- (2021) Sasa Gao et al. Polymers
- The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites
- (2021) Krzysztof Rodzeń et al. Polymers
- A multimodal optical approach for investigating 3D-printed carbon PEEK composites
- (2021) V. Pagliarulo et al. OPTICS AND LASERS IN ENGINEERING
- Graphene Oxide and Adiponectin-Functionalized Sulfonated Poly(etheretherketone) with Effective Osteogenicity and Remotely Repeatable Photodisinfection
- (2020) Yi Deng et al. CHEMISTRY OF MATERIALS
- Fabrication and characterization of an electrostatically bonded PEEK‐ hydroxyapatite composites for biomedical applications
- (2020) Fatih Erdem Baştan JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Surface Modifications of Poly(Ether Ether Ketone) via Polymerization Methods—Current Status and Future Prospects
- (2020) Monika Flejszar et al. Materials
- Bioactive amorphous magnesium phosphate-polyetheretherketone composite filaments for 3D printing
- (2020) Prabaha Sikder et al. DENTAL MATERIALS
- Macro-Microporous Surface with Sulfonic Acid Groups and Micro-Nano Structures of PEEK/Nano Magnesium Silicate Composite Exhibiting Antibacterial Activity and Inducing Cell Responses
- (2020) Yunfei Niu et al. International Journal of Nanomedicine
- PEEK modified PLA shape memory blends: towards enhanced mechanical and deformation properties
- (2020) Lan Zhang et al. Frontiers of Materials Science
- Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK
- (2020) Peng WANG et al. Chinese Journal of Aeronautics
- Mechanical characterization of biocompatible PEEK by FDM
- (2020) Yachen Zhao et al. Journal of Manufacturing Processes
- Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing
- (2020) Peng Wang et al. COMPOSITES PART B-ENGINEERING
- 3D printed porous PEEK created via fused filament fabrication for osteoconductive orthopaedic surfaces
- (2020) H. Spece et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber reinforced PEEK composites
- (2020) Baoning Chang et al. POLYMER COMPOSITES
- Lattice design and 3D-printing of PEEK with Ca10(OH)(PO4)3 and in-vitro bio-composite for bone implant
- (2020) Bankole I. Oladapo et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Strontium ranelate incorporated 3D porous sulfonated PEEK simulating MC3T3-E1 cell differentiation
- (2020) Yingxiao Sun et al. Regenerative Biomaterials
- Coating of Polyetheretherketone Films with Silver Nanoparticles by a Simple Chemical Reduction Method and Their Antibacterial Activity
- (2019) Andrés Cruz-Pacheco et al. Coatings
- Effects of magnesium coating on bone-implant interfaces with and without polyether-ether-ketone particle interference: A rabbit model based on porous Ti6Al4V implants
- (2019) Zhe Du et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- 3D printing of polyether-ether-ketone for biomedical applications
- (2019) Sunpreet Singh et al. EUROPEAN POLYMER JOURNAL
- Evolution of crystallinity of PEEK and glass-fibre reinforced PEEK under tribological conditions using Raman spectroscopy
- (2019) M. Doumeng et al. WEAR
- Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications
- (2019) Xingting Han et al. Journal of Clinical Medicine
- Drug-loaded/grafted peptide-modified porous PEEK to promote bone tissue repair and eliminate bacteria
- (2019) Xianhua He et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
- (2019) Shouling Ding et al. POLYMER TESTING
- Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts
- (2019) Bin Hu et al. MECHANICS OF MATERIALS
- Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing
- (2019) M.F. Arif et al. COMPOSITES PART B-ENGINEERING
- Enhancement of tribofilm formation from water lubricated PEEK composites by copper nanowires
- (2018) Chuanping Gao et al. APPLIED SURFACE SCIENCE
- Custom design and biomechanical analysis of 3D-printed PEEK rib prostheses
- (2018) Jianfeng Kang et al. Biomechanics and Modeling in Mechanobiology
- Electrophoretic co-deposition of PEEK-hydroxyapatite composite coatings for biomedical applications
- (2018) Fatih E. Baştan et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Additive layer manufacturing of poly (ether ether ketone) via FDM
- (2018) Marianna Rinaldi et al. COMPOSITES PART B-ENGINEERING
- 3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties
- (2018) А.А. Stepashkin et al. COMPOSITES SCIENCE AND TECHNOLOGY
- High temperature rheological behavior and sintering kinetics of CF/PEEK composites during selective laser sintering
- (2018) Mengxue Yan et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Bioinspired, biocompatible and peptide-decorated silk fibroin coatings for enhanced osteogenesis of bioinert implant
- (2018) Chunyan Wang et al. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
- Biomechanical, histological, and computed X-ray tomographic analyses of hydroxyapatite coated PEEK implants in an extended healing model in rabbit
- (2018) Pär Johansson et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Macromol. Biosci. 6/2018
- (2018) Giuseppe Pezzotti et al. MACROMOLECULAR BIOSCIENCE
- Microwave assisted coating of bioactive amorphous magnesium phosphate (AMP) on polyetheretherketone (PEEK)
- (2018) Yufu Ren et al. Materials Science & Engineering C-Materials for Biological Applications
- Single-Phase, Antibacterial Trimagnesium Phosphate Hydrate Coatings on Polyetheretherketone (PEEK) Implants by Rapid Microwave Irradiation Technique
- (2018) Prabaha Sikder et al. ACS Biomaterials-Science & Engineering
- Single-Phase, Antibacterial Trimagnesium Phosphate Hydrate Coatings on Polyetheretherketone (PEEK) Implants by Rapid Microwave Irradiation Technique
- (2018) Prabaha Sikder et al. ACS Biomaterials Science & Engineering
- Controllable and durable release of BMP-2-loaded 3D porous sulfonated polyetheretherketone (PEEK) for osteogenic activity enhancement
- (2018) Zhenjie Sun et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- The use of cranial resection templates with 3D virtual planning and PEEK patient-specific implants: A 3 year follow-up
- (2018) S.E.C.M. van de Vijfeijken et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Mechanical performance of PEEK produced by additive manufacturing
- (2018) T.J. Hoskins et al. POLYMER TESTING
- Tribological and mechanical properties of graphene nanoplatelet/PEEK composites
- (2018) J.A. Puértolas et al. CARBON
- PEEK materials as an alternative to titanium in dental implants: A systematic review
- (2018) Sunil Mishra et al. Clinical Implant Dentistry and Related Research
- Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament
- (2018) Peng Geng et al. Journal of Manufacturing Processes
- Improved response of osteoprogenitor cells to titanium plasma-sprayed PEEK surfaces
- (2018) Daniel J. Hickey et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Influences of tantalum pentoxide and surface coarsening on surface roughness, hydrophilicity, surface energy, protein adsorption and cell responses to PEEK based biocomposite
- (2018) Shiqi Mei et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Strontium/adiponectin co-decoration modulates the osteogenic activity of nano-morphologic polyetheretherketone implant
- (2018) Shengnan Wang et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
- (2017) Chuncheng Yang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Structure and Function of Transfer Film Formed from PTFE/PEEK Polymer Blend
- (2017) Tasuku Onodera et al. Journal of Physical Chemistry C
- Thin magnesium layer confirmed as an antibacterial and biocompatible implant coating in a co-culture model
- (2017) Sarah Zaatreh et al. Molecular Medicine Reports
- Biodegradation of anti -microbial titanium-magnesium-silver coatings on polyetheretherketone for bone-contact applications
- (2017) Serap Gümüş et al. SURFACE & COATINGS TECHNOLOGY
- Strontium doped calcium phosphate coatings on poly(etheretherketone) (PEEK) by pulsed electron deposition
- (2017) Michele Bianchi et al. SURFACE & COATINGS TECHNOLOGY
- Assessment of a polyelectrolyte multilayer film coating loaded with BMP-2 on titanium and PEEK implants in the rabbit femoral condyle
- (2016) R. Guillot et al. Acta Biomaterialia
- Mechanical and biological behavior of biomedical PEEK matrix composites: A focused review
- (2016) Patricia R. Monich et al. MATERIALS LETTERS
- Hydroxyapatite coating on PEEK implants: Biomechanical and histological study in a rabbit model
- (2016) John W. Durham et al. Materials Science & Engineering C-Materials for Biological Applications
- Low-temperature air plasma modification of chitosan-coated PEEK biomaterials
- (2016) Agnieszka Ewa Wiącek et al. POLYMER TESTING
- Development of bioactive composite coatings based on combination of PEEK, bioactive glass and Ag nanoparticles with antibacterial properties
- (2016) Sigrid Seuss et al. SURFACE & COATINGS TECHNOLOGY
- Processability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)
- (2015) S. Berretta et al. EUROPEAN POLYMER JOURNAL
- Red selenium nanoparticles and gray selenium nanorods as antibacterial coatings for PEEK medical devices
- (2015) Qi Wang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Reinforcement of polyetheretherketone polymer with titanium for improved mechanical properties and in vitro biocompatibility
- (2015) Hyun-Do Jung et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Plasma-sprayed titanium coating to polyetheretherketone improves the bone-implant interface
- (2015) William R. Walsh et al. Spine Journal
- Powder characteristics, microstructure and properties of graphite platelet reinforced Poly Ether Ether Ketone composites in High Temperature Laser Sintering (HT-LS)
- (2015) Yuan Wang et al. MATERIALS & DESIGN
- Magnesium ion stimulation of bone marrow stromal cells enhances osteogenic activity, simulating the effect of magnesium alloy degradation
- (2014) Sayuri Yoshizawa et al. Acta Biomaterialia
- Current Strategies to Improve the Bioactivity of PEEK
- (2014) Rui Ma et al. INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
- Enhancement of CRF-PEEK osseointegration by plasma-sprayed hydroxyapatite: A rabbit model
- (2014) Felicia Suska et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Synthesis and 3D Printing of Biodegradable Polyurethane Elastomer by a Water-Based Process for Cartilage Tissue Engineering Applications
- (2014) Kun-Che Hung et al. Advanced Healthcare Materials
- Osteoconductive hydroxyapatite coated PEEK for spinal fusion surgery
- (2013) Byung-Dong Hahn et al. APPLIED SURFACE SCIENCE
- Creation of nanoporous TiO2surface onto polyetheretherketone for effective immobilization and delivery of bone morphogenetic protein
- (2013) Cheol-Min Han et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Mechanical and tribological properties of PEEK particle-filled UHMWPE composites: The role of counterface morphology change in dry sliding wear
- (2013) Yemei Liu et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Polyetheretherketone/magnesium composite selectively coated with hydroxyapatite for enhanced in vitro bio-corrosion resistance and biocompatibility
- (2013) Hyun-Do Jung et al. MATERIALS LETTERS
- PEEK composites reinforced with zirconia nanofiller
- (2012) T.K. Mishra et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Nano-TiO2/PEEK bioactive composite as a bone substitute material: in vitro and in vivo studies
- (2012) Feng Deng et al. International Journal of Nanomedicine
- Structure and mechanical performance of in situ synthesized hydroxyapatite/polyetheretherketone nanocomposite materials
- (2012) Rui Ma et al. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
- Titanium as a Reconstruction and Implant Material in Dentistry: Advantages and Pitfalls
- (2012) Mutlu Özcan et al. Materials
- Characterization of polyetheretherketone–hydroxyapatite nanocomposite materials
- (2011) Lin Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of surface modification of fly ash reinforced in polyetheretherketone composites
- (2011) M. Rahail Parvaiz et al. POLYMER COMPOSITES
- Mechanical and biological characteristics of diamond-like carbon coated poly aryl-ether-ether-ketone
- (2010) Huaiyu Wang et al. BIOMATERIALS
- The electron beam deposition of titanium on polyetheretherketone (PEEK) and the resulting enhanced biological properties
- (2010) Cheol-Min Han et al. BIOMATERIALS
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Mechanical properties and microstructure of polyetheretherketone–hydroxyapatite nanocomposite materials
- (2010) Lin Wang et al. MATERIALS LETTERS
- Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies
- (2010) Parina Patel et al. POLYMER DEGRADATION AND STABILITY
- Investigation of the thermal decomposition and flammability of PEEK and its carbon and glass-fibre composites
- (2010) Parina Patel et al. POLYMER DEGRADATION AND STABILITY
- Nanocellular foams-cell structure difference between immiscible and miscible PEEK/PEI polymer blends
- (2010) Tomoyuki Nemoto et al. POLYMER ENGINEERING AND SCIENCE
- Mechanical properties and in vitro response of strontium-containing hydroxyapatite/polyetheretherketone composites
- (2009) K.L. Wong et al. BIOMATERIALS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started