Strength-ductility synergy of reduced graphene oxide/2024Al matrix composites by heterogeneous structure design and hybrid nanoparticles optimized interface

GNPs/Al nanocomposites with high strength and ductility and electrical conductivity fabricated by accumulative roll-compositing

(2021) Zi-Hao Chen et al.   RARE METALS

Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution

(2021) Bai-Xin Dong et al.   COMPOSITES PART B-ENGINEERING

Hierarchical microstructure architecture: A roadmap towards strengthening and toughening reduced graphene oxide/2024Al matrix composites synthesized by flake powder thixoforming

(2020) Pubo Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Semisolid microstructural evolution of (CNTs + Sip)/AZ91D powder compacts prepared from powders by cold pressing and remelting

(2020) Pu-Bo Li et al.   RARE METALS

Effect of interfacial microstructure on the mechanical properties of GNPs/Al composites

(2020) Boyu Ju et al.   CARBON

Enhanced Mechanical Properties and Thermal Conductivity for GNPs/Al2024 Composites with In Situ SiC Nanorods

(2020) Lili Chen et al.   METALS AND MATERIALS INTERNATIONAL

Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticles

(2020) Peng Xiao et al.   COMPOSITES PART B-ENGINEERING

Enhancing strengthening efficiency of graphene nano-sheets in aluminum matrix composite by improving interface bonding

(2020) Z.Y. Liu et al.   COMPOSITES PART B-ENGINEERING

Recent progresses on designing and manufacturing of bulk refractory alloys with high performances based on controlling interfaces

(2020) T. Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Bioinspired hierarchical Al2O3/Al laminated composite fabricated by flake powder metallurgy

(2020) Zhiming Zhang et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Effect of graphene nanoparticles on the physical and mechanical properties of the Al2024-graphene nanocomposites fabricated by powder metallurgy

(2020) Waheed S. AbuShanab et al.   Results in Physics

Overcoming the strength-ductility trade-off of an aluminum matrix composite by novel core-shell structured reinforcing particulates

(2020) Xuezheng Zhang et al.   COMPOSITES PART B-ENGINEERING

Enhancing strength and ductility synergy through heterogeneous structure design in nanoscale Al2O3 particulate reinforced Al composites

(2019) Y.N. Zan et al.   MATERIALS & DESIGN

Calcined products of Mg–Al layered double hydroxides/single-walled carbon nanotubes nanocomposites for expeditious removal of phenol and 4-chlorophenol from aqueous solutions

(2019) Zhaoyang Zhang et al.   COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS

Fabrication and characterization of aluminum hybrid composites reinforced with silicon nitride/graphene nanoplatelet binary particles

(2019) Mahmut Can Şenel et al.   JOURNAL OF COMPOSITE MATERIALS

Strengthening 2024Al alloy by novel core-shell structured Ti/B4C composite particles

(2019) Guodong Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Controlled Preparation of MgAl-Layered Double Hydroxide/Graphene Hybrids and Their Applications for Metal Protection

(2019) Wen Sun et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Microstructure and synergistic strengthening mechanisms of carbon nanotubes and Mg2Si nanoparticles hybrid reinforced Mg matrix composites prepared by powder thixoforming

(2019) Pubo Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites

(2019) Baisong Guo et al.   CARBON

High efficiency dispersal and strengthening of graphene reinforced aluminum alloy composites fabricated by powder metallurgy combined with friction stir processing

(2018) Z.W. Zhang et al.   CARBON

Preparation mechanism of hierarchical layered structure of graphene/copper composite with ultrahigh tensile strength

(2018) Ziyue Yang et al.   CARBON

Fabrication and characterization of synergistic Al-SiC-GNPs hybrid composites

(2018) Mahmut Can Şenel et al.   COMPOSITES PART B-ENGINEERING

Calcined MgAl-Layered Double Hydroxide/Graphene Hybrids for Capacitive Deionization

(2018) Qidi Ren et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Graphene-Reinforced Aluminum Matrix Composites: A Review of Synthesis Methods and Properties

(2018) Fei Chen et al.   JOM

Interface design of graphene/copper composites by matrix alloying with titanium

(2018) Ke Chu et al.   MATERIALS & DESIGN

Graphene defect engineering for optimizing the interface and mechanical properties of graphene/copper composites

(2018) Ke Chu et al.   CARBON

Laser solid forming additive manufacturing TiB2 reinforced 2024Al composite: Microstructure and mechanical properties

(2018) Xiaoli Wen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The effect of sintering time, temperature, and graphene addition on the hardness and microstructure of aluminum composites

(2017) Mevlüt Gürbüz et al.   JOURNAL OF COMPOSITE MATERIALS

Interfacial characteristics and fracture behavior of spark-plasma-sintered TiNi fiber-reinforced 2024Al matrix composites

(2017) Peng Dong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles

(2016) Lin Jiang et al.   ACTA MATERIALIA

Effects of ultrasonic vibration on the microstructure and tensile properties of the nano ZrB 2 /2024Al composites synthesized by direct melt reaction

(2016) Xizhou Kai et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructures and mechanical properties of 2024Al/Gr/SiC hybrid composites fabricated by vacuum hot pressing

(2016) Cheng-jin HU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Effects of solution treatment on tensile properties and strengthening mechanisms of SiC p /6061Al composites fabricated by powder thixoforming

(2016) X.Z. Zhang et al.   MATERIALS & DESIGN

Effects of mold temperature on the microstructure and tensile properties of SiC p /2024 Al-based composites fabricated via powder thixoforming

(2016) P.B. Li et al.   MATERIALS & DESIGN

Graphene nanoplatelets induced heterogeneous bimodal structural magnesium matrix composites with enhanced mechanical properties

(2016) Shulin Xiang et al.   Scientific Reports

Extraordinary high ductility/strength of the interface designed bulk W-ZrC alloy plate at relatively low temperature

(2015) Z. M. Xie et al.   Scientific Reports

Microstructures and Properties of Graphene-Cu/Al Composite Prepared by a Novel Process Through Clad Forming and Improving Wettability with Copper

(2014) Zhan Yong Zhao et al.   ADVANCED ENGINEERING MATERIALS

Uniform dispersion of graphene oxide in aluminum powder by direct electrostatic adsorption for fabrication of graphene/aluminum composites

(2014) Zan Li et al.   NANOTECHNOLOGY

Al–TiO2–Gr powder metallurgy hybrid composites with cold upset forging

(2014) M. Ravichandran et al.   RARE METALS

Enhanced Mechanical Properties of Graphene/Copper Nanocomposites Using a Molecular-Level Mixing Process

(2013) Jaewon Hwang et al.   ADVANCED MATERIALS

Mechanical properties of graphene platelet-reinforced alumina ceramic composites

(2013) Jian Liu et al.   CERAMICS INTERNATIONAL

Calcined graphene/MgAl-layered double hydroxides for enhanced Cr(VI) removal

(2013) Xiaoya Yuan et al.   CHEMICAL ENGINEERING JOURNAL

Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles

(2013) Z. Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In situ growth of CuO nanoparticles on graphene matrix as anode material for lithium-ion batteries

(2013) Danfeng Qiu et al.   MATERIALS LETTERS

Reinforcement with graphene nanosheets in aluminum matrix composites

(2012) Jingyue Wang et al.   SCRIPTA MATERIALIA

The conflicts between strength and toughness

(2011) Robert O. Ritchie   NATURE MATERIALS

Facile Synthesis of Graphene Nanosheets via Fe Reduction of Exfoliated Graphite Oxide

(2010) Zhuang-Jun Fan et al.   ACS Nano

Direct synthesis of carbon nanofibers on the surface of copper powder

(2010) Larisa I. Nasibulina et al.   CARBON

Microstructural features influencing the strength of Trimodal Aluminum Metal-Matrix-Composites

(2010) Bo Yao et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Tensile properties and thermal stability of ZnO-coated aluminum borate whiskers reinforced 2024Al composite

(2010) H.Y. Yue et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The preparation of layered double hydroxide wrapped carbon nanotubes and their application as a flame retardant for polypropylene

(2010) Baoxian Du et al.   NANOTECHNOLOGY

Synthesis and thermal stability of hydrotalcites based upon gallium

(2009) Laure-Marie Grand et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Distribution characterization of boundary misorientation angle of 7050 aluminum alloy after high-temperature compression

(2008) Liang Zhen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY