High superelasticity NiTi fabricated by cold metal transfer based wire arc additive manufacturing

Dissimilar joining of stainless steel and aluminum using twin-wire CMT

(2021) Wanghui Xu et al.   Welding in the World

Improved superelastic stability of NiTi shape memory alloys through surface nano-crystallization followed by low temperature aging treatment

(2021) Xiaoqiang Li et al.   INTERMETALLICS

Microstructures and Mechanical Properties of Equiatomic NiTi Shape Memory Alloy Undergoing Local Canning Compression and Subsequent Annealing

(2021) Dong Sun et al.   METALS AND MATERIALS INTERNATIONAL

Effect of different variants of filler metal S Ni 6625 on properties and microstructure by additive layer manufactured using CMT process

(2021) Manuela Zinke et al.   Welding in the World

Investigation of TIG Cladding of NiTi Wire on Substrate 304L to Study the Effect of Applied Current on Microstructure and Mechanical Properties

(2021) Pramod Kumar et al.   TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS

Investigations on NiTi shape memory alloy thin wall structures through laser marking assisted wire arc based additive manufacturing

(2021) Shalini Singh et al.   Journal of Manufacturing Processes

Correlations between two EBSD-based metrics Kernel Average Misorientation and Image Quality on indicating dislocations of near-failure low alloy steels induced by tensile and cyclic deformations

(2021) Shao-Shi Rui et al.   Materials Today Communications

System study of the formability, nitrogen behaviour and microstructure features of the CMT wire and arc additively manufactured high nitrogen Cr-Mn stainless steel

(2021) Xiaoyong Zhang et al.   Materials Today Communications

Stable tensile recovery strain induced by a Ni4Ti3 nanoprecipitate in a Ni50.4Ti49.6 shape memory alloy fabricated via selective laser melting

(2021) H.Z. Lu et al.   ACTA MATERIALIA

Fracture and fatigue in additively manufactured metals

(2021) Thorsten Hermann Becker et al.   ACTA MATERIALIA

Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing

(2021) Lin Yu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Additive manufacturing of high performance AZ31 magnesium alloy with full equiaxed grains: Microstructure, mechanical property, and electromechanical corrosion performance

(2021) Xuewei Fang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effects of β-cooling rates on microstructural characteristics and hardness of Ti–5Al–5Mo–5V–3Cr–1Fe metastable β Ti alloy

(2021) Zhiying Zheng et al.   MATERIALS CHEMISTRY AND PHYSICS

Grain size-dependent energy partition in phase transition of NiTi shape memory alloys studied by molecular dynamics simulation

(2020) Kai Nie et al.   INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES

Enhancing hardness of Inconel 718 deposits using the aging effects of cold metal transfer-based additive manufacturing

(2020) Donghyun Van et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties

(2020) Z. Zeng et al.   Additive Manufacturing

Correlation of microstructural, textural characteristics and hardness of Ti–6Al–4V sheet β-cooled at different rates

(2020) Jiahong Dai et al.   JOURNAL OF MATERIALS SCIENCE

Tailored pore canal characteristics and compressive deformation behavior of bionic porous NiTi shape memory alloy prepared by selective laser melting

(2020) Chenglong Ma et al.   Smart Materials and Structures

Superelastic Effect in NiTi Alloys Manufactured Using Electron Beam and Focused Laser Rapid Manufacturing Methods

(2020) Jan Dutkiewicz et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Process response of Inconel 718 to wire + arc additive manufacturing with cold metal transfer

(2020) Renan Medeiros Kindermann et al.   MATERIALS & DESIGN

Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy

(2020) Jun Wang et al.   Additive Manufacturing

Study on microstructure and tensile properties of 316L stainless steel fabricated by CMT wire and arc additive manufacturing

(2020) C. Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Concurrent geometry- and material-based process identification and optimization for robotic CMT-based wire arc additive manufacturing

(2020) Thomas Lehmann et al.   MATERIALS & DESIGN

Structure, martensitic transformations and mechanical behaviour of NiTi shape memory alloy produced by wire arc additive manufacturing

(2020) N. Resnina et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure evolution in a severely cold-worked NiTi wire during ageing treatment: An in situ neutron diffraction study

(2020) Zifan Wang et al.   MATERIALS LETTERS

Microstructure evolution of wire-arc additively manufactured 2319 aluminum alloy with interlayer hammering

(2020) Xuewei Fang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparative study on crystallographic orientation, precipitation, phase transformation and mechanical response of Ni-rich NiTi alloy fabricated by WAAM at elevated substrate heating temperatures

(2020) Jun Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of varisized Ni4Ti3 precipitate on the phase transformation behavior and functional stability of Ti-50.8 at.% Ni alloys

(2020) Shan Liu et al.   MATERIALS CHARACTERIZATION

Study on microstructure and tensile properties of high nitrogen Cr-Mn steel processed by CMT wire and arc additive manufacturing

(2019) Xiaoyong Zhang et al.   MATERIALS & DESIGN

Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing

(2019) Jun Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Large superelastic recovery and elastocaloric effect in as-deposited additive manufactured Ni50.8Ti49.2 alloy

(2019) Xueman Wan et al.   APPLIED PHYSICS LETTERS

Additive manufacturing of NiTi shape memory alloys using pre-mixed powders

(2019) C. Wang et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Effect of characteristic substrate parameters on the deposition geometry of CMT additive manufactured Al-6.3%Cu alloy

(2019) Xuewei Fang et al.   APPLIED THERMAL ENGINEERING

Effects of aging temperature and aging time on the mechanism of martensitic transformation in nickel-rich NiTi shape memory alloys

(2019) I. Kaya et al.   MATERIALS CHARACTERIZATION

Microstructural evolution and mechanical properties of deep cryogenic treated Cu–Al–Si alloy fabricated by Cold Metal Transfer (CMT) process

(2019) Kun Liu et al.   MATERIALS CHARACTERIZATION

On the effects of selective laser melting process parameters on microstructure and thermomechanical response of Ni-rich NiTi

(2018) Soheil Saedi et al.   ACTA MATERIALIA

Effect of heat treatment on microstructure, corrosion, and shape memory characteristics of laser deposited NiTi alloy

(2018) Jithin J. Marattukalam et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fatigue behavior and cyclic deformation of additive manufactured NiTi

(2018) Allen Bagheri et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials

(2018) Ke Huang et al.   PROGRESS IN MATERIALS SCIENCE

Selective electron beam melting of NiTi: Microstructure, phase transformation and mechanical properties

(2018) Quan Zhou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Analysis of laser–melt pool–powder bed interaction during the selective laser melting of a stainless steel

(2017) Valérie Gunenthiram et al.   JOURNAL OF LASER APPLICATIONS

Fabrication of Copper-Rich Cu-Al Alloy Using the Wire-Arc Additive Manufacturing Process

(2017) Bosheng Dong et al.   METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE

Welding and Joining of NiTi Shape Memory Alloys: A Review

(2017) J.P. Oliveira et al.   PROGRESS IN MATERIALS SCIENCE

The development of TiNi-based negative Poisson's ratio structure using selective laser melting

(2016) Sheng Li et al.   ACTA MATERIALIA

Investigations on the parametric effects of cold metal transfer process on the microstructural aspects in AA6061

(2016) Nalajam Pavan Kumar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fabrication of NiTi through additive manufacturing: A review

(2016) Mohammad Elahinia et al.   PROGRESS IN MATERIALS SCIENCE

A review of shape memory alloy research, applications and opportunities

(2013) Jaronie Mohd Jani et al.   MATERIALS & DESIGN

Influence of Ni on martensitic phase transformations in NiTi shape memory alloys

(2010) J. Frenzel et al.   ACTA MATERIALIA