- Home
- Publications
- Publication Search
- Publication Details
Title
Optimal Design of Double-Walled Corrugated Board Packaging
Authors
Keywords
-
Journal
Materials
Volume 15, Issue 6, Pages 2149
Publisher
MDPI AG
Online
2022-03-16
DOI
10.3390/ma15062149
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Non-Local Sensitivity Analysis and Numerical Homogenization in Optimal Design of Single-Wall Corrugated Board Packaging
- (2022) Damian Mrówczyński et al. Materials
- Analytical Determination of the Bending Stiffness of a Five-Layer Corrugated Cardboard with Imperfections
- (2022) Tomasz Garbowski et al. Materials
- Application of homogenization approaches to the numerical analysis of seating made of multi-wall corrugated cardboard
- (2021) Berta Suarez et al. COMPOSITE STRUCTURES
- Estimation of the Compressive Strength of Corrugated Cardboard Boxes with Various Perforations
- (2021) Tomasz Garbowski et al. Energies
- Determination of Transverse Shear Stiffness of Sandwich Panels with a Corrugated Core by Numerical Homogenization
- (2021) Tomasz Garbowski et al. Materials
- Mechanical Behavior Modeling of Containers and Octabins Made of Corrugated Cardboard Subjected to Vertical Stacking Loads
- (2021) Javier Gallo et al. Materials
- Crushing of Double-Walled Corrugated Board and Its Influence on the Load Capacity of Various Boxes
- (2021) Tomasz Gajewski et al. Energies
- Crushing of Single-Walled Corrugated Board during Converting: Experimental and Numerical Study
- (2021) Tomasz Garbowski et al. Energies
- Numerical Homogenization of Multi-Layered Corrugated Cardboard with Creasing or Perforation
- (2021) Tomasz Garbowski et al. Materials
- Estimation of the Compressive Strength of Corrugated Board Boxes with Shifted Creases on the Flaps
- (2021) Damian Mrówczyński et al. Materials
- Full-Field Measurements in the Edge Crush Test of a Corrugated Board—Analytical and Numerical Predictive Models
- (2021) Tomasz Garbowski et al. Materials
- Numerical and Experimental Study of Five-Layer Non-Symmetrical Paperboard Panel Stiffness
- (2021) Leszek Czechowski et al. Materials
- New Edge Crush Test Configuration Enhanced with Full-Field Strain Measurements
- (2021) Tomasz Garbowski et al. Materials
- Modelling the impact of crushing on the strength performance of corrugated fibreboard
- (2020) Mohamad Aiman Jamsari et al. PACKAGING TECHNOLOGY AND SCIENCE
- An analysis of the influence of hand hole and ventilation hole design on compressive strength of corrugated fiberboard boxes by an artificial neural network model
- (2020) Tita Archaviboonyobul et al. PACKAGING TECHNOLOGY AND SCIENCE
- Deformation and compressive strength of corrugated cartons under different indentation shapes: Experimental and simulation study
- (2020) Guifen Gong et al. PACKAGING TECHNOLOGY AND SCIENCE
- Experimental Research and Numerical Analysis of the Elastic Properties of Paper Cell Cores before and after Impregnation
- (2020) Michał Słonina et al. Materials
- Numerical prediction on the mechanical degradation of adhesively bonded corrugated sandwich beam after hygrothermal ageing
- (2020) Xiao Han et al. COMPOSITE STRUCTURES
- Evaluating the displacement field of paperboard packages subjected to compression loading using digital image correlation (DIC)
- (2020) Tobi Fadiji et al. FOOD AND BIOPRODUCTS PROCESSING
- The effect of pallet top deck stiffness on the compression strength of asymmetrically supported corrugated boxes
- (2020) Chandler Quesenberry et al. PACKAGING TECHNOLOGY AND SCIENCE
- The Role of Buckling in the Estimation of Compressive Strength of Corrugated Cardboard Boxes
- (2020) Tomasz Garbowski et al. Materials
- Finite Element-Based Simulation for Edgewise Compression Behavior of Corrugated Paperboard for Packaging of Agricultural Products
- (2020) Jongmin Park et al. Applied Sciences-Basel
- Experimental and numerical performance of corrugated fibreboard at different orientations under four‐point bending test
- (2019) Mohamad Aiman Jamsari et al. PACKAGING TECHNOLOGY AND SCIENCE
- Quasi-static axial crushing of single wall corrugated paperboard
- (2019) Jing Bai et al. COMPOSITE STRUCTURES
- An asymptotic homogenization approach to the microstructural evolution of heterogeneous media
- (2018) Ariel Ramírez-Torres et al. INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS
- Three scales asymptotic homogenization and its application to layered hierarchical hard tissues
- (2018) Ariel Ramírez-Torres et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Static analysis of corrugated panels using homogenization models and a cell-based smoothed mindlin plate element (CS-MIN3)
- (2018) Nhan Nguyen-Minh et al. Frontiers of Structural and Civil Engineering
- Application of finite element analysis to predict the mechanical strength of ventilated corrugated paperboard packaging for handling fresh produce
- (2018) Tobi Fadiji et al. BIOSYSTEMS ENGINEERING
- Analysis of the performance of adhesively bonded corrugated core sandwich structures using cohesive zone method
- (2017) Ganiy Akhmet et al. JOURNAL OF SANDWICH STRUCTURES & MATERIALS
- An industry-oriented strategy for the finite element simulation of paperboard creasing and folding
- (2017) Marco Domaneschi et al. PACKAGING TECHNOLOGY AND SCIENCE
- Compression strength of ventilated corrugated paperboard packages: Numerical modelling, experimental validation and effects of vent geometric design
- (2016) Tobi Fadiji et al. BIOSYSTEMS ENGINEERING
- Finite Element Analysis of Hot Melt Adhesive Joints in Carton Board
- (2014) Nils Hallbäck et al. PACKAGING TECHNOLOGY AND SCIENCE
- Analytical post-buckling model of corrugated board panels using digital image correlation measurements
- (2013) J. Viguié et al. COMPOSITE STRUCTURES
- Corrugated Box Compression-A Literature Survey
- (2013) Benjamin Frank PACKAGING TECHNOLOGY AND SCIENCE
- Surface stress and strain fields on compressed panels of corrugated board boxes. An experimental analysis by using Digital Image Stereocorrelation
- (2011) J. Viguié et al. COMPOSITE STRUCTURES
- A Shear-Corrected Formulation for the Sandwich Twist Specimen
- (2011) F. Avilés et al. EXPERIMENTAL MECHANICS
- A constitutive model for the mechanical response of the folding of creased paperboard
- (2011) A. Giampieri et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Measuring thickness changes of edgewise compression loaded corrugated board panels using digital image correlation
- (2011) Rickard Hägglund et al. JOURNAL OF SANDWICH STRUCTURES & MATERIALS
- Preserving the strength of corrugated cardboard under high humidity condition using nano-sized mists
- (2010) Duong Van Hung et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Analytic homogenization for torsion of orthotropic sandwich plates: Application to corrugated cardboard
- (2009) B. Abbès et al. COMPOSITE STRUCTURES
- An experimental and computational study of laminated paperboard creasing and folding
- (2009) L.A.A. Beex et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Experimental and numerical investigation of creasing in corrugated paperboard
- (2008) B.K. Thakkar et al. PHILOSOPHICAL MAGAZINE
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started