Surface modification of UHMWPE fibers by ozone treatment and UV grafting for adhesion improvement

Electric field induced activated carbon fiber (ACF) cathode transition from an initiator/a promoter into an electrocatalyst in ozonation process

(2016) Xianke Zhang et al.   CHEMICAL ENGINEERING JOURNAL

Polyamide 6 surface layer following ozone treatment

(2016) Mariusz Kłonica et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Study on the dual-curing mechanism of epoxy/allyl compound/sulfur system

(2016) Qingsong Lian et al.   JOURNAL OF MATERIALS SCIENCE

Effect of plasma surface treatment of recycled carbon fiber on carbon fiber-reinforced plastics (CFRP) interfacial properties

(2015) Hooseok Lee et al.   APPLIED SURFACE SCIENCE

The reinforcement ability of ozone-treated CNFs on mechanical properties of C–epoxy composites

(2015) K. Krushnamurty et al.   COMPOSITE INTERFACES

Surface functionalization and structure characterizations of nanodiamond and its epoxy based nanocomposites

(2015) Yasir A. Haleem et al.   COMPOSITES PART B-ENGINEERING

Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase

(2015) Wenzhen Qin et al.   COMPOSITES PART B-ENGINEERING

Catechol and epoxy functionalized ultrahigh molecular weight polyethylene (UHMWPE) fibers with improved surface activity and interfacial adhesion

(2015) Rina Sa et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Preparation and characterization of PVDF-glass fiber composite membrane reinforced by interfacial UV-grafting copolymerization

(2015) Nan Luo et al.   JOURNAL OF ENVIRONMENTAL SCIENCES

Surface Modification of Aramid Fibers by Bio-Inspired Poly(dopamine) and Epoxy Functionalized Silane Grafting

(2014) Rina Sa et al.   ACS Applied Materials & Interfaces

Investigation of Physico-Chemical Properties of Alkali-TreatedProsopis julifloraFibers

(2014) S. S. Saravanakumar et al.   INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION

Fabrication of the carbon paper by wet-laying of ozone-treated carbon fibers with hydrophilic functional groups

(2013) Hyunuk Kim et al.   CARBON

The effect of interfacial adhesion on the creep behaviour of LDPE–Al–Fique composite materials

(2013) Miguel A. Hidalgo-Salazar et al.   COMPOSITES PART B-ENGINEERING

The influence of the short-term ultraviolet radiation on the structure and properties of poly(p-phenylene terephthalaramide) fibers

(2012) Shineng Li et al.   APPLIED SURFACE SCIENCE

The effects of alkali–silane treatment on the tensile and flexural properties of short fibre non-woven kenaf reinforced polypropylene composites

(2012) O.M.L. Asumani et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

UV radiation inducing succinic acid/silica–kaolinite network on cellulose fiber to improve the functionality

(2012) Mazeyar Parvinzadeh Gashti et al.   COMPOSITES PART B-ENGINEERING

Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials

(2012) Ebru Bozaci et al.   COMPOSITES PART B-ENGINEERING

Gamma radiation-induced grafting of glycidyl methacrylate (GMA) onto water hyacinth fibers

(2012) Jordan F. Madrid et al.   RADIATION PHYSICS AND CHEMISTRY

Study on curing kinetics of diallyl-bearing epoxy resin using sulfur as curing agent

(2012) Guangpu Zhang et al.   THERMOCHIMICA ACTA

Surface modification of ultra high molecular weight polyethylene fibers via the sequential photoinduced graft polymerization

(2011) Zhi Li et al.   APPLIED SURFACE SCIENCE

Effect of an ultraviolet/ozone treatment on the surface texture and functional groups on polyacrylonitrile carbon fibres

(2011) S. Osbeck et al.   CARBON

Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites

(2011) Tran Huu Nam et al.   COMPOSITES PART B-ENGINEERING

Effect of ozone and ultrasound on the fiber properties of angora rabbit

(2011) S. Perincek et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Improvement of adhesion properties of polypropylene substrates by methyl methacrylate UV photografting surface treatment

(2011) J. Balart et al.   MATERIALS & DESIGN

Effect of gamma irradiation on the optical properties of UHMWPE (Ultra-high-molecular-weight-polyethylene) polymer

(2011) S.K. Raghuvanshi et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS

Epoxy/graphene platelets nanocomposites with two levels of interface strength

(2011) Izzuddin Zaman et al.   POLYMER

The effect of polypyrrole coatings on the adhesion and structure properties of UHMWPE fiber

(2011) Xin Jin et al.   SYNTHETIC METALS

Surface modification of ultra-high molecular weight polyethylene (UHMWPE) by argon plasma

(2010) Hengjun Liu et al.   APPLIED SURFACE SCIENCE

Production of a cellular structure in carbon nanotube/natural rubber composites revealed by nanomechanical mapping

(2010) Dong Wang et al.   CARBON

Process optimization of melt spinning and mechanical strength enhancement of functionalized multi-walled carbon nanotubes reinforcing polyethylene fibers

(2010) Abu Bakar Sulong et al.   COMPOSITES PART B-ENGINEERING

UV-induced graft polymerization of acrylamide on cellulose by using immobilized benzophenone as a photo-initiator

(2009) Kyung Hwa Hong et al.   EUROPEAN POLYMER JOURNAL

Developments and new applications of UV-induced surface graft polymerizations

(2008) J DENG et al.   PROGRESS IN POLYMER SCIENCE

Homocomposites of chopped fluorinated polyethylene fiber with low-density polyethylene matrix

(2007) J. Maity et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING