Recent developments in the performance of micro/nanoparticle-modified urea-formaldehyde resins used as wood-based composite binders: A review
Published 2022 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Recent developments in the performance of micro/nanoparticle-modified urea-formaldehyde resins used as wood-based composite binders: A review
Authors
Keywords
Composite, Micro/nanoparticle, Urea-formaldehyde resins, Wood adhesives
Journal
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
Volume 114, Issue -, Pages 103106
Publisher
Elsevier BV
Online
2022-01-14
DOI
10.1016/j.ijadhadh.2022.103106
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Recent advances in carbon-based nanomaterials for flame retardant polymers and composites
- (2021) Sherif Araby et al. COMPOSITES PART B-ENGINEERING
- Microwave-assisted laminated veneer lumber (LVL): Investigation on the effect of preheating time and moisture content on resin penetration and bonding quality
- (2021) Mohammad Farajollah Pour et al. CONSTRUCTION AND BUILDING MATERIALS
- Influence of wood leachate industrial waste as a novel catalyst for the synthesis of UF resins and MDF bonded with them
- (2021) Ali Dorieh et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Reducing free formaldehyde emission, improvement of thickness swelling and increasing storage stability of novel medium density fiberboard by urea-formaldehyde adhesive modified by phenol derivatives
- (2021) Peyman Pouresmaeel Selakjani et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Biological durability of particleboard: fungicidal properties of Ag and Cu nanoparticles against Trametes versicolor white-rot fungus
- (2021) Mohammad Farajollah Pour et al. Wood Material Science & Engineering
- Utilization of phenol formaldehyde/Fe3O4 nanocomposite as microwave preheating amplifier in laminated veneer lumber (LVL) structure
- (2021) Mohammad Farajollah Pour et al. Journal of Building Engineering
- Addition of cellulose nanofibers extracted from rice straw to urea formaldehyde resin; effect on the adhesive characteristics and medium density fiberboard properties
- (2020) Amin Moslemi et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Synthesis of micro carbonaceous material by pyrolysis of rubber wood and its effect on properties of urea-formaldehyde (UF) resin
- (2020) Tanveer Ahmed Khan et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Converting crystalline thermosetting urea–formaldehyde resins to amorphous polymer using modified nanoclay
- (2020) Eko Setio Wibowo et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- The reduction of adhesive application in plywood manufacturing by using nanocellulose‐reinforced urea‐formaldehyde resin
- (2020) Jakub Kawalerczyk et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Are nickel- and titanium- doped fullerenes suitable adsorbents for dopamine in an aqueous solution? Detailed DFT and AIM studies
- (2020) Ali Shokuhi Rad et al. JOURNAL OF MOLECULAR LIQUIDS
- Preparation of isocyanate-free composite coating with controlled molecular architecture: A new convergent approach to functional macromolecules
- (2020) Mhd. Abd. Cader Mhd. Haniffa et al. PROGRESS IN ORGANIC COATINGS
- New insight into the use of latent catalysts for the synthesis of urea formaldehyde adhesives and the mechanical properties of medium density fiberboards bonded with them
- (2019) Ali Dorieh et al. EUROPEAN POLYMER JOURNAL
- Thermal decomposition kinetics of dynamically vulcanized polyamide 6-acrylonitrile butadiene rubber-halloysite nanotube nanocomposites
- (2019) Seyed Mohammad Reza Paran et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Technological performance of formaldehyde-free adhesive alternatives for particleboard industry
- (2019) Pia Solt et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Epoxy in nanotechnology: A short review
- (2019) Zahed Ahmadi PROGRESS IN ORGANIC COATINGS
- Urea Formaldehyde Resin Resultant Plywood with Rapid Formaldehyde Release Modified by Tunnel-Structured Sepiolite
- (2019) Li et al. Polymers
- Direct filtration procedure to attain antibacterial TFC membrane: A facile developing route of membrane surface properties and fouling resistance
- (2019) Atefe Soleymani Lashkenrai et al. CHEMICAL ENGINEERING RESEARCH & DESIGN
- Alumina nanoparticles as formaldehyde scavenger for urea-formaldehyde resin: Rheological and in-situ cure performance
- (2019) Pedro Henrique Gonzalez de Cademartori et al. COMPOSITES PART B-ENGINEERING
- An improved plastically dilatant unified viscoplastic constitutive formulation for multiscale analysis of polymer matrix composites under high strain rate loading
- (2019) Christopher Sorini et al. COMPOSITES PART B-ENGINEERING
- Bonding performance of melamine-urea–formaldehyde and phenol-resorcinol–formaldehyde adhesive glulams at elevated temperatures
- (2019) Jian Liu et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Solidification acceleration in a triplex-tube latent heat thermal energy storage system using V-shaped fin and nano-enhanced phase change material
- (2019) M. Alizadeh et al. APPLIED THERMAL ENGINEERING
- Foamed urea-formaldehyde microspheres for removal of heavy metals from aqueous solutions
- (2019) Ping Qu et al. CHEMOSPHERE
- Effect of the initial F/U molar ratio in urea-formaldehyde resins synthesis and its influence on the performance of medium density fiberboard bonded with them
- (2019) Mohsen Khonakdar Dazmiri et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- An investigation on the influence of aluminium oxide nano-additive and honge oil methyl ester on engine performance, combustion and emission characteristics
- (2019) Manzoore Elahi M. Soudagar et al. RENEWABLE ENERGY
- Reducing formaldehyde emission of urea formaldehyde-bonded particleboard by addition of amines as formaldehyde scavenger
- (2018) Aizat Ghani et al. BUILDING AND ENVIRONMENT
- Cellulose nanofiber board
- (2018) Hossein Yousefi et al. CARBOHYDRATE POLYMERS
- Environment-friendly urea-oxidized starch adhesive with zero formaldehyde-emission
- (2018) Xiang-fei Zhao et al. CARBOHYDRATE POLYMERS
- A review of extending performance of epoxy resins using carbon nanomaterials
- (2018) Shan Liu et al. COMPOSITES PART B-ENGINEERING
- High performance epoxy nanocomposite adhesive: Effect of nanofillers on adhesive strength, curing and degradation kinetics
- (2018) Ruchi Aradhana et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Novel Brassinosteroid-Modified Polyethylene Glycol Micelles for Controlled Release of Agrochemicals
- (2018) Javier Pérez Quiñones et al. JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
- “Greener” adhesives composed of urea-formaldehyde resin and cottonseed meal for wood-based composites
- (2018) Ming Liu et al. JOURNAL OF CLEANER PRODUCTION
- Hydrolysis and recycling of urea formaldehyde resin residues
- (2018) Ming Liu et al. JOURNAL OF HAZARDOUS MATERIALS
- Biocomposites based on cellulose and starch modified urea-formaldehyde resin: Hydrolytic, thermal, and radiation stability
- (2018) Vojislav Jovanović et al. POLYMER COMPOSITES
- Curing behavior of epoxy/Fe 3 O 4 nanocomposites: A comparison between the effects of bare Fe 3 O 4 , Fe 3 O 4 /SiO 2 /chitosan and Fe 3 O 4 /SiO 2 /chitosan/imide/phenylalanine-modified nanofillers
- (2018) Maryam Jouyandeh et al. PROGRESS IN ORGANIC COATINGS
- Reduction of formaldehyde emission from medium density fiberboard by chitosan as scavenger
- (2018) Hedi Hassannejad et al. The Journal of Adhesion
- DFT study of Ni, Cu, Cd and Ag heavy metal atom adsorption onto the surface of the zinc-oxide nanotube and zinc-oxide graphene-like structure
- (2018) A. Hamed Mashhadzadeh et al. MATERIALS CHEMISTRY AND PHYSICS
- Comparison of the properties of urea-formaldehyde resins by the use of formalin or urea formaldehyde condensates
- (2018) Ali Dorieh et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Application of surface chemical functionalized cellulose nanocrystals to improve the performance of UF adhesives used in wood based composites - MDF type
- (2018) Hossein Khanjanzadeh et al. CARBOHYDRATE POLYMERS
- Effect of microfibrillated cellulose addition on thermal properties of three grades of urea-formaldehyde resin
- (2017) Byung-Dae Park et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Modification of urea-formaldehyde resin adhesives with blocked isocyanates using sodium bisulfite
- (2017) Muhammad Adly Rahandi Lubis et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Preparation and Characterization of Bionanocomposites Based on Benzylated Wheat Straw and Nanoclay
- (2017) Meisam Jafari et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Preparation and characterization of spherical β-cyclodextrin/urea–formaldehyde microcapsules modified by nano-titanium oxide
- (2017) Xin Yu et al. RSC Advances
- The Dynamics of Deforestation in the Wet and Dry Tropics: A Comparison with Policy Implications
- (2017) Thomas K. Rudel Forests
- New Mechanism Proposed for the Base-Catalyzed Urea–Formaldehyde Condensation Reactions: A Theoretical Study
- (2017) Taohong Li et al. Polymers
- Strengthening of polysulfone membranes using hybrid mixtures of micro- and nano-scale modifiers
- (2017) Peyman P. Selakjani et al. Frontiers of Chemical Science and Engineering
- The effect of humidity on formaldehyde emission parameters of a medium-density fiberboard: Experimental observations and correlations
- (2016) Weihui Liang et al. BUILDING AND ENVIRONMENT
- Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose
- (2016) Nadir Ayrilmis et al. BUILDING AND ENVIRONMENT
- Morphology and mechanical properties of polyamide/clay nanocomposites toughened with NBR/NBR- g -GMA: A comparative study
- (2016) Ali Ebrahimi Jahromi et al. COMPOSITES PART B-ENGINEERING
- Optimization of processing parameters of medium density fiberboard using response surface methodology for multiwalled carbon nanotubes as a nanofiller
- (2016) Anuj Kumar et al. European Journal of Wood and Wood Products
- Thiolactone-based polymers for formaldehyde scavenging coatings
- (2016) Cristina Resetco et al. EUROPEAN POLYMER JOURNAL
- Mechanical, thermal, and morphological properties of nanoporous reinforced polysulfone membranes
- (2016) Peyman Pouresmaeel-Selkjani et al. HIGH PERFORMANCE POLYMERS
- Production of water tolerant melamine–urea–formaldehyde resin by incorporation of sodium metabisulphite
- (2016) Nádia T. Paiva et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- The effect of organofunctional nanosilica on the cross-linking process and thermal resistance of UF resin
- (2016) Dorota Dukarska et al. JOURNAL OF POLYMER RESEARCH
- Few-Layered Graphene-like Boron Nitride: A Highly Efficient Adsorbent for Indoor Formaldehyde Removal
- (2016) Jiawei Ye et al. Environmental Science & Technology Letters
- Investigating the Effect of Treated Rice Straw in PLLA/Starch Composite: Mechanical, Thermal, Rheological, and Morphological Study
- (2015) Seyed Mohammad Davachi et al. ADVANCES IN POLYMER TECHNOLOGY
- Effect of Melamine Allocation Proportion on Chemical Structures and Properties of Melamine-Urea-Formaldehyde Resins
- (2015) Jianlin Luo et al. BioResources
- Effect of addition of microfibrillated cellulose to urea-formaldehyde on selected adhesive characteristics and distribution in particle board
- (2015) Eike Mahrdt et al. CELLULOSE
- Effect of γ-irradiation on the hydrolytic stability and thermo-oxidative behavior of bio/inorganic modified urea–formaldehyde resins
- (2015) Branka Petković et al. COMPOSITES PART B-ENGINEERING
- Clove oil nanoemulsion as an effective antibacterial agent: Taguchi optimization method
- (2015) Mohammad Hassan Shahavi et al. Desalination and Water Treatment
- Thermal and mechanical properties of urea-formaldehyde (UF) resin combined with multiwalled carbon nanotubes (MWCNT) as nanofiller and fiberboards prepared by UF-MWCNT
- (2015) Anuj Kumar et al. HOLZFORSCHUNG
- Curing behavior of melamine-urea-formaldehyde (MUF) resin adhesive
- (2015) Hong Lei et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Environmental performance assessment of the melamine-urea-formaldehyde (MUF) resin manufacture: a case study in Brazil
- (2015) Diogo Aparecido Lopes Silva et al. JOURNAL OF CLEANER PRODUCTION
- The microcapsule-type formaldehyde scavenger: The preparation and the application in urea-formaldehyde adhesives
- (2015) Hongyun Duan et al. JOURNAL OF HAZARDOUS MATERIALS
- Competitive formation of the methylene and methylene ether bridges in the urea–formaldehyde reaction in alkaline solution: a combined experimental and theoretical study
- (2015) Taohong Li et al. WOOD SCIENCE AND TECHNOLOGY
- Evaluation of critical parameters for preparation of stable clove oil nanoemulsion
- (2015) Mohammad Hassan Shahavi et al. Arabian Journal of Chemistry
- Effect of γ-irradiation on the hydrolytic and thermal stability of micro- and nano-TiO2 based urea–formaldehyde composites
- (2015) V. Jovanović et al. RSC Advances
- Developing Environmentally Friendly Wood Composite Panels by Nanotechnology
- (2014) Zeki Candan et al. BioResources
- Influence of Aluminum Oxide Nanoparticles on the Physical and Mechanical Properties of Wood Composites
- (2014) Anuj Kumar et al. BioResources
- Measurement of formaldehyde and VOCs emissions from wood-based panels with nanomaterial-added melamine-impregnated paper
- (2014) Yu Liu et al. CONSTRUCTION AND BUILDING MATERIALS
- On-Line NMR Spectroscopic Reaction Kinetic Study of Urea–Formaldehyde Resin Synthesis
- (2014) Éléonore J. Kibrik et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Determination of polymer–nanoparticles interfacial adhesion and its role in shape memory behavior of shape memory polymer nanocomposites
- (2014) Yasser Zare INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Effect of lignin removal on mechanical, thermal, and morphological properties of polylactide/starch/rice husk blend used in food packaging
- (2014) Jamshid Mohammadi-Rovshandeh et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Performances of larch (larix gmelini) tannin modified urea-formaldehyde (TUF) resin and plywood bonded by TUF resin
- (2014) Jizhi Zhang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Synthesis, structure, and characterization of glyoxal-urea-formaldehyde cocondensed resins
- (2014) Shuduan Deng et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Performance and reaction mechanism of zero formaldehyde-emission urea-glyoxal (UG) resin
- (2014) Shuduan Deng et al. Journal of the Taiwan Institute of Chemical Engineers
- Measurement of some particleboard properties bonded with modified carboxymethyl starch of oil palm trunk
- (2014) Mohd Ezwan Selamat et al. MEASUREMENT
- Formaldehyde in the Ambient Atmosphere: From an Indoor Pollutant to an Outdoor Pollutant?
- (2013) Tunga Salthammer ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Investigation of hydrodynamic parameters in a novel expanded bed configuration: local axial dispersion characterization and an empirical correlation study
- (2013) E. S. Taheri et al. BRAZILIAN JOURNAL OF CHEMICAL ENGINEERING
- Characterization of new cellulose sansevieria ehrenbergii fibers for polymer composites
- (2013) T.P. Sathishkumar et al. COMPOSITE INTERFACES
- Mechanical properties of adhesives for bonding wood—A review
- (2013) Frank Stoeckel et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Scavengers for achieving zero formaldehyde emission of wood-based panels
- (2013) Nuno A. Costa et al. WOOD SCIENCE AND TECHNOLOGY
- Effect of using walnut/almond shells on the physical, mechanical properties and formaldehyde emission of particleboard
- (2012) Hamidreza Pirayesh et al. COMPOSITES PART B-ENGINEERING
- Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour–urea formaldehyde adhesive
- (2012) Amine Moubarik et al. COMPOSITES PART B-ENGINEERING
- Nanocrystalline cellulose (NCC): A renewable nano-material for polyvinyl acetate (PVA) adhesive
- (2012) Alireza Kaboorani et al. EUROPEAN POLYMER JOURNAL
- Development of epoxy/BN composites with high thermal conductivity and sufficient dielectric breakdown strength partI - sample preparations and thermal conductivity
- (2012) Zengbin Wang et al. IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION
- Improving some of applied properties of oriented strand board (OSB) made from underutilized low quality paulownia (Paulownia fortunie) wood employing nano-SiO2
- (2012) Ayoub Salari et al. INDUSTRIAL CROPS AND PRODUCTS
- Particulate reinforcement and formaldehyde adsorption of modified nanocrystalline cellulose in urea-formaldehyde resin adhesive
- (2012) Hao Zhang et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Preparation of porous, nano-sized urea–formaldehyde polymer powder
- (2012) Chul-Tae Lee JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- The effect of γ-irradiation on thermal behavior of composites based on nanosilica and 4-chloro-3-nitro-2H-chromen- 2-one-modified urea–formaldehyde
- (2012) Vojislav Jovanović et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds
- (2011) Stefan Veigel et al. CELLULOSE
- Nanocomposites based on silica-reinforced ethylene–propylene–diene–monomer/acrylonitrile–butadiene rubber blends
- (2011) Suzana Samaržija-Jovanović et al. COMPOSITES PART B-ENGINEERING
- The influence of moisture content of raw material on the physical and mechanical properties, surface roughness, wettability, and formaldehyde emission of particleboard composite
- (2011) Mehmet Baharoğlu et al. COMPOSITES PART B-ENGINEERING
- The efficiency of tannin as a formaldehyde scavenger chemical in medium density fiberboard
- (2011) Sevda Boran et al. COMPOSITES PART B-ENGINEERING
- The effect of Na+ montmorillonite (NaMMT) nanoclay on thermal properties of medium density fiberboard (MDF)
- (2011) Reza Zahedsheijani et al. European Journal of Wood and Wood Products
- Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin
- (2011) S. Boran et al. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES
- Production of melamine fortified urea-formaldehyde resins with low formaldehyde emission
- (2011) Nádia T. Paiva et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Comparison of UF synthesis by alkaline-acid and strongly acid processes
- (2011) João M. M. Ferra et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Synthesis, characterization and thermal analysis of urea–formaldehyde/nanoSiO2 resins
- (2011) E. Roumeli et al. THERMOCHIMICA ACTA
- Prediction of Thermal Decomposition Temperature of Polymers Using QSPR Methods
- (2010) BULLETIN OF THE KOREAN CHEMICAL SOCIETY
- Formaldehyde in the Indoor Environment
- (2010) Tunga Salthammer et al. CHEMICAL REVIEWS
- Synthesis of nanoparticles by microorganisms and their application in enhancing microbiological reaction rates
- (2010) Xiaolei Zhang et al. CHEMOSPHERE
- A study on the curing and viscoelastic characteristics of melamine–urea–formaldehyde resin in the presence of aluminium silicate nanoclays
- (2010) Xiaolin Cai et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- The role of alumina nanoparticles in epoxy adhesives
- (2010) Andrea Dorigato et al. JOURNAL OF NANOPARTICLE RESEARCH
- Thermal behavior of modified urea–formaldehyde resins
- (2010) Suzana Samaržija-Jovanović et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Association between indoor exposure to semi-volatile organic compounds and building-related symptoms among the occupants of residential dwellings
- (2009) A. Kanazawa et al. INDOOR AIR
- Effects of Nanoclay as a Reinforcement Filler on the Physical and Mechanical Properties of Wood-based Composite
- (2009) Alireza Ashori et al. JOURNAL OF COMPOSITE MATERIALS
- Thermal behaviour of melamine-modified urea–formaldehyde resins
- (2009) Kadri Siimer et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- The impact of the nature of nanofillers on the performance of wood polymer nanocomposites
- (2008) Xiaolin Cai et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- An update on sick building syndrome
- (2008) Dan Norbäck Current Opinion in Allergy and Clinical Immunology
- Evaluating building-related symptoms using the US EPA BASE study results
- (2008) H. S. Brightman et al. INDOOR AIR
- Dynamic mechanical analysis of urea–formaldehyde resin adhesives with different formaldehyde-to-urea molar ratios
- (2008) Byung-Dae Park et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Thermal and dynamic mechanical behavior of bionanocomposites: Fumed silica nanoparticles dispersed in poly(vinyl pyrrolidone), chitosan, and poly(vinyl alcohol)
- (2008) Konstantinos Chrissafis et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Influence of nanoclay on urea-formaldehyde resins for wood adhesives and its model
- (2008) Hong Lei et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Nanofiller-reinforced polymer nanocomposites
- (2008) J. Njuguna et al. POLYMERS FOR ADVANCED TECHNOLOGIES
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started