Cracking of plastic pyrolysis oil over FCC equilibrium catalysts to produce fuels: Kinetic modeling

Waste Refinery: The Valorization of Waste Plastics and End-of-Life Tires in Refinery Units. A Review

(2021) Roberto Palos et al.   ENERGY & FUELS

Pyrolysis of plastic wastes in a fountain confined conical spouted bed reactor: Determination of stable operating conditions

(2021) Santiago Orozco et al.   ENERGY CONVERSION AND MANAGEMENT

Coke deactivation and regeneration of HZSM-5 zeolite catalysts in the oligomerization of 1-butene

(2021) Marta Díaz et al.   APPLIED CATALYSIS B-ENVIRONMENTAL

Different approaches to convert waste polyolefins into automotive fuels via hydrocracking with a NiW/HY catalyst

(2021) Francisco J. Vela et al.   FUEL PROCESSING TECHNOLOGY

Fischer-Tropsch wax catalytic cracking for the production of low olefin and high octane number gasoline: Experiment and molecular level kinetic modeling study

(2021) Mei Yang et al.   FUEL

Kinetic modeling for the catalytic cracking of tires pyrolysis oil

(2021) Roberto Palos et al.   FUEL

Towards waste refinery: Co-feeding HDPE pyrolysis waxes with VGO into the catalytic cracking unit

(2020) Elena Rodríguez et al.   ENERGY CONVERSION AND MANAGEMENT

Molecular Modeling of Coprocessing Biomass Fast Pyrolysis Oil in Fluid Catalytic Cracking Unit

(2020) Mohamed Al Jamri et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Pyrolysis of Plastic Waste: Opportunities and Challenges

(2020) Anja Oasmaa et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Characterization and Distillation of Pyrolysis Liquids Coming from Polyolefins Segregated of MSW for Their Use as Automotive Diesel Fuel

(2020) Alberto Gala et al.   ENERGY & FUELS

Upgrading of heavy coker naphtha by means of catalytic cracking in refinery FCC unit

(2020) Roberto Palos et al.   FUEL PROCESSING TECHNOLOGY

A study on the lumped kinetic modeling method for fluid catalytic cracking

(2020) Xiaojing Zhao et al.   CHEMICAL ENGINEERING & TECHNOLOGY

Converting the Surplus of Low-Quality Naphtha into More Valuable Products by Feeding It to a Fluid Catalytic Cracking Unit

(2020) Roberto Palos et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Production of Non-Conventional Fuels by Catalytic Cracking of Scrap Tires Pyrolysis Oil

(2019) Elena Rodríguez et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Effect of the FCC equilibrium catalyst properties and of the cracking temperature on the production of fuel from HDPE pyrolysis waxes

(2019) Elena Rodríguez et al.   ENERGY & FUELS

Kinetic Modeling of Hydrotreating for Enhanced Upgrading of Light Cycle Oil

(2019) Roberto Palos et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Fuel production by cracking of polyolefins pyrolysis waxes under fluid catalytic cracking (FCC) operating conditions

(2019) Elena Rodríguez et al.   WASTE MANAGEMENT

Thermal and catalytic cracking of whole crude oils at high severity

(2019) Akram A. Al-Absi et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Increasing the economic efficiency of gasoline production: Reducing the quality giveaway and simulation of catalytic cracking and compounding

(2019) Vyacheslav Chuzlov et al.   FUEL PROCESSING TECHNOLOGY

Simultaneous modeling of the kinetics for n-pentane cracking and the deactivation of a HZSM-5 based catalyst

(2018) Tomás Cordero-Lanzac et al.   CHEMICAL ENGINEERING JOURNAL

8-Lump kinetic model for fluid catalytic cracking with olefin detailed distribution study

(2018) A. Golrokh Sani et al.   FUEL

Nine-lumped kinetic model for VGO catalytic cracking; using catalyst deactivation

(2018) Ali Afshar Ebrahimi et al.   FUEL

Reverse engineering of plastic waste into useful fuel products

(2018) Prosper Achaw Owusu et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Vanadium and nickel deposition on FCC catalyst: Influence of residual catalyst acidity on catalytic products

(2018) U.J. Etim et al.   MICROPOROUS AND MESOPOROUS MATERIALS

Insight into the deactivation and regeneration of HZSM-5 zeolite catalysts in the conversion of dimethyl ether to olefins

(2018) Tomás Cordero-Lanzac et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Parameter estimation of a six-lump kinetic model of an industrial fluid catalytic cracking unit

(2018) Yakubu M. John et al.   FUEL

Catalytic Thermal Cracking of Postconsumer Waste Plastics to Fuels. 2. Pilot-Scale Thermochemical Conversion

(2017) Bidhya Kunwar et al.   ENERGY & FUELS

Application of rare earths in fluid catalytic cracking: A review

(2017) Aaron Akah   JOURNAL OF RARE EARTHS

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

(2017) Gartzen Lopez et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Nature and Location of Carbonaceous Species in a Composite HZSM-5 Zeolite Catalyst during the Conversion of Dimethyl Ether into Light Olefins

(2017) et al.   Catalysts

Synthesis of Wool-Ball-Like ZSM-5 with Enlarged External Surfaces and Improved Diffusion: A Potential Highly-Efficient FCC Catalyst Component for Elevating Pre-cracking of Large Molecules and Catalytic Longevity

(2016) Jiajun Zheng et al.   CATALYSIS LETTERS

Synergy in the Cracking of a Blend of Bio-oil and Vacuum Gasoil under Fluid Catalytic Cracking Conditions

(2016) Álvaro Ibarra et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Fluid catalytic cracking: recent developments on the grand old lady of zeolite catalysis

(2015) E. T. C. Vogt et al.   CHEMICAL SOCIETY REVIEWS

Current state and future prospects of plastic waste as source of fuel: A review

(2015) S.L. Wong et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Styrene recovery from polystyrene by flash pyrolysis in a conical spouted bed reactor

(2015) Maite Artetxe et al.   WASTE MANAGEMENT

A systematic methodology for kinetic modeling of chemical reactions applied ton-hexane hydroisomerization

(2014) Kenneth Toch et al.   AICHE JOURNAL

Eight-Lump Kinetic Modeling of Vacuum Residue Catalytic Cracking in an Independent Fluid Bed Reactor

(2014) Haohua Gao et al.   ENERGY & FUELS

Catalyst activity decay due to pore blockage during catalytic cracking of hydrocarbons

(2012) Gladys Jiménez-García et al.   FUEL

Effect of the acidity of the HZSM-5 zeolite catalyst on the cracking of high density polyethylene in a conical spouted bed reactor

(2011) G. Elordi et al.   APPLIED CATALYSIS A-GENERAL

Characterization of the waxes obtained by the pyrolysis of polyolefin plastics in a conical spouted bed reactor

(2011) M. Arabiourrutia et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Recycling poly-(methyl methacrylate) by pyrolysis in a conical spouted bed reactor

(2010) Gartzen Lopez et al.   CHEMICAL ENGINEERING AND PROCESSING

H-ZSM-11 and Zn-ZSM-11 zeolites and their applications in the catalytic transformation of LDPE

(2009) María S. Renzini et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Heterogeneous Approach to the Catalytic Cracking of Vacuum Gas Oil

(2008) Mustafa Al-Sabawi et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Tracking Catalyst Activity during Fluidized-bed Catalytic Cracking

(2008) Gladys Jiménez-García et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Catalytic pyrolysis of HDPE in continuous mode over zeolite catalysts in a conical spouted bed reactor

(2008) G. Elordi et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Deactivation of FCC catalysts

(2008) H.S. Cerqueira et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL

Prevention of zeolite deactivation by coking

(2008) Michel Guisnet et al.   JOURNAL OF MOLECULAR CATALYSIS A-CHEMICAL