Effect of TiN diffusion barrier layer on residual stress and carrier transport in flexible CZTSSe solar cells

Intermethod Comparison and Evaluation of Measured Near Surface Residual Stress in Milled Aluminum

(2021) C. R. Chighizola et al.   EXPERIMENTAL MECHANICS

Performance improvement of Cu2ZnSn(S,Se)4 solar cells by ultraviolet ozone treatment on precursor films

(2021) Jing Zhao et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

High efficiency CIGS solar cells on flexible stainless steel substrate with SiO2 diffusion barrier layer

(2021) Chen Zhang et al.   SOLAR ENERGY

Recent progress on all-inorganic metal halide perovskite solar cells

(2021) J. Liang et al.   Materials Today Nano

Solar cell efficiency tables (version 56)

(2020) Martin A. Green et al.   PROGRESS IN PHOTOVOLTAICS

CZTSSe solar cell with an efficiency of 10.19% based on absorbers with homogeneous composition and structure using a novel two-step annealing process

(2020) Guoan Ren et al.   SOLAR ENERGY

Surprising Efficiency Enhancement of Cu 2 ZnSn(S,Se) 4 Solar Cells with Abnormal Zn/Sn Ratios

(2020) Sijie Ge et al.   Solar RRL

Morphological control of Cu2ZnSn(S,Se)4 absorber films via inverted annealing for high-performance solar cells

(2020) Woo-Lim Jeong et al.   APPLIED SURFACE SCIENCE

Cu2ZnSn(S, Se)4 solar cell with slight band tailing states achieves 11.83% efficiency by selenizing sputtered Cu–Zn–Sn–S precursor

(2020) Guoan Ren et al.   JOURNAL OF POWER SOURCES

Ambient air-processed Cu2ZnSn(S,Se)4 solar cells with over 12% efficiency

(2020) Xiangyun Zhao et al.   Science Bulletin

Advanced Alkali Treatments for High‐Efficiency Cu(In,Ga)Se 2 Solar Cells on Flexible Substrates

(2019) Romain Carron et al.   Advanced Energy Materials

Void and secondary phase formation mechanisms of CZTSSe using Sn/Cu/Zn/Mo stacked elemental precursors

(2019) Se-Yun Kim et al.   Nano Energy

8% Efficiency Cu2ZnSn(S,Se)4 (CZTSSe) Thin Film Solar Cells on Flexible and Lightweight Molybdenum Foil Substrates

(2019) Eunae Jo et al.   ACS Applied Materials & Interfaces

Influence of Ge layer location on performance of flexible CZTSSe thin film solar cell

(2019) Luanhong Sun et al.   VACUUM

Flexible Cu2ZnSn(S,Se)4 solar cells with over 10% efficiency and methods of enlarging the cell area

(2019) Kee-Jeong Yang et al.   Nature Communications

Flexible CZTSSe thin film solar cells fabricated at low temperature with relieved residual stress by Sb incorporation

(2019) Luanhong Sun et al.   CERAMICS INTERNATIONAL

Flexible CIGS, CdTe and a-Si:H based thin film solar cells: A review

(2019) Jeyakumar Ramanujam et al.   PROGRESS IN MATERIALS SCIENCE

Cd-Free Cu(In,Ga)(Se,S)2 Thin-Film Solar Cell With Record Efficiency of 23.35%

(2019) Motoshi Nakamura et al.   IEEE Journal of Photovoltaics

Performance enhancement in Sb doped Cu(InGa)Se 2 thin film solar cell by e-beam evaporation

(2018) Jieyi Chen et al.   APPLIED SURFACE SCIENCE

Limiting effects of conduction band offset and defect states on high efficiency CZTSSe solar cell

(2018) SeongYeon Kim et al.   Nano Energy

High-Performance Flexible Perovskite Solar Cells on Ultrathin Glass: Implications of the TCO

(2017) Benjia Dou et al.   Journal of Physical Chemistry Letters

Investigation on Sb-doped induced Cu(InGa)Se 2 films grain growth by sputtering process with Se-free annealing

(2017) Leng Zhang et al.   SOLAR ENERGY

Characteristics of Cu 2 ZnSn(S x Se 1−x ) 4 thin-film solar cells prepared by sputtering deposition using single quaternary Cu 2 ZnSnS 4 target followed by selenization/sulfurization treatment

(2017) Yu-Pin Lin et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

What is the band alignment of Cu 2 ZnSn(S,Se) 4 solar cells?

(2017) Andrea Crovetto et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Efficiency enhancement of CIGS compound solar cell fabricated using homomorphic thin Cr 2 O 3 diffusion barrier formed on stainless steel substrate

(2016) Jae-Kwan Sim et al.   APPLIED SURFACE SCIENCE

Influence of laser repetition rate on the Cu 2 ZnSn(SSe) 4 thin films synthesized via pulsed laser deposition technique

(2016) Sharadrao A. Vanalakar et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

10% Efficiency Cu 2 ZnSn(S,Se) 4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width

(2016) Jianjun Li et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Enhanced solar cell performance of Cu 2 ZnSn(S,Se) 4 thin films through structural control by using multi-metallic stacked nanolayers and fast ramping process for sulfo-selenization

(2016) Wei-Chao Chen et al.   Nano Energy

Controlled formation of MoSe 2 by MoN x thin film as a diffusion barrier against Se during selenization annealing for CIGS solar cell

(2015) Chan-Wook Jeon et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Electrical insulation and breakdown properties of SiO2 and Al2O3 thin multilayer films deposited on stainless steel by physical vapor deposition

(2015) Josu Martinez-Perdiguero et al.   THIN SOLID FILMS

Inkjet-Printed Cu2ZnSn(S, Se)4Solar Cells

(2015) Xianzhong Lin et al.   Advanced Science

Ceramic Barrier Layers for Flexible Thin Film Solar Cells on Metallic Substrates: A Laboratory Scale Study for Process Optimization and Barrier Layer Properties

(2014) Jose-Maria Delgado-Sanchez et al.   ACS Applied Materials & Interfaces

Non-vacuum processed Cu2ZnSnS4 thin films: Influence of copper precursor on structural, optical and morphological properties

(2014) Ferhat Aslan et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Influence of iron on the performance of CIGS thin-film solar cells

(2014) R. Wuerz et al.   SOLAR ENERGY MATERIALS AND SOLAR CELLS

Investigation of Al2O3 diffusion barrier layer fabricated by atomic layer deposition for flexible Cu(In,Ga)Se2 solar cells

(2013) Dowon Bae et al.   RENEWABLE ENERGY

Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency

(2013) Wei Wang et al.   Advanced Energy Materials

Alternative sodium sources for Cu(In,Ga)Se2 thin-film solar cells on flexible substrates

(2011) R. Wuerz et al.   THIN SOLID FILMS