Energy recovery from high density polyethylene plastic via pyrolysis with upgrading of the product by a novel nano MIL-53 (Cu) derived@Y zeolite catalyst using response surface methodology

TECHNO-ECONOMIC ASSESSMENT OF CO-GASIFICATION OF RICE HUSK AND PLASTIC WASTE AS OFF-GRID POWER SOURCE FOR SMALL SCALE RICE MILLING IN NIGERIA-AN ASPEN PLUS MODEL

(2021) Jamilu Salisu et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Investigation of smart water imbibition assisted with microwave radiation as a novel hybrid method of enhanced oil recovery

(2021) Saeed Karami et al.   JOURNAL OF MOLECULAR LIQUIDS

Modified nickel-based catalysts for improved steam reforming of biomass tar: A critical review

(2021) Ningbo Gao et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Co-pyrolysis of biomass and waste tires under high-pressure two-stage fixed bed reactor

(2021) Fengchao Wang et al.   BIORESOURCE TECHNOLOGY

Catalytic steam reforming of real tar under high-efficiency Ni/USY catalyst for H2 production

(2021) Ningbo Gao et al.   FUEL

Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming

(2021) Maria Cortazar et al.   FUEL PROCESSING TECHNOLOGY

Experimental investigation for the thermal management of a coaxial electrical cable system using a form-stable low temperature phase change material

(2021) Mahdi Jafaripour et al.   Journal of Energy Storage

Preparation and characterization of high temperature shape stable NaNO3/diatomite phase change materials with nanoparticles for solar energy storage applications

(2021) Sajad Soleimanpour et al.   Journal of Energy Storage

Product distribution from oil sludge and waste tires under high pressure pyrolysis

(2021) Fengchao Wang et al.   FUEL

Pyrolysis of Plastic Waste: Opportunities and Challenges

(2020) Anja Oasmaa et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Realizing the Potential High Benefits of Circular Economy in the Chemical Industry: Ethylene Monomer Recovery via Polyethylene Pyrolysis

(2020) Ana Somoza-Tornos et al.   ACS Sustainable Chemistry & Engineering

A Bottom‐Up Strategy for the Synthesis of Highly Siliceous Faujasite‐Type Zeolite

(2020) Dali Zhu et al.   ADVANCED MATERIALS

Pyrolysis of low-density polyethylene waste plastics using mixtures of catalysts

(2020) Aya Soliman et al.   Journal of Material Cycles and Waste Management

Production of renewable aromatics and heterocycles by catalytic pyrolysis of biomass resources using rhenium and tin promoted ZSM-5 zeolite catalysts

(2020) Shahin Shahsavari et al.   PROCESS SAFETY AND ENVIRONMENTAL PROTECTION

Facile fabrication of novel analcime/sodium aluminum silicate hydrate and zeolite Y/faujasite mesoporous nanocomposites for efficient removal of Cu(II) and Pb(II) ions from aqueous media

(2020) Ehab A. Abdelrahman et al.   Journal of Materials Research and Technology-JMR&T

Optimization of energy consumption and temperature fluctuations for a household freezer using non‐toxic and non‐flammable eutectic phase change materials with a cascade arrangement

(2020) Anahita Pirvaram et al.   INTERNATIONAL JOURNAL OF ENERGY RESEARCH

Role of hydrochloric acid treated HZSM-5 zeolite in Sm2Ti2O7/nHZSM-5 composite for photocatalytic degradation of ofloxacin

(2020) Lili Yang et al.   Journal of Materials Research and Technology-JMR&T

Fabrication and optimization of kaolin/stearic acid composite as a form-stable phase change material for application in the thermal energy storage systems

(2020) M. Jafaripour et al.   Journal of Energy Storage

Energy management of a household refrigerator using eutectic environmental friendly PCMs in a cascaded condition

(2019) A. Pirvaram et al.   ENERGY

Modification of acidic and textural properties of a sulphated zirconia catalyst for efficient conversion of high-density polyethylene into liquid fuel

(2019) Muhammad N. Almustapha et al.   ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH

Microwave vacuum pyrolysis of waste plastic and used cooking oil for simultaneous waste reduction and sustainable energy conversion: Recovery of cleaner liquid fuel and techno-economic analysis

(2019) Su Shiung Lam et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

4-Lump kinetic model of the co-pyrolysis of LDPE and a heavy petroleum fraction

(2019) Teresa Schubert et al.   FUEL

Application of environmental friendly and eutectic phase change materials for the efficiency enhancement of household freezers

(2019) L. Abdolmaleki et al.   RENEWABLE ENERGY

Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET—Part I: Production and physical properties

(2018) Stanislav Honus et al.   FUEL

Gasoline and diesel-like fuel production by continuous catalytic pyrolysis of waste polyethylene and polypropylene mixtures over USY zeolite

(2018) Chantal Kassargy et al.   FUEL

Valorization of packaging plastic waste by slow pyrolysis

(2018) Pallab Das et al.   RESOURCES CONSERVATION AND RECYCLING

Production of value-added liquid fuel via microwave co-pyrolysis of used frying oil and plastic waste

(2018) Wan Adibah Wan Mahari et al.   ENERGY

Catalytic Pyrolysis of Waste Polyethylene into Aromatics by H3PO4-Activated Carbon

(2018) Kai Sun et al.   ENERGY & FUELS

Characteristics of a new type continuous two-stage pyrolysis of waste polyethylene

(2018) Ki-Bum Park et al.   ENERGY

Comparative study of two weir type cascade solar stills with and without PCM storage using energy and exergy analysis

(2017) Faramarz Sarhaddi et al.   ENERGY CONVERSION AND MANAGEMENT

Thermodynamic analysis of carbon dioxide reforming of methane to syngas with statistical methods

(2017) Hossein Atashi et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Thermodynamic modeling and optimization of thermolysis and air gasification of waste tire

(2017) Alireza Mozafari et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Improvement of renewable transportation fuel properties by deoxygenation process using thermal and catalytic cracking of triglycerides and their methyl esters

(2016) H. Seifi et al.   APPLIED THERMAL ENGINEERING

Synthesis and characterization of mesoporous zeolite Y by using block copolymers as templates

(2016) Jun Zhao et al.   CHEMICAL ENGINEERING JOURNAL

Thermal/catalytic cracking of liquid hydrocarbons for the production of olefins: A state-of-the-art review II: Catalytic cracking review

(2016) S.M. Sadrameli   FUEL

Bound cleavage at carboxyl group-glycerol backbone position in thermal cracking of the triglycerides in sunflower oil

(2016) H. Seifi et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Mathematical models for the simulation of thermal regenerators: A state-of-the-art review

(2016) S.M. Sadrameli   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Surface polarization enhancement: high catalytic performance of Cu/CuOx/C nanocomposites derived from Cu-BTC for CO oxidation

(2016) Ruirui Zhang et al.   Journal of Materials Chemistry A

Thermodynamic analysis of steam reforming of methane with statistical approaches

(2015) Farshad Farshchi Tabrizi et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal/catalytic cracking of hydrocarbons for the production of olefins: A state-of-the-art review I: Thermal cracking review

(2015) S.M. Sadrameli   FUEL

Effects of operating conditions on selectivity of Fe–Co–Mn/MgO at high temperature CO hydrogenation

(2015) Hossein Atashi et al.   Journal of the Taiwan Institute of Chemical Engineers

Development of a macro-micro kinetic model for CO hydrogenation over Co–Ni catalyst

(2015) M. Shiva et al.   KINETICS AND CATALYSIS

Catalytic Degradation of High-Density Polyethylene over a Clay Catalyst Compared with Other Catalysts

(2014) Mi Liu et al.   ENERGY & FUELS

Study of high density polyethylene (HDPE) pyrolysis with reactive molecular dynamics

(2014) Xiaolong Liu et al.   POLYMER DEGRADATION AND STABILITY

Co-pyrolysis of petroleum based waste HDPE, poly-lactic-acid biopolymer and organic waste

(2013) N. Miskolczi   JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY