In situ enhance lithium polysulfides redox kinetics by carbon cloth/MoO3 self-standing electrode for lithium–sulfur battery

The Fundamental Understanding of Lithium Polysulfides in Ether-Based Electrolyte for Lithium–Sulfur Batteries

(2021) Bohai Zhang et al.   ACS Energy Letters

Preparation and Electrochemical Performance of V2O5 @N-CNT/S Composite Cathode Materials

(2021) Cheng Liu et al.   Frontiers in Energy Research

A high-safety and multifunctional MOFs modified aramid nanofiber separator for lithium-sulfur batteries

(2021) Jianwei Liu et al.   CHEMICAL ENGINEERING JOURNAL

Self-templating synthesis of prismatic-like N-doped carbon tubes embedded with Fe3O4 as a high-efficiency polysulfide-anchoring-conversion mediator for high performance lithium-sulfur batteries

(2021) Shasha Xin et al.   CHEMICAL ENGINEERING JOURNAL

Structure Design and Composition Engineering of Carbon‐Based Nanomaterials for Lithium Energy Storage

(2020) Hongya Geng et al.   Advanced Energy Materials

3D Vertically Aligned Li Metal Anodes with Ultrahigh Cycling Currents and Capacities of 10 mA cm −2 /20 mAh cm −2 Realized by Selective Nucleation within Microchannel Walls

(2020) Xuejie Gao et al.   Advanced Energy Materials

High loading cotton cellulose-based aerogel self-standing electrode for Li-S batteries

(2020) Heng Mao et al.   Science Bulletin

Octopus-Inspired Design of Apical NiS2 Nanoparticles Supported on Hierarchical Carbon Composites as an Efficient Host for Lithium Sulfur Batteries with High Sulfur Loading

(2020) Ning Wang et al.   ACS Applied Materials & Interfaces

A retrospective on lithium-ion batteries

(2020) Jing Xie et al.   Nature Communications

“Room-like” TiO2 Array as a Sulfur Host for Lithium-Sulfur Batteries: Combining Advantages of Array and Closed Structures

(2020) Junling Guo et al.   ACS Sustainable Chemistry & Engineering

Rational design of porous nitrogen-doped Ti3C2 MXene as a multifunctional electrocatalyst for Li–S chemistry

(2020) Yingze Song et al.   Nano Energy

Effect of dispersant on the synthesis of cotton textile waste–based activated carbon by FeCl2 activation: characterization and adsorption properties

(2020) Renzhi Qi et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Hybrids of La2O3 nanoplates anchored in three-dimensional carbon nanotubes microspheres as efficient sulfur-hosts for highperformance lithium/sulfur batteries

(2020) Guanghui Yuan et al.   MATERIALS LETTERS

A Novel α‐MoO 3 /Single‐Walled Carbon Nanohorns Composite as High‐Performance Anode Material for Fast‐Charging Lithium‐Ion Battery

(2020) Sumit Ranjan Sahu et al.   Advanced Energy Materials

Vertically aligned graphene nanosheets on multi-yolk/shell structured TiC@C nanofibers for stable Li–S batteries

(2020) Yongshang Zhang et al.   Energy Storage Materials

Stable Lithium Sulfur Battery Based on In Situ Electrocatalytically Formed Li 2 S on Metallic MoS 2 –Carbon Cloth Support

(2020) Mingshan Wang et al.   Small Methods

Vapor deposition of aluminium oxide into N-rich mesoporous carbon framework as a reversible sulfur host for lithium-sulfur battery cathode

(2020) Fei Sun et al.   Nano Research

In situ visualization by X-Ray computed tomography on sulfur stabilization and lithium polysulfides immobilization in S@HCS/MnO cathode

(2020) Ruoyu Xu et al.   Energy Storage Materials

Strategy of Enhancing the Volumetric Energy Density for Lithium–Sulfur Batteries

(2020) Ya‐Tao Liu et al.   ADVANCED MATERIALS

Ruthenium solubility and its impact on the crystallization behavior and electrical conductivity of MoO3-containing borosilicate-based model high-level nuclear waste glasses

(2020) Hrishikesh Kamat et al.   JOURNAL OF NON-CRYSTALLINE SOLIDS

1D Carbon‐Based Nanocomposites for Electrochemical Energy Storage

(2019) Changwei Shi et al.   Small

Enhanced photocatalytic properties of defect-rich α-MoO3 nanoflakes by cavitation and pitting effect

(2019) Binjie Zheng et al.   JOURNAL OF HAZARDOUS MATERIALS

Adsorption‐Catalysis Design in the Lithium‐Sulfur Battery

(2019) Miao Zhang et al.   Advanced Energy Materials

Freestanding Double-Layer MoO3/CNT@S Membrane: A Promising Flexible Cathode for Lithium–Sulfur Batteries

(2019) Dong Chen et al.   ACS Applied Materials & Interfaces

Synthesis of nitrogen-doped oxygen-deficient TiO2-x/reduced graphene oxide/sulfur microspheres via spray drying process for lithium-sulfur batteries

(2019) Guifeng Chen et al.   ELECTROCHIMICA ACTA

Theoretical Calculation Guided Design of Single-Atom Catalysts toward Fast Kinetic and Long-Life Li–S Batteries

(2019) Guangmin Zhou et al.   NANO LETTERS

In-situ topochemical nitridation derivative MoO2–Mo2N binary nanobelts as multifunctional interlayer for fast-kinetic Li-Sulfur batteries

(2019) Jin-Lin Yang et al.   Nano Energy

Combining theory and experiment in lithium–sulfur batteries: Current progress and future perspectives

(2018) Xiang Chen et al.   Materials Today

An interwoven MoO3@CNT scaffold interlayer for high-performance lithium–sulfur batteries

(2018) Laiyan Luo et al.   Journal of Materials Chemistry A

Electrocatalysis on Separator Modified by Molybdenum Trioxide Nanobelts for Lithium-Sulfur Batteries

(2018) Sumair Imtiaz et al.   Advanced Materials Interfaces

Facile synthesis of three dimensional porous cellular carbon as sulfur host for enhanced performance lithium sulfur batteries

(2018) Yiqi Wang et al.   ELECTROCHIMICA ACTA

2D MoN-VN Heterostructure To Regulate Polysulfides for Highly Efficient Lithium-Sulfur Batteries

(2018) Chao Ye et al.   ANGEWANDTE CHEMIE-INTERNATIONAL EDITION

Three-dimensional MoS2/rGO foams as efficient sulfur hosts for high-performance lithium-sulfur batteries

(2018) Yu You et al.   CHEMICAL ENGINEERING JOURNAL

Tin Intercalated Ultrathin MoO3 Nanoribbons for Advanced Lithium-Sulfur Batteries

(2018) Weiwei Yang et al.   Advanced Energy Materials

Mechanistic Insights into Surface Chemical Interactions between Lithium Polysulfides and Transition Metal Oxides

(2017) Yiren Zhong et al.   Journal of Physical Chemistry C

Freestanding Flexible Li2 S Paper Electrode with High Mass and Capacity Loading for High-Energy Li-S Batteries

(2017) Mingliang Yu et al.   Advanced Energy Materials

Burning lithium in CS2 for high-performing compact Li2S–graphene nanocapsules for Li–S batteries

(2017) Guoqiang Tan et al.   Nature Energy

A Spinel-Integrated P2-Type Layered Composite: High-Rate Cathode for Sodium-Ion Batteries

(2016) Jianming Zheng et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts

(2016) Zhe Yuan et al.   NANO LETTERS

Flexible graphene devices related to energy conversion and storage

(2015) Xiluan Wang et al.   Energy & Environmental Science

Structural Design of Cathodes for Li-S Batteries

(2015) Michael A. Pope et al.   Advanced Energy Materials

Metal Oxide Induced Charge Transfer Doping and Band Alignment of Graphene Electrodes for Efficient Organic Light Emitting Diodes

(2014) Jens Meyer et al.   Scientific Reports

Synthesis of h- andα-MoO3by Refluxing and Calcination Combination: Phase and Morphology Transformation, Photocatalysis, and Photosensitization

(2013) Pannipa Wongkrua et al.   Journal of Nanomaterials

Role of Polysulfides in Self-Healing Lithium-Sulfur Batteries

(2013) Rui Xu et al.   Advanced Energy Materials

High capacity micro-mesoporous carbon–sulfur nanocomposite cathodes with enhanced cycling stability prepared by a solvent-free procedure

(2013) Sören Thieme et al.   Journal of Materials Chemistry A

A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries

(2009) Xiulei Ji et al.   NATURE MATERIALS

Building better batteries

(2008) M. Armand et al.   NATURE