Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites
Authors
Keywords
Poly(lactide), Carbon nanotubes, Dielectric properties
Journal
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
Volume 206, Issue -, Pages 661-669
Publisher
Elsevier BV
Online
2022-03-03
DOI
10.1016/j.ijbiomac.2022.02.183
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Chemical and mechanical reprocessed resins and bio-composites based on five epoxidized vegetable oils thermosets reinforced with flax fibers or PLA woven
- (2021) Chiara Di Mauro et al. COMPOSITES SCIENCE AND TECHNOLOGY
- A generalizable strategy toward highly tough and heat-resistant stereocomplex-type polylactide/elastomer blends with substantially enhanced melt processability
- (2021) Shihao Deng et al. POLYMER
- Selective localization of carbon nanotubes and its effect on the structure and properties of polymer blends
- (2021) Xiao-dong Qi et al. PROGRESS IN POLYMER SCIENCE
- Phase-selective conductivity enhancement and cooperativity length in PLLA/TPU nanocomposite blends with carboxylated carbon nanotubes
- (2020) Sofia Valenti et al. POLYMER
- Constructing Microcapacitor Network of Carbon Nanotubes in Polymer Blends via Crystallization-Induced Phase Separation toward High Dielectric Constant and Low Loss
- (2020) Hanjun Mao et al. ACS Applied Materials & Interfaces
- High-performance and functional PBT/EVMG/CNTs nanocomposites from recycled sources by in situ multistep reaction-induced interfacial control
- (2020) Ying Cao et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Shear-Induced Carbon Nanotube Migration and Morphological Development in Polylactide/Poly(vinylidene fluoride) Blend Nanocomposites and Their Impact on Dielectric Constants and Rheological Properties
- (2020) Reza Salehiyan et al. Journal of Physical Chemistry C
- Enhanced toughness of PLLA/PCL blends using poly(d-lactide)-poly(ε-caprolactone)-poly(d-lactide) as compatibilizer
- (2020) Xianglian Xiao et al. COMPOSITES COMMUNICATIONS
- Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
- (2019) Xin Wang et al. COMPOSITES PART B-ENGINEERING
- Significantly improved dielectric properties of polylactide nanocomposites via TiO2 decorated carbon nanotubes
- (2019) Wei Wu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Analysis of the roles of interphase, waviness and agglomeration of CNT in the electrical conductivity and tensile modulus of polymer/CNT nanocomposites by theoretical approaches
- (2018) Jia-Ming Zhu et al. COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
- PLA-PBAT-PLA tri-block copolymers: Effective compatibilizers for promotion of the mechanical and rheological properties of PLA/PBAT blends
- (2018) Yue Ding et al. POLYMER DEGRADATION AND STABILITY
- Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites
- (2018) Yinghui Zhou et al. POLYMER TESTING
- Mixing-Sequence Controlled Selective Localization Of Carbon Nanoparticles In PLA/PCL Blends
- (2018) Jéssica de Aguiar et al. POLYMER ENGINEERING AND SCIENCE
- High-k polymer nanocomposites with 1D filler for dielectric and energy storage applications
- (2018) Xingyi Huang et al. PROGRESS IN MATERIALS SCIENCE
- CNT-induced morphology and its effect on properties in PLA/PBAT-based nanocomposites
- (2017) J. Urquijo et al. EUROPEAN POLYMER JOURNAL
- Enhanced Dielectric Performance of Polymer Nanocomposites Based on CNT/MnO2 Nanowire Hybrid Nanostructure
- (2017) Ali Shayesteh Zeraati et al. Journal of Physical Chemistry C
- Mechanical properties and phase morphology of super-tough PLA/PBAT/EMA-GMA multicomponent blends
- (2017) Ningjing Wu et al. MATERIALS LETTERS
- An experimental study of the effect of CNTs on the mechanical properties of CNTs/NR/EPDM nanocomposite
- (2017) Seyed Mohamad Reza Paran et al. POLYMER COMPOSITES
- Application of linear rheology in determination of nanoclay localization in PLA/EVA/Clay nanocomposites: Correlation with microstructure and thermal properties
- (2016) Masoud Razavi Aghjeh et al. COMPOSITES PART B-ENGINEERING
- POEGMA-b-PAA comb-like polymer dispersant for Al2suspensions
- (2016) Anqi Wang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow
- (2016) M. Nofar et al. POLYMER
- Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends
- (2015) Liliane Cardoso Arruda et al. POLYMER TESTING
- In-situ compatibilization of poly(lactic acid) and poly(butylene adipate-co-terephthalate) blends by using dicumyl peroxide as a free-radical initiator
- (2014) P. Ma et al. POLYMER DEGRADATION AND STABILITY
- Role of surface chemical groups on carbon nanotubes in nucleation for polymer crystallization: Interfacial interaction and steric effect
- (2013) Yuan-Ying Liang et al. POLYMER
- Biodegradation behavior of poly(butylene adipate-co-terephthalate) (PBAT), poly(lactic acid) (PLA), and their blend under soil conditions
- (2013) Yun-Xuan Weng et al. POLYMER TESTING
- The effect of the addition of carbon nanotube fluids to a polymeric matrix to produce simultaneous reinforcement and plasticization
- (2012) Qi Li et al. CARBON
- Basalt fiber reinforced and elastomer toughened polylactide composites: Mechanical properties, rheology, crystallization, and morphology
- (2012) Tao Liu et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy
- (2012) Racha Al-Itry et al. POLYMER DEGRADATION AND STABILITY
- Highly dispersed and electrically conductive polycarbonate/oxidized carbon nanofiber composites for electrostatic dissipation applications
- (2010) S. Kumar et al. CARBON
- The influence of carbon nanotubes on the PVC glass transition temperature
- (2010) T. Sterzyński et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Mechanical properties of PLA composites with man-made cellulose and abaca fibres
- (2009) Andrzej K. Bledzki et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- High Dielectric Permittivity and Low Percolation Threshold in Nanocomposites Based on Poly(vinylidene fluoride) and Exfoliated Graphite Nanoplates
- (2008) Fuan He et al. ADVANCED MATERIALS
- Large dielectric constant of the chemically functionalized carbon nanotube/polymer composites
- (2008) Q LI et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effects of acid- and diamine-modified MWNTs on the mechanical properties and crystallization behavior of polyamide 6
- (2007) H. Meng et al. POLYMER
Add your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started