Effects of seawater on UHPC: Macro and microstructure properties

Corrosion behavior of carbon steel in chloride-contaminated ultra-high-performance cement pastes

(2022) Haibing Zheng et al.   CEMENT & CONCRETE COMPOSITES

Design and performance of low shrinkage UHPC for thin bonded bridge deck overlay

(2021) Le Teng et al.   CEMENT & CONCRETE COMPOSITES

Mechanisms underlying the strength enhancement of UHPC modified with nano-SiO2 and nano-CaCO3

(2021) Zemei Wu et al.   CEMENT & CONCRETE COMPOSITES

Effects of Seawater, NaCl, and Na2SO4 Solution Mixing on Hydration Process of Cement Paste

(2021) Weiwen Li et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Early-age and microstructural properties of glass powder blended cement paste: Improvement by seawater

(2021) Jian-Xin Lu et al.   CEMENT & CONCRETE COMPOSITES

Mechanisms on Accelerating Hydration of Alite Mixed with Inorganic Salts in Seawater and Characteristics of Hydration Products

(2021) Yanjie Sun et al.   ACS Sustainable Chemistry & Engineering

A review of recent advances in the science and technology of seawater-mixed concrete

(2021) Usama Ebead et al.   CEMENT AND CONCRETE RESEARCH

Rheological properties, compressive strength, hydration products and microstructure of seawater-mixed cement pastes

(2020) Junjie Wang et al.   CEMENT & CONCRETE COMPOSITES

Investigation on early-age hydration, mechanical properties and microstructure of seawater sea sand cement mortar

(2020) Peiran Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Preparation of sea water sea sand high performance concrete (SHPC) and serving performance study in marine environment

(2020) Tianyu Li et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete

(2020) Azzam Ahmed et al.   CONSTRUCTION AND BUILDING MATERIALS

A Comprehensive Review on Effects of Seawater on Engineering Properties of Concrete

(2020) Sajjad Ali Mangi et al.   Silicon

Influence of Seawater on the Morphological Evolution and the Microchemistry of Hydration Products of Tricalcium Silicates (C3S)

(2020) Sarah Abduljabbar Yaseen et al.   ACS Sustainable Chemistry & Engineering

Effect of fiber content on mechanical performance and cracking characteristics of ultra-high-performance seawater sea-sand concrete (UHP-SSC)

(2020) Bo-Tao Huang et al.   ADVANCES IN STRUCTURAL ENGINEERING

Flexural behavior of seawater sea-sand coral concrete–UHPC composite beams reinforced with BFRP bars

(2020) Zhiqiang Dong et al.   CONSTRUCTION AND BUILDING MATERIALS

Structural performance of FRP confined seawater concrete columns under chloride environment

(2019) Ao Zhou et al.   COMPOSITE STRUCTURES

Development and mechanical behaviour of ultra-high-performance seawater sea-sand concrete

(2019) Jin-Guang Teng et al.   ADVANCES IN STRUCTURAL ENGINEERING

Preliminary investigation of artificial reef concrete with sulphoaluminate cement, marine sand and sea water

(2019) Qing Xu et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of evaporation rate on pore size distribution, water loss, and early-age drying shrinkage of cement paste after the initial setting

(2019) Lifeng Zhang et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterizations of autogenous and drying shrinkage of ultra-high performance concrete (UHPC): An experimental study

(2018) T. Xie et al.   CEMENT & CONCRETE COMPOSITES

Abrasion resistance of ultra high performance concrete incorporating coarser aggregate

(2018) Sukhoon Pyo et al.   CONSTRUCTION AND BUILDING MATERIALS

The role of seawater in interaction of slag and silica fume with cement in low water-to-binder ratio pastes at the early age of hydration

(2018) Huang Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Fresh and hardened properties of seawater-mixed concrete

(2018) Adel Younis et al.   CONSTRUCTION AND BUILDING MATERIALS

Multiscale investigations on hydration mechanisms in seawater OPC paste

(2018) Junjie Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders

(2017) Wolfgang Kunther et al.   Journal of Materials Chemistry A

Monitoring hydration of UHPC and conventional paste by quantitative analysis on Raman patterns

(2016) Bashir Hasanzadeh et al.   CONSTRUCTION AND BUILDING MATERIALS

Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses

(2015) R. Yu et al.   CEMENT & CONCRETE COMPOSITES

Calcium silicate hydrates: Solid and liquid phase composition

(2015) Barbara Lothenbach et al.   CEMENT AND CONCRETE RESEARCH

Combined effect of metakaolin and sea water on performance and microstructures of concrete

(2015) Zhiguang Shi et al.   CONSTRUCTION AND BUILDING MATERIALS

Investigation on the effect of supplementary cementitious materials on the critical chloride threshold of steel in concrete

(2015) Federica Lollini et al.   MATERIALS AND STRUCTURES

Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concrete

(2014) Yue Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)

(2013) R. Yu et al.   CEMENT AND CONCRETE RESEARCH

The relationship between autogenous shrinkage and pore structure of cement paste with mineral admixtures

(2010) Yue Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of elevated temperatures on geopolymer paste, mortar and concrete

(2009) Daniel L.Y. Kong et al.   CEMENT AND CONCRETE RESEARCH

Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete

(2009) Thanongsak Nochaiya et al.   FUEL

Refinement of a Design-Oriented Stress–Strain Model for FRP-Confined Concrete

(2009) J. G. Teng et al.   JOURNAL OF COMPOSITES FOR CONSTRUCTION