Influence of Elevated Temperatures and Cooling Method on the Microstructure Development and Phase Evolution of Alkali-Activated Slag

Deterioration of an industrial reinforced concrete structure exposed to high temperatures and dry-wet cycles

(2022) Xiguang Liu et al.   ENGINEERING FAILURE ANALYSIS

Clinkerless ultra-high strength concrete based on alkali-activated slag at high temperatures

(2021) Rongjin Cai et al.   CEMENT AND CONCRETE RESEARCH

A chemo-damage-transport model for chloride ions diffusion in cement-based materials: Combined effects of sulfate attack and temperature

(2021) Penggang Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Fresh and hardened properties of alkali-activated fly ash/slag binders: effect of fly ash source, surface area, and additives

(2021) Yanru Wang et al.   Journal of Sustainable Cement-Based Materials

High temperature properties of graphene oxide modified metakaolin based geopolymer paste

(2021) Maosen Li et al.   CEMENT & CONCRETE COMPOSITES

Multi-structural evolution of conductive reactive powder concrete manufactured by enhanced ohmic heating curing

(2021) Weichen Tian et al.   CEMENT & CONCRETE COMPOSITES

Turning sandstone clay into supplementary cementitious material: activation and pozzolanic reactivity evaluation

(2021) Yubin Cao et al.   COMPOSITES PART B-ENGINEERING

A chemo-thermo-damage-transport model for concrete subjected to combined chloride-sulfate attack considering the effect of calcium leaching

(2021) Penggang Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature

(2020) Alaa M. Rashad et al.   CEMENT & CONCRETE COMPOSITES

Ladle slag characteristics and use in mortar and concrete: A comprehensive review

(2020) Omar Najm et al.   JOURNAL OF CLEANER PRODUCTION

Application of eco-friendly alternative activators in alkali-activated materials: A review

(2020) Beatryz C. Mendes et al.   Journal of Building Engineering

Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze–thaw cycles

(2019) Yanru Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of alkali dosage and silicate modulus on carbonation of alkali-activated slag mortars

(2018) Zhenguo Shi et al.   CEMENT AND CONCRETE RESEARCH

Examination of alkali-activated material nanostructure during thermal treatment

(2018) Brant Walkley et al.   JOURNAL OF MATERIALS SCIENCE

Hydration, mechanical properties and durability of high-strength concrete under different curing conditions

(2018) Fanghui Han et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Research on anti-chloride ion penetration property of crumb rubber concrete at different ambient temperatures

(2018) Han Zhu et al.   CONSTRUCTION AND BUILDING MATERIALS

The influence of curing conditions and alkaline activator concentration on elevated temperature behavior of alkali activated slag (AAS) mortars

(2018) Danial Nasr et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of Air Entrainment on the Mechanical Properties, Chloride Migration, and Microstructure of Ordinary Concrete and Fly Ash Concrete

(2018) Peng Zhang et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Influence of Activator Na2O Concentration on Residual Strengths of Alkali-Activated Slag Mortar upon Exposure to Elevated Temperatures

(2018) Tai Tran et al.   Materials

Effect of elevated temperature on alkali-activated geopolymeric binders compared to portland cement-based binders

(2016) O.G. Rivera et al.   CEMENT AND CONCRETE RESEARCH

Microstructural alteration of alkali activated slag mortars depend on exposed high temperature level

(2016) Hakan Tacettin Türker et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties and microstructure of alkali-activated slag cement cured at below- and about-normal temperature

(2015) Ya-min Gu et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of fly ash and metakaolín based geopolymer panels under fire resistance tests

(2015) Y. Luna-Galiano et al.   MATERIALES DE CONSTRUCCION

Use of glass waste as an activator in the preparation of alkali-activated slag. Mechanical strength and paste characterisation

(2014) F. Puertas et al.   CEMENT AND CONCRETE RESEARCH

Characterization of alkali activated slag paste after exposure to high temperatures

(2013) Pavel Rovnaník et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of nucleation seeding on the hydration kinetics and compressive strength of alkali activated slag paste

(2011) Mija H. Hubler et al.   CEMENT AND CONCRETE RESEARCH

Durability of alkali-activated binders: A clear advantage over Portland cement or an unproven issue?

(2011) F. Pacheco-Torgal et al.   CONSTRUCTION AND BUILDING MATERIALS

Geopolymer and Portland cement concretes in simulated fire

(2011) R. Zhao et al.   MAGAZINE OF CONCRETE RESEARCH

Residual strength properties of sodium silicate alkali activated slag paste exposed to elevated temperatures

(2009) Maurice Guerrieri et al.   MATERIALS AND STRUCTURES

New Cementitious Materials Based on Alkali-Activated Fly Ash: Performance at High Temperatures

(2008) Ana Fernández-Jiménez et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Sustainable development and climate change initiatives

(2007) J.S. Damtoft et al.   CEMENT AND CONCRETE RESEARCH

Effect of temperature on porosity and on chloride diffusion in cement pastes

(2007) Sabine Caré   CONSTRUCTION AND BUILDING MATERIALS

Change in microstructure of hardened cement paste subjected to elevated temperatures

(2006) Gai-Fei Peng et al.   CONSTRUCTION AND BUILDING MATERIALS