Effect of Oxide Dispersoids on Precipitation-Strengthened Al-1.7Zr (wt.%) Alloys Produced by Laser Powder-bed Fusion

Creep properties and microstructure evolution at 260–300 °C of AlSi10Mg manufactured via laser powder-bed fusion

(2022) Jennifer A. Glerum et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Numerical modeling of oxide particle evolution during additive manufacturing

(2022) Du-Rim Eo et al.   Additive Manufacturing

Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends

(2022) Jennifer A. Glerum et al.   Additive Manufacturing

Coarsening- and creep resistance of precipitation-strengthened Al–Mg–Zr alloys processed by selective laser melting

(2020) S. Griffiths et al.   ACTA MATERIALIA

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

(2020) Li Xinwei et al.   Additive Manufacturing

A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting

(2020) Mathieu Opprecht et al.   ACTA MATERIALIA

In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion

(2020) Peng Chen et al.   MATERIALS & DESIGN

Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends

(2020) Jennifer A. Glerum et al.   Additive Manufacturing

Alumina loss mechanism of Al2O3-AlSi10 Mg composites during selective laser melting

(2019) Hailong Liao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and room and high temperature mechanical properties of ultrafine structured Al-5 wt%Y2O3 and Al-5 wt%La2O3 nanocomposites fabricated by mechanical alloying and hot pressing

(2019) Tatsuaki Sakamoto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting

(2019) Ruidi Li et al.   MATERIALS & DESIGN

A new approach to synthesise high strength nano-oxide dispersion strengthened alloys

(2019) Chunlei Qiu   JOURNAL OF ALLOYS AND COMPOUNDS

Synthesis of a (ZrAl3+AlN)/Al composite and the influence of particles content and element Cu on the microstructure and mechanical properties

(2019) Tong Gao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Ambient- and elevated-temperature strengthening by Al3Zr-Nanoprecipitates and Al3Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at.%) alloy

(2019) Richard A. Michi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Factors that affect the properties of additively-manufactured AlSi10Mg: Porosity versus microstructure

(2019) Wen Hao Kan et al.   Additive Manufacturing

In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing

(2019) Qilin Guo et al.   Additive Manufacturing

Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting

(2018) Joseph R. Croteau et al.   ACTA MATERIALIA

Microstructure and mechanical properties of a precipitation-strengthened Al-Zr-Sc-Er-Si alloy with a very small Sc content

(2018) Anthony De Luca et al.   ACTA MATERIALIA

A heat treatable TiB 2 /Al-3.5Cu-1.5Mg-1Si composite fabricated by selective laser melting: Microstructure, heat treatment and mechanical properties

(2018) P. Wang et al.   COMPOSITES PART B-ENGINEERING

Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys

(2018) Xiaojia Nie et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Precipitation behavior of L1 2 Al 3 Zr phase in Al-Mg-Zr alloy

(2018) A.V. Mikhaylovskaya et al.   MATERIALS CHARACTERIZATION

Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy

(2018) S. Griffiths et al.   MATERIALS CHARACTERIZATION

Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion

(2018) Fuyao Yan et al.   SCRIPTA MATERIALIA

Melt spreading behavior, microstructure evolution and wear resistance of selective laser melting additive manufactured AlN/AlSi10Mg nanocomposite

(2018) Donghua Dai et al.   SURFACE & COATINGS TECHNOLOGY

Influence of SLM scan-speed on microstructure, precipitation of Al 3 Sc particles and mechanical properties in Sc- and Zr-modified Al-Mg alloys

(2018) A.B. Spierings et al.   MATERIALS & DESIGN

Precipitation hardening in dilute Al–Zr alloys

(2018) Pedro Henrique Lamarão Souza et al.   Journal of Materials Research and Technology-JMR&T

Selective laser melting of nano-TiN modified AlSi10Mg composite powder with low laser reflectivity

(2018) Chaofeng Gao et al.   MATERIALS LETTERS

Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates

(2018) C. Suwanpreecha et al.   ACTA MATERIALIA

SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment

(2017) A.B. Spierings et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

3D printing of high-strength aluminium alloys

(2017) John H. Martin et al.   NATURE

Microstructure evolution and mechanical properties of Al-Al2O3 composites fabricated by selective laser melting

(2017) Jiubin Jue et al.   POWDER TECHNOLOGY

Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy

(2017) Hu Zhang et al.   SCRIPTA MATERIALIA

Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting

(2017) A.B. Spierings et al.   MATERIALS & DESIGN

Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting

(2016) Adriaan B. Spierings et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Synthesis and characterisation of advanced ball-milled Al-Al 2 O 3 nanocomposites for selective laser melting

(2016) Quanquan Han et al.   POWDER TECHNOLOGY

Direct nucleation and growth of peritectic phase induced by substantial undercooling condition

(2013) Wei Zhai et al.   MATERIALS LETTERS

Effect of Al alloys on selective laser melting behaviour and microstructure of in situ formed particle reinforced composites

(2012) S. Dadbakhsh et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Coarsening resistance at 400°C of precipitation-strengthened Al–Zr–Sc–Er alloys

(2011) Christopher Booth-Morrison et al.   ACTA MATERIALIA

Modeling the creep threshold stress due to climb of a dislocation in the stress field of a misfitting precipitate

(2011) Matthew E. Krug et al.   ACTA MATERIALIA

Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600°C

(2008) K KNIPLING   ACTA MATERIALIA

Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at.%) alloys at 300–400°C

(2008) K KNIPLING et al.   SCRIPTA MATERIALIA

Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during isothermal aging at 375–425°C

(2007) Keith E. Knipling et al.   ACTA MATERIALIA

Peritectic reaction and its influences on the microstructures evolution during directional solidification of Fe–Ni alloys

(2007) L.S. Luo et al.   JOURNAL OF ALLOYS AND COMPOUNDS