Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review
Authors
Keywords
-
Journal
Wood Material Science & Engineering
Volume -, Issue -, Pages 1-20
Publisher
Informa UK Limited
Online
2022-04-08
DOI
10.1080/17480272.2022.2056080
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels
- (2021) Pavlo Bekhta et al. European Journal of Wood and Wood Products
- Eco-Friendly, High-Density Fiberboards Bonded with Urea-Formaldehyde and Ammonium Lignosulfonate
- (2021) Petar Antov et al. Polymers
- Low-formaldehyde emission composite particleboard manufactured from waste chestnut bur
- (2021) Jiayin Liang et al. JOURNAL OF WOOD SCIENCE
- Synthesis and characterization of resol type phenol-formaldehyde resin improved by SiO2-Np
- (2021) GÜNAY ÖZBAY et al. WOOD RESEARCH
- Utilization of Birch Bark as an Eco-Friendly Filler in Urea-Formaldehyde Adhesives for Plywood Manufacturing
- (2021) Roman Réh et al. Polymers
- Eco-Friendly Fiberboard Panels from Recycled Fibers Bonded with Calcium Lignosulfonate
- (2021) Petar Antov et al. Polymers
- Influence of agricultural fibers size on mechanical and insulating properties of innovative chitosan-based insulators
- (2021) Yasmina Khalaf et al. CONSTRUCTION AND BUILDING MATERIALS
- Properties of Eco-Friendly Particleboards Bonded with Lignosulfonate-Urea-Formaldehyde Adhesives and pMDI as a Crosslinker
- (2021) Pavlo Bekhta et al. Materials
- Properties of High-Density Fiberboard Bonded with Urea–Formaldehyde Resin and Ammonium Lignosulfonate as a Bio-Based Additive
- (2021) Petar Antov et al. Polymers
- Volatile Organic Compounds (VOCs) Emitted from Coated Furniture Units
- (2021) Ozge Cemiloglu Ulker et al. Coatings
- Analysis of Larch-Bark Capacity for Formaldehyde Removal in Wood Adhesives
- (2020) Eugenia Mariana Tudor et al. International Journal of Environmental Research and Public Health
- Effect of Veneer-Drying Temperature on Selected Properties and Formaldehyde Emission of Birch Plywood
- (2020) Pavlo Bekhta et al. Polymers
- Enhancing the performance of low molar ratio urea–formaldehyde resin adhesives via in-situ modification with intercalated nanoclay
- (2020) Muhammad Adly Rahandi Lubis et al. JOURNAL OF ADHESION
- Wood Composites and Their Polymer Binders
- (2020) Antonio Pizzi et al. Polymers
- Hydrogen-Bond-Induced Crystallization in Low-Molar-Ratio Urea–Formaldehyde Resins during Synthesis
- (2020) Eko Setio Wibowo et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Microencapsulation of polymeric isocyanate for the modification of urea-formaldehyde resins
- (2020) Muhammad Adly Rahandi Lubis et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Formaldehyde Emission in Micron-Sized Wollastonite-Treated Plywood Bonded with Soy Flour and Urea-Formaldehyde Resin
- (2020) Hamid R. Taghiyari et al. Applied Sciences-Basel
- Structural Application of Eco-Friendly Composites from Recycled Wood Fibres Bonded with Magnesium Lignosulfonate
- (2020) Petar Antov et al. Applied Sciences-Basel
- Impact of the Synthesis Procedure on Urea-Formaldehyde Resins Prepared by Alkaline–Acid Process
- (2019) Carolina Gonçalves et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Lignocellulosic waste fibers and their application as a component of urea-formaldehyde adhesive composition in the manufacture of plywood
- (2019) Pavlo Bekhta et al. European Journal of Wood and Wood Products
- Influence of synthesis method and melamine content of urea-melamine-formaldehyde resins to their features in cohesion, interphase, and adhesion performance
- (2019) Bora Jeong et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Functionality of Beech Bark in Adhesive Mixtures Used in Plywood and Its Effect on the Stability Associated with Material Systems
- (2019) Roman Réh et al. Materials
- Alumina nanoparticles as formaldehyde scavenger for urea-formaldehyde resin: Rheological and in-situ cure performance
- (2019) Pedro Henrique Gonzalez de Cademartori et al. COMPOSITES PART B-ENGINEERING
- Ammonium Lignosulfonate Adhesives for Particleboards with pMDI and Furfuryl Alcohol as Crosslinkers
- (2019) Venla Hemmilä et al. Polymers
- Exploring the formaldehyde reactivity of tannins with different molecular weight distributions: bayberry tannins and larch tannins
- (2019) Tao Yang et al. HOLZFORSCHUNG
- Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger
- (2018) Aizat Ghani et al. BUILDING AND ENVIRONMENT
- Removal of formaldehyde on carbon -based materials: A review of the recent approaches and findings
- (2018) S. Suresh et al. CARBON
- Reducing formaldehyde emission from wood-based panels by modification of UF and MUF resins with condensates obtained from kiln-drying of wood
- (2018) Nadir Ayrilmis et al. HOLZFORSCHUNG
- Analysis of the hydrolysates from cured and uncured urea-formaldehyde (UF) resins with two F/U mole ratios
- (2018) Muhammad Adly Rahandi Lubis et al. HOLZFORSCHUNG
- Utilization and characterization of amino resins for the production of wood-based panels with emphasis on particleboards (PB) and medium density fibreboards (MDF). A review
- (2018) Carolina Gonçalves et al. HOLZFORSCHUNG
- “Greener” adhesives composed of urea-formaldehyde resin and cottonseed meal for wood-based composites
- (2018) Ming Liu et al. JOURNAL OF CLEANER PRODUCTION
- Characterization of the Low Molar Ratio Urea–Formaldehyde Resin with 13C NMR and ESI–MS: Negative Effects of the Post-Added Urea on the Urea–Formaldehyde Polymers
- (2018) Hui Wang et al. Polymers
- Reduction of formaldehyde emission from medium density fiberboard by chitosan as scavenger
- (2018) Hedi Hassannejad et al. The Journal of Adhesion
- Revealing the impacts of recycled urea–formaldehyde wastes on the physical–mechanical properties of MDF
- (2018) Mohesn Khonakdar Dazmiri et al. European Journal of Wood and Wood Products
- Comparison of the properties of urea-formaldehyde resins by the use of formalin or urea formaldehyde condensates
- (2018) Ali Dorieh et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Formaldehyde sources, formaldehyde concentrations and air exchange rates in European housings
- (2018) Tunga Salthammer BUILDING AND ENVIRONMENT
- Effect of short-term thermomechanical densification of wood veneers on the properties of birch plywood
- (2017) Pavlo Bekhta et al. European Journal of Wood and Wood Products
- Urea-formaldehyde resin structure formation under alkaline condition: a quantitative 13C-NMR study
- (2017) Jiankun Liang et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Reduction of the formaldehyde content in leathers treated with formaldehyde resins by means of plant polyphenols
- (2017) Agustí Marsal et al. JOURNAL OF CLEANER PRODUCTION
- Hydrolytic Removal of Cured Urea–Formaldehyde Resins in Medium-Density Fiberboard for Recycling
- (2017) Muhammad Adly Rahandi Lubis et al. JOURNAL OF WOOD CHEMISTRY AND TECHNOLOGY
- Regulation of sorption processes in natural nanoporous aluminosilicates. 3. Impact of electromagnetic fields on adsorption and desorption of formaldehyde by clinoptilolite
- (2017) L. I. Bel’chinskaya et al. Protection of Metals and Physical Chemistry of Surfaces
- Physical and mechanical properties of particleboards manufactured using charcoal as additives
- (2017) G Kowaluk et al. iForest-Biogeosciences and Forestry
- Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose
- (2016) Nadir Ayrilmis et al. BUILDING AND ENVIRONMENT
- Utilization of bark flours as additive in plywood manufacturing
- (2016) Ismail Aydin et al. European Journal of Wood and Wood Products
- Optimization of processing parameters of medium density fiberboard using response surface methodology for multiwalled carbon nanotubes as a nanofiller
- (2016) Anuj Kumar et al. European Journal of Wood and Wood Products
- Urea–formaldehyde resin prepared with concentrated formaldehyde
- (2016) Zhigang Wu et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Reduction of formaldehyde emission from plywood using composite resin composed of resorcinol–formaldehyde and urea-modified scallop shell nanoparticles
- (2016) Shinya Yamanaka et al. WOOD SCIENCE AND TECHNOLOGY
- Effect of addition of microfibrillated cellulose to urea-formaldehyde on selected adhesive characteristics and distribution in particle board
- (2015) Eike Mahrdt et al. CELLULOSE
- Fumed silica as a filler for MUPF resin in the process of manufacturing water-resistant plywood
- (2015) Dorota Dukarska et al. European Journal of Wood and Wood Products
- Addition of ammonium hydroxide as formaldehyde scavenger for sesenduk (Endospermum diadenum) wood compregnated using phenolic resins
- (2015) Zaidon Ashaari et al. European Journal of Wood and Wood Products
- Introduction to Special Issue: Wood Adhesives: Past, Present, and Future
- (2015) Charles R. Frihart FOREST PRODUCTS JOURNAL
- Micro-Morphological Features of Cured Urea-Formaldehyde Adhesives Detected by Transmission Electron Microscopy
- (2015) Arif Nuryawan et al. JOURNAL OF ADHESION
- Reduction of Formaldehyde Emission from Particleboard by Phenolated Kraft Lignin
- (2015) Hamed Younesi-Kordkheili et al. JOURNAL OF ADHESION
- The microcapsule-type formaldehyde scavenger: The preparation and the application in urea-formaldehyde adhesives
- (2015) Hongyun Duan et al. JOURNAL OF HAZARDOUS MATERIALS
- Investigation of the reaction of 1,3-dimethylurea with formaldehyde by quantitative on-line NMR spectroscopy: a model for the urea-formaldehyde system
- (2015) Oliver Steinhof et al. MAGNETIC RESONANCE IN CHEMISTRY
- Effects of Ammonium Carbonate Post Treatment on Phenolic Resin Treated Sesenduk (Endospermum diadenum) Wood
- (2015) Zaidon Ashaari et al. Sains Malaysiana
- WATER-RESISTANT WHEY PROTEIN BASED WOOD ADHESIVE MODIFIED BY POST-TREATED PHENOL-FORMALDEHYDE OLIGOMERS (PFO)
- (2014) Wenbo Wang et al. BioResources
- Developing Environmentally Friendly Wood Composite Panels by Nanotechnology
- (2014) Zeki Candan et al. BioResources
- Improving urea formaldehyde resin properties by glyoxalated soda bagasse lignin
- (2014) Hamed Younesi-Kordkheili et al. European Journal of Wood and Wood Products
- Scalable and template-free production of mesoporous calcium carbonate and its potential to formaldehyde adsorbent
- (2014) Shinya Yamanaka et al. JOURNAL OF NANOPARTICLE RESEARCH
- Quantitative and qualitative1H, 13C, and15N NMR spectroscopic investigation of the urea-formaldehyde resin synthesis
- (2014) Oliver Steinhof et al. MAGNETIC RESONANCE IN CHEMISTRY
- Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressing
- (2013) Anuj Kumar et al. European Journal of Wood and Wood Products
- The influence of scavengers on VOC emissions in particleboards made from pine and poplar
- (2013) N. A. Costa et al. European Journal of Wood and Wood Products
- Potential of pulp and paper secondary sludge as co-adhesive and formaldehyde scavenger for particleboard manufacturing
- (2013) Suying Xing et al. European Journal of Wood and Wood Products
- Influence of activated charcoal as filler on the properties of wood composites
- (2013) Anuj Kumar et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Production of scallop shell nanoparticles by mechanical grinding as a formaldehyde adsorbent
- (2013) Shinya Yamanaka et al. JOURNAL OF NANOPARTICLE RESEARCH
- Effects of hardener type, urea usage and conditioning period on the quality properties of particleboard
- (2013) İlkay Atar et al. MATERIALS & DESIGN
- Scavengers for achieving zero formaldehyde emission of wood-based panels
- (2013) Nuno A. Costa et al. WOOD SCIENCE AND TECHNOLOGY
- Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard
- (2012) Hamidreza Pirayesh et al. COMPOSITES PART B-ENGINEERING
- Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour–urea formaldehyde adhesive
- (2012) Amine Moubarik et al. COMPOSITES PART B-ENGINEERING
- Preparation and characterisation of bioplastics made from cottonseed protein
- (2012) H.-B. Yue et al. GREEN CHEMISTRY
- Improving some of applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunie) wood employing nano-SiO2
- (2012) Ayoub Salari et al. INDUSTRIAL CROPS AND PRODUCTS
- Exposure study to examine chemosensory effects of formaldehyde on hyposensitive and hypersensitive males
- (2012) Joerg U. Mueller et al. INTERNATIONAL ARCHIVES OF OCCUPATIONAL AND ENVIRONMENTAL HEALTH
- Reduction of formaldehyde emission from plywood
- (2012) Marzieh Gangi et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Effect of nanoclay on some applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunei) wood
- (2012) Ayoub Salari et al. JOURNAL OF WOOD SCIENCE
- Melamine formaldehyde: curing studies and reaction mechanism
- (2012) Dyana J Merline et al. POLYMER JOURNAL
- The efficiency of tannin as a formaldehyde scavenger chemical in medium density fiberboard
- (2011) Sevda Boran et al. COMPOSITES PART B-ENGINEERING
- The reduction of indoor air formaldehyde from wood based composites using urea treatment for building materials
- (2011) H. Hematabadi et al. CONSTRUCTION AND BUILDING MATERIALS
- On the responsiveness of hardened UF-resins of different molar ratio towards ammonia fumigation
- (2011) E. Roffael European Journal of Wood and Wood Products
- Potential of pulp and paper sludge as a formaldehyde scavenger agent in MDF resins
- (2011) Sébastien Migneault et al. HOLZFORSCHUNG
- Reduction of formaldehyde emission from light MDF panels by adding chestnut shell flour
- (2011) Nadir Ayrilmis et al. HOLZFORSCHUNG
- Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin
- (2011) S. Boran et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Hydrolytic stability and crystallinity of cured urea–formaldehyde resin adhesives with different formaldehyde/urea mole ratios
- (2011) Byung-Dae Park et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Alternative to latent catalysts for curing UF resins used in the production of low formaldehyde emission wood-based panels
- (2011) Nuno Costa et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Soy protein adhesives improved by SiO2 nanoparticles for plywoods
- (2011) Hua‐Neng Xu et al. Pigment & Resin Technology
- Synthesis, characterization and thermal analysis of urea–formaldehyde/nanoSiO2 resins
- (2011) E. Roumeli et al. THERMOCHIMICA ACTA
- Characterization of a formaldehyde-free cornstarch-tannin wood adhesive for interior plywood
- (2010) Amine Moubarik et al. European Journal of Wood and Wood Products
- Hybrid chipboard panels based on sugarcane bagasse, urea formaldehyde and melamine formaldehyde resin
- (2010) Roberto Monteiro de Barros Filho et al. INDUSTRIAL CROPS AND PRODUCTS
- Thermal behavior of modified urea–formaldehyde resins
- (2010) Suzana Samaržija-Jovanović et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- On the measurement of formaldehyde release from low-emission wood-based panels using the perforator method
- (2010) E. Roffael et al. WOOD SCIENCE AND TECHNOLOGY
- Evaluation of the physical, mechanical properties and formaldehyde emission of particleboard manufactured from waste stone pine (Pinus pinea L.) cones
- (2009) Umit Buyuksari et al. BIORESOURCE TECHNOLOGY
- Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite
- (2009) Nadir Ayrilmis et al. FOREST ECOLOGY AND MANAGEMENT
- Hydrolytic stability of cured urea-formaldehyde resins modified by additives
- (2009) Zaimatul Aqmar Abdullah et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Environment-friendly adhesives for surface bonding of wood-based flooring using natural tannin to reduce formaldehyde and TVOC emission
- (2008) Sumin Kim BIORESOURCE TECHNOLOGY
- The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials
- (2008) Sumin Kim CONSTRUCTION AND BUILDING MATERIALS
- Thermal curing behavior of modified urea-formaldehyde resin adhesives with two formaldehyde scavengers and their influence on adhesion performance
- (2008) Byung-Dae Park et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Influence of nanoclay on urea-formaldehyde resins for wood adhesives and its model
- (2008) Hong Lei et al. JOURNAL OF APPLIED POLYMER SCIENCE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started