Complex geometry and integrated macro-porosity: Clinical applications of electron beam melting to fabricate bespoke bone-anchored implants

Three‐dimensional‐printed customized prosthesis for pubic defect: clinical outcomes in 5 cases at a mean follow‐up of 24 months

(2021) Yuqi Zhang et al.   BMC MUSCULOSKELETAL DISORDERS

Minimum 7‐year Follow‐up of A Porous Coated Trabecular Titanium Cup Manufactured with Electron Beam Melting Technique in Primary Total Hip Arthroplasty

(2021) Yong Huang et al.   Orthopaedic Surgery

Highly Cancellous Titanium Alloy (TiAl6V4) Surfaces on Three-Dimensionally Printed, Custom-Made Intercalary Tibia Prostheses: Promising Short- to Intermediate-Term Results

(2021) Wiebke K. Guder et al.   Journal of Personalized Medicine

A personalized 3D-printed plate for tibiotalocalcaneal arthrodesis: Design, fabrication, biomechanical evaluation and postoperative assessment

(2021) Yan Yao et al.   COMPUTERS IN BIOLOGY AND MEDICINE

Electron beam melting of Ti-6Al-4V lattice structures: correlation between post heat treatment and mechanical properties

(2021) Giuseppe Del Guercio et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Osseointegration of retrieved 3D-printed, off-the-shelf acetabular implants

(2021) Lorenzo Dall’Ava et al.   Bone & Joint Research

3D-Printed Titanium Custom-Made Prostheses in Reconstruction after Pelvic Tumor Resection: Indications and Results in a Series of 14 Patients at 42 Months of Average Follow-Up

(2021) Carmine Zoccali et al.   Journal of Clinical Medicine

Short-term findings of a custom-made 3D-printed titanium partial scaphoid prosthesis and scapholunate interosseous ligament reconstruction

(2021) Mario Igor Rossello   BMJ Case Reports

Multiscale modeling of bone tissue mechanobiology

(2021) José Manuel García-Aznar et al.   BONE

Morphological symmetry of the radius and ulna—Can contralateral forearm bones utilize as a reliable template for the opposite side?

(2021) Eunah Hong et al.   PLoS One

Mineral tessellation in bone and the stenciling principle for extracellular matrix mineralization

(2021) Marc D. McKee et al.   JOURNAL OF STRUCTURAL BIOLOGY

Three‐dimensional‐printed intercalary prosthesis for the reconstruction of large bone defect after joint‐preserving tumor resection

(2020) Weijian Liu et al.   JOURNAL OF SURGICAL ONCOLOGY

New 3-dimensional implant application as an alternative to allograft in limb salvage surgery: a technical note on 10 cases

(2020) Jong Woong Park et al.   Acta Orthopaedica

Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing

(2020) M. Kahlin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Analysis of principles inspiring design of three-dimensional-printed custom-made prostheses in two referral centres

(2020) Andrea Angelini et al.   INTERNATIONAL ORTHOPAEDICS

3D-Printed Modular Hemipelvic Endoprosthetic Reconstruction Following Periacetabular Tumor Resection

(2020) Tao Ji et al.   JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME

Can Custom 3D Printed Implants Successfully Reconstruct Massive Acetabular Defects? a 3D‐CT Assessment

(2020) Matthieu Durand‐Hill et al.   JOURNAL OF ORTHOPAEDIC RESEARCH

Characterization of dimensional, morphological and morphometric features of retrieved 3D-printed acetabular cups for hip arthroplasty

(2020) Lorenzo Dall’Ava et al.   Journal of Orthopaedic Surgery and Research

Upper cervical spine reconstruction using customized 3D-printed vertebral body in 9 patients with primary tumors involving C2

(2020) Feng Wei et al.   Annals of Translational Medicine

Clinical study of outcomes after revision surgery using porous titanium custom-made implants for severe acetabular septic bone defects

(2020) Giorgio Burastero et al.   INTERNATIONAL ORTHOPAEDICS

Additive manufacturing of in-situ reinforced Ti–35Nb–5Ta–7Zr (TNTZ) alloy by selective electron beam melting (SEBM)

(2020) Kun Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Patient-specific alloplastic endoprosthesis for reconstruction of the mandible following segmental resection: A case series

(2020) Mohamed Mounir et al.   JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY

An innovative strategy to treat large metaphyseal segmental femoral bone defect using customized design and 3D printed micro-porous prosthesis: a prospective clinical study

(2020) Guojin Hou et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Novel exploration of 3D printed personalized total elbow arthroplasty to solve the severe bone defect after internal fixation failure of comminuted distal humerus fracture

(2020) Naichao Wu et al.   MEDICINE

Hallmarks in the History and Development of Total Hip Arthroplasty

(2020) Konstantinos Markatos et al.   Surgical Innovation

Three-dimensional-printed customized prosthesis for pubic defect: prosthesis design and surgical techniques

(2020) Yuqi Zhang et al.   Journal of Orthopaedic Surgery and Research

Effects of altered hot isostatic pressing treatments on the microstructures and mechanical performance of electron beam melted Ti-6Al-4V

(2020) Ahmad Abu-Issa et al.   Journal of Materials Research and Technology-JMR&T

3D Printed Total Talus Replacement for Avascular Necrosis of the Talus

(2020) Rishin J. Kadakia et al.   FOOT & ANKLE INTERNATIONAL

Treatment of Osteosarcoma of the Talus with a 3D-Printed Talar Prosthesis

(2020) Jihui Huang et al.   Journal of Foot & Ankle Surgery

Metallic 3D Printed Total Talus Replacement: A Case Study

(2020) Raafae M Hussain   Journal of Foot & Ankle Surgery

Novel 3D printed integral customized acetabular prosthesis for anatomical rotation center restoration in hip arthroplasty for developmental dysplasia of the hip crowe type III

(2020) Heng Zhang et al.   MEDICINE

A new 3D printing porous trabecular titanium metal acetabular cup for primary total hip arthroplasty: a minimum 2-year follow-up of 92 consecutive patients

(2020) Xiao Geng et al.   Journal of Orthopaedic Surgery and Research

Reconstruction of Bony Defects after Tumor Resection with 3D-Printed Anatomically Conforming Pelvic Prostheses through a Novel Treatment Strategy

(2020) Wei Peng et al.   Biomed Research International

A hollow, custom-made prosthesis combined with a vascularized flap and bone graft for skeletal reconstruction after bone tumour resection

(2020) Giovanni Beltrami et al.   SURGICAL ONCOLOGY-OXFORD

A three-dimensional printed porous implant combined with bone grafting following curettage of a subchondral giant cell tumour of the proximal tibia: a case report

(2019) Minxun Lu et al.   BMC Surgery

How long does a hip replacement last? A systematic review and meta-analysis of case series and national registry reports with more than 15 years of follow-up

(2019) Jonathan T Evans et al.   LANCET

Customized skull base–temporomandibular joint combined prosthesis with 3D-printing fabrication for craniomaxillofacial reconstruction: a preliminary study

(2019) J.S. Zheng et al.   INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY

Additive manufacturing of NiTi shape memory alloys using pre-mixed powders

(2019) C. Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Individual resection and reconstruction of pelvic tumor with three-dimensional printed customized hemi-pelvic prosthesis

(2019) Qing Han et al.   MEDICINE

Three-dimensional-printed custom-made hemipelvic endoprosthesis for primary malignancies involving acetabulum: the design solution and surgical techniques

(2019) Jie Wang et al.   Journal of Orthopaedic Surgery and Research

Towards multi-dynamic mechano-biological optimization of 3D-printed scaffolds to foster bone regeneration

(2019) Camille Metz et al.   Acta Biomaterialia

The Personalized Shoulder Reconstruction Assisted by 3D Printing Technology After Resection of the Proximal Humerus Tumours

(2019) Hongzhi Hu et al.   Cancer Management and Research

Immediate mandibular reconstruction via patient-specific titanium mesh tray using electron beam melting/CAD/rapid prototyping techniques: One-year follow-up

(2018) Mohamed Farid Shehab et al.   International Journal of Medical Robotics and Computer Assisted Surgery

Osseointegration of 3D printed microalloyed CoCr implants-Addition of 0.04% Zr to CoCr does not alter bone material properties

(2018) Furqan A. Shah et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

A new 3D printed titanium metal trabecular bone reconstruction system for early osteonecrosis of the femoral head

(2018) Ying Zhang et al.   MEDICINE

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Uncemented three-dimensional-printed prosthetic reconstruction for massive bone defects of the proximal tibia

(2018) Minxun Lu et al.   World Journal of Surgical Oncology

Custom-Made Titanium 3-Dimensional Printed Interbody Cages for Treatment of Osteoporotic Fracture–Related Spinal Deformity

(2018) Timothy L. Siu et al.   World Neurosurgery

Biomimetic 3D-printed custom-made prosthesis for anterior column reconstruction in the thoracolumbar spine: a tailored option following en bloc resection for spinal tumors

(2018) Marco Girolami et al.   EUROPEAN SPINE JOURNAL

X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications

(2018) Anton du Plessis et al.   3D Printing and Additive Manufacturing

Osseointegration and current interpretations of the bone-implant interface

(2018) Furqan A. Shah et al.   Acta Biomaterialia

Three-dimension-printed custom-made prosthetic reconstructions: from revision surgery to oncologic reconstructions

(2018) Andrea Angelini et al.   INTERNATIONAL ORTHOPAEDICS

Selective electron beam melting of NiTi: Microstructure, phase transformation and mechanical properties

(2018) Quan Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Novel exploration of customized 3D printed shoulder prosthesis in revision of total shoulder arthroplasty

(2018) Yun Zou et al.   MEDICINE

Fatigue behaviour of additive manufactured Ti6Al4V, with as-built surfaces, exposed to variable amplitude loading

(2017) M. Kahlin et al.   INTERNATIONAL JOURNAL OF FATIGUE

The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report

(2017) Ralph J. Mobbs et al.   JOURNAL OF NEUROSURGERY-SPINE

Open-cellular metal implant design and fabrication for biomechanical compatibility with bone using electron beam melting

(2017) L.E. Murr   Journal of the Mechanical Behavior of Biomedical Materials

Effects of post-processing on cyclic fatigue response of a titanium alloy additively manufactured by electron beam melting

(2017) Xiaoli Shui et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Surgical Treatment of Primary Osteosarcoma of the Sacrum

(2017) Yifei Wang et al.   SPINE

Multilevel 3D Printing Implant for Reconstructing Cervical Spine With Metastatic Papillary Thyroid Carcinoma

(2017) Xiucan Li et al.   SPINE

Cobalt toxicity in humans—A review of the potential sources and systemic health effects

(2017) Laura Leyssens et al.   TOXICOLOGY

Sacral Reconstruction with a 3D-Printed Implant after Hemisacrectomy in a Patient with Sacral Osteosarcoma: 1-Year Follow-Up Result

(2017) Doyoung Kim et al.   YONSEI MEDICAL JOURNAL

Reconstruction with 3D-printed pelvic endoprostheses after resection of a pelvic tumour

(2017) H. Liang et al.   Bone & Joint Journal

Customized Knee Prosthesis in Treatment of Giant Cell Tumors of the Proximal Tibia: Application of 3-Dimensional Printing Technology in Surgical Design

(2017) Wenbin Luo et al.   MEDICAL SCIENCE MONITOR

Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing

(2017) C. J. Smith et al.   Scientific Reports

3D printed Ti6Al4V implant surface promotes bone maturation and retains a higher density of less aged osteocytes at the bone-implant interface

(2016) Furqan A. Shah et al.   Acta Biomaterialia

Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting

(2016) Furqan A. Shah et al.   Acta Biomaterialia

Polyether ether ketone implants achieve increased bone fusion when coated with nano-sized hydroxyapatite: a histomorphometric study in rabbit bone

(2016) Pär Johansson et al.   International Journal of Nanomedicine

Osseointegration of nanohydroxyapatite- or nano-calcium silicate-incorporated polyetheretherketone bioactive composites in vivo

(2016) Rui Ma et al.   International Journal of Nanomedicine

Additive manufacturing of metallic components by selective electron beam melting — a review

(2016) C. Körner   INTERNATIONAL MATERIALS REVIEWS

Clinical, Morphological, and Molecular Evaluations of Bone Regeneration With an Additive Manufactured Osteosynthesis Plate

(2016) Andreas Thor et al.   JOURNAL OF CRANIOFACIAL SURGERY

Cranioplasty Enhanced by Three-Dimensional Printing

(2016) Eun-Kyung Park et al.   JOURNAL OF CRANIOFACIAL SURGERY

Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report

(2016) Felicia Suska et al.   JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY

Simultaneous Bimaxillary Surgery and Mandibular Reconstruction With a 3-Dimensional Printed Titanium Implant Fabricated by Electron Beam Melting: A Preliminary Mechanical Testing of the Printed Mandible

(2016) Ui-Lyong Lee et al.   JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY

Commercially pure titanium (cp-Ti) versus titanium alloy (Ti6Al4V) materials as bone anchored implants — Is one truly better than the other?

(2016) Furqan A. Shah et al.   Materials Science & Engineering C-Materials for Biological Applications

The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting

(2016) Samuel Tammas-Williams et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Reconstruction of the Upper Cervical Spine Using a Personalized 3D-Printed Vertebral Body in an Adolescent With Ewing Sarcoma

(2016) Nanfang Xu et al.   SPINE

Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting

(2016) Xiaoli Zhao et al.   MATERIALS & DESIGN

Trabecular plates and rods determine elastic modulus and yield strength of human trabecular bone

(2015) Ji Wang et al.   BONE

Tridimensional titanium-printed custom-made prosthesis for sternocostal reconstruction

(2015) José L. Aranda et al.   EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY

Characterization and Control of Powder Properties for Additive Manufacturing

(2015) A. Strondl et al.   JOM

Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature

(2015) Hongbin Fan et al.   World Journal of Surgical Oncology

Titanium-Nitride Coating of Orthopaedic Implants: A Review of the Literature

(2015) Ruud P. van Hove et al.   Biomed Research International

Dose-dependent effect of radiation on titanium implants: a quantitative study in rabbits

(2013) Jun Yuan Li et al.   CLINICAL ORAL IMPLANTS RESEARCH

Osseointegration of Implants in Irradiated Bone With and Without Hyperbaric Oxygen Treatment: An Experimental Study in Rat Tibiae

(2013) Jan Nyberg et al.   INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS

Dental Implants Installed in Irradiated Jaws

(2013) L. Chambrone et al.   JOURNAL OF DENTAL RESEARCH

Mechanical Signaling for Bone Modeling and Remodeling

(2012) Alexander G. Robling et al.   CRITICAL REVIEWS IN EUKARYOTIC GENE EXPRESSION

Influence of Electron Beam Melting Manufactured Implants on Ingrowth and Shear Strength in an Ovine Model

(2012) Nicky Bertollo et al.   JOURNAL OF ARTHROPLASTY

Bone ingrowth potential of electron beam and selective laser melting produced trabecular-like implant surfaces with and without a biomimetic coating

(2012) J. E. Biemond et al.   JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE

Acute fractures of the scaphoid bone: Systematic review and meta-analysis

(2012) S. Alshryda et al.   SURGEON-JOURNAL OF THE ROYAL COLLEGES OF SURGEONS OF EDINBURGH AND IRELAND

Free-Form-Fabricated Commercially Pure Ti and Ti6Al4V Porous Scaffolds Support the Growth of Human Embryonic Stem Cell-Derived Mesodermal Progenitors

(2012) G. M. de Peppo et al.   TheScientificWorldJOURNAL

Metallic additive manufacturing: state-of-the-art review and prospects

(2012) Benjamin Vayre et al.   Mechanics & Industry

The Classic: Report on the Positive Results Obtained by the Modern Surgical Experiment Regarding the Suture and Replacement of Defects of Superior Tissue, as well as the Utilization of Re-absorbable and Living Tamponade in Surgery

(2011) Themistocles Gluck   CLINICAL ORTHOPAEDICS AND RELATED RESEARCH

Long-term biocompatibility and osseointegration of electron beam melted, free-form–fabricated solid and porous titanium alloy: Experimental studies in sheep

(2011) A Palmquist et al.   JOURNAL OF BIOMATERIALS APPLICATIONS

Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee replacement implants fabricated by electron beam melting

(2011) L.E. Murr et al.   Journal of the Mechanical Behavior of Biomedical Materials

Intracortical remodelling and porosity in the distal radius and post-mortem femurs of women: a cross-sectional study

(2010) Roger MD Zebaze et al.   LANCET

Radiation effects on bone healing and reconstruction: interpretation of the literature

(2010) Franck Jegoux et al.   ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTICS

In vivoperformance of selective electron beam-melted Ti-6Al-4V structures

(2009) Sabine Ponader et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Biofabrication: a 21st century manufacturing paradigm

(2009) V Mironov et al.   Biofabrication

Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting

(2008) Peter Heinl et al.   Acta Biomaterialia

Electron beam-melted, free-form-fabricated titanium alloy implants: Material surface characterization and early bone response in rabbits

(2008) Peter Thomsen et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Effects of radiation therapy on craniofacial and dental implants: a review of the literature

(2008) Stefan Ihde et al.   ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY AND ENDODONTICS