Near-threshold fatigue crack growth in laser powder bed fusion produced alloy 718

The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion

(2021) S. Sanchez et al.   MATERIALS & DESIGN

Residual stress determination by neutron diffraction in powder bed fusion-built Alloy 718: Influence of process parameters and post-treatment

(2020) S. Goel et al.   MATERIALS & DESIGN

Creep deformation and failure properties of 316 L stainless steel manufactured by laser powder bed fusion under multiaxial loading conditions

(2020) Richard J. Williams et al.   Additive Manufacturing

Small scale testing of IN718 single crystals manufactured by EB-PBF

(2020) Martin R. Gotterbarm et al.   Additive Manufacturing

Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718

(2019) Arun Ramanathan Balachandramurthi et al.   MATERIALS CHARACTERIZATION

Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures

(2019) Sean Gribbin et al.   MATERIALS CHARACTERIZATION

Nanoindentation Based Properties of Inconel 718 at Elevated Temperatures: A Comparison of Conventional versus Additively Manufactured Samples

(2019) Hao Wang et al.   INTERNATIONAL JOURNAL OF PLASTICITY

In Situ Study of the Stress Relaxation During Aging of Nickel-Base Superalloy Forgings

(2019) P. E. Aba-Perea et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion

(2019) David B. Witkin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718

(2019) Thomas G. Gallmeyer et al.   Additive Manufacturing

A review of mechanical properties of additively manufactured Inconel 718

(2019) E. Hosseini et al.   Additive Manufacturing

Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting

(2018) Yoichi Yamashita et al.   INTERNATIONAL JOURNAL OF FATIGUE

Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718

(2018) Arun Ramanathan Balachandramurthi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Critical deposition height for sustainable restoration via laser additive manufacturing

(2018) Santanu Paul et al.   Scientific Reports

Fatigue crack closure: a review of the physical phenomena

(2017) R. Pippan et al.   FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES

Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment

(2017) Wakshum M. Tucho et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties

(2017) V.A. Popovich et al.   MATERIALS & DESIGN

Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting

(2017) V.A. Popovich et al.   MATERIALS & DESIGN

Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718

(2016) Sean Gribbin et al.   INTERNATIONAL JOURNAL OF FATIGUE

Long fatigue crack growth in Inconel 718 produced by selective laser melting

(2016) R. Konečná et al.   INTERNATIONAL JOURNAL OF FATIGUE

Superior creep strength of a nickel-based superalloy produced by selective laser melting

(2016) M. Pröbstle et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading

(2016) M.E. Aydinöz et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fatigue behavior of IN718 microtrusses produced via additive manufacturing

(2016) Lena Huynh et al.   MATERIALS & DESIGN

Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting

(2015) E. Chlebus et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering

(2015) L. M. Sochalski-Kolbus et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Site specific control of crystallographic grain orientation through electron beam additive manufacturing

(2014) R. R. Dehoff et al.   MATERIALS SCIENCE AND TECHNOLOGY

Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting

(2012) K.N. Amato et al.   ACTA MATERIALIA

Influence of Precipitated Phase Formation on Recrystallization Behavior of Superalloy 718

(2012) Hwa-Teng Lee et al.   MATERIALS TRANSACTIONS

Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy

(2010) Fencheng Liu et al.   OPTICS AND LASER TECHNOLOGY

Crack closure under high load-ratio conditions for Inconel-718 near threshold behavior

(2008) Y. Yamada et al.   ENGINEERING FRACTURE MECHANICS