An Unusual Carbon–Ceramic Composite with Gradients in Composition and Porosity Delivering Outstanding Thermal Protection Performance up to 1900 °C

Fabrication of Large Aerogel-Like Carbon/Carbon Composites with Excellent Load-Bearing Capacity and Thermal-Insulating Performance at 1800 °C

(2022) Jian Li et al.   ACS Nano

A dense ZrB2-SiC-Si/SiC-Si coating to protect carbon/carbon composites against oxidation at 1773 K and 1973 K

(2021) Lei Zhou et al.   CORROSION SCIENCE

Measurement of Residual Stress in Silicon Carbide Fibers of Tubular Composites Using Raman Spectroscopy

(2021) James Nance et al.   ACTA MATERIALIA

High-temperature oxidation behavior of CVD-SiC ceramic coating in wet oxygen and structural evolution of oxidation product: Experiment and first-principle calculations

(2021) Pengfei Zhang et al.   APPLIED SURFACE SCIENCE

Ultralight carbon fiber felt reinforced monolithic carbon aerogel composites with excellent thermal insulation performance

(2021) Penglei Guo et al.   CARBON

Antioxidation enhancement and siliconization mitigation for SiC coated C/C composites via a nano-structural SiC porous layer

(2021) Tao Li et al.   CORROSION SCIENCE

MoSi2-HfC/TaC-HfC multi-phase coatings synthesized by supersonic atmospheric plasma spraying for C/C composites against ablation

(2021) Kang Shuai et al.   CORROSION SCIENCE

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

(2021) Manoj Naikade et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Construction of sandwich-structured C/C-SiC and C/C-SiC-ZrC composites with good mechanical and anti-ablation properties

(2021) Rida Zhao et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Microstructure and anti-ablation performance of HfC-TaC and HfC-ZrC coatings synthesized by CVD on C/C composites

(2020) Jincui Ren et al.   CERAMICS INTERNATIONAL

Synthesis of monolithic carbon aerogels with high mechanical strength via ambient pressure drying without solvent exchange

(2020) Zhi Yang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Understanding the ultra-high-temperature mechanical behaviors of advanced two-dimensional carbon-carbon composites

(2020) Tianbao Cheng   CERAMICS INTERNATIONAL

Long-life ablation resistance ZrB2-SiC-TiSi2 ceramic coating for SiC coated C/C composites under oxidizing environments up to 2200 K

(2020) Jinhua Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Three-dimensional nitrogen doped hierarchically porous carbon aerogels with ultrahigh specific surface area for high-performance supercapacitors and flexible micro-supercapacitors

(2020) Yunfang Gao et al.   CARBON

High-temperature resistant Y2SiO5–TiO2 aerogel composite for efficient thermal insulation

(2020) Rubing Zhang et al.   JOURNAL OF POROUS MATERIALS

The novel effect mechanism of Al2O3 nano-powder in the pack cementation process to prepare SiC coating on C/C composites

(2020) Jianjie Hao et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

An oxidation and ablation protective WSi2-HfB2-SiC coating for SiC coated C/C composites at 1973 K and above

(2020) Peipei Wang et al.   CORROSION SCIENCE

Mechanical strengths and thermal properties of titania-doped alumina aerogels and the application as high-temperature thermal insulator

(2019) Min Gao et al.   JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY

Ablation behavior of advanced TaSi 2 -based coating on carbon-bonded carbon fiber composite/ceramic insulation tile in plasma wind tunnel

(2018) Bin Du et al.   CERAMICS INTERNATIONAL

Microstructure and ablation mechanism of SiC-ZrC-Al 2 O 3 coating for SiC coated C/C composites under oxyacetylene torch test

(2018) Caixia Huo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

A novel Cr-doped Al 2 O 3 -SiC-ZrC composite coating for ablative protection of C/C-ZrC-SiC composites

(2018) Zheng Peng et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

An ultralight silica-modified ZrO 2 –SiO 2 aerogel composite with ultra-low thermal conductivity and enhanced mechanical strength

(2018) Xianbo Hou et al.   SCRIPTA MATERIALIA

Preparation of a high spectral emissivity TaSi 2 -based hybrid coating on SiOC-modified carbon-bonded carbon fiber composite by a flash sintering method

(2018) Bin Du et al.   SURFACE & COATINGS TECHNOLOGY

High-strength, thermal-stable ZrO2 aerogel from polyacetylacetonatozirconium

(2018) Benxue Liu et al.   CHEMICAL PHYSICS LETTERS

Measurement of interfacial residual stress in SiC fiber reinforced Ni-Cr-Al alloy composites by Raman spectroscopy

(2018) Xixi Niu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Quartz fiber reinforced Al2O3-SiO2 aerogel composite with highly thermal stability by ambient pressure drying

(2018) Huijun Yu et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

Enhanced mechanical and thermal properties of anisotropic fibrous porous mullite–zirconia composites produced using sol-gel impregnation

(2017) Rubing Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Bond stability and oxidation resistance of BSAS-based coating on C/SiC composites

(2017) Xizhi Fan et al.   SURFACE & COATINGS TECHNOLOGY

Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C

(2017) Yi Zeng et al.   Nature Communications

Sandwich-structured C/C-SiC composites fabricated by electromagnetic-coupling chemical vapor infiltration

(2017) Chenglong Hu et al.   Scientific Reports

Thermal insulation material based on SiO2 aerogel

(2016) Zhao-hui Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Ultra-low thermal conductivity and high strength of aerogels/fibrous ceramic composites

(2016) Jian He et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Experimental study of high-temperature tensile mechanical properties of 3D needled C/C–SiC composites

(2016) Zhen Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Advanced structural ceramics in aerospace propulsion

(2016) Nitin P. Padture   NATURE MATERIALS

Raman microspectroscopy characterization of carbon blacks: Spectral analysis and structural information

(2015) Miroslawa Pawlyta et al.   CARBON

Pyrolysis of Phenolic Impregnated Carbon Ablator (PICA)

(2014) Brody K. Bessire et al.   ACS Applied Materials & Interfaces

Fabrication and properties of lightweight ZrB2 and SiC-modified carbon bonded carbon fiber composites via polymeric precursor infiltration and pyrolysis

(2014) Baosheng Xu et al.   RSC Advances

Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique

(2013) Chen Liu et al.   CARBON

Ablation and mechanical behavior of a sandwich-structured composite with an inner layer of Cf/SiC between two outer layers of Cf/SiC–ZrB2–ZrC

(2013) Chenglong Hu et al.   CORROSION SCIENCE

Increasing the strength and toughness of a carbon fiber/silicon carbide composite by heat treatment

(2012) Hui Mei et al.   CARBON

Effect of reaction melt infiltration temperature on the ablation properties of 2D C/C–SiC–ZrC composites

(2012) Zhaoqian Li et al.   CORROSION SCIENCE

Advances in Tailoring Resorcinol-Formaldehyde Organic and Carbon Gels

(2011) Ahmed M. ElKhatat et al.   ADVANCED MATERIALS

Novel phenolic impregnated 3-D Fine-woven pierced carbon fabric composites: Microstructure and ablation behavior

(2011) Changqing Hong et al.   COMPOSITES PART B-ENGINEERING

Erratum on "Performance of a Low Density Ablative Heat Shield Material"

(2008) M. A. Covington et al.   JOURNAL OF SPACECRAFT AND ROCKETS