On crashworthiness behaviors of 3D printed multi-cell filled thin-walled structures

Experimental studies on quasi-static axial crushing of additively-manufactured PLA random honeycomb-filled double circular tubes

(2021) Shilong Wang et al.   COMPOSITE STRUCTURES

Simultaneous reinforcement of both rigidity and energy absorption of polyamide-based composites with hybrid continuous fibers by 3D printing

(2021) Kui Wang et al.   COMPOSITE STRUCTURES

Compressive behaviors of 3D printed polypropylene-based composites at low and high strain rates

(2021) Kui Wang et al.   POLYMER TESTING

Comparative study on metal/CFRP hybrid structures under static and dynamic loading

(2020) Guohua Zhu et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

A Novel Theoretical Approach for Estimation of Axial Crushing Behavior of Polygonal Hollow Sections

(2020) Ahmad Malekshahi et al.   International Journal of Applied Mechanics

Improving the energy absorption capacity of square CFRP tubes with cutout by introducing chamfer

(2020) Zhibo Song et al.   INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES

Theoretical estimation of axial crushing behavior of multicell hollow sections

(2020) Ahmad Malekshahi et al.   MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES

Effects of Scanning Strategy and Printing Temperature on the Compressive Behaviors of 3D Printed Polyamide-Based Composites

(2020) Jin Wang et al.   Polymers

Experimental study on the crashworthiness of bio-inspired aluminum foam-filled tubes under axial compression loading

(2020) Jiafeng Song et al.   THIN-WALLED STRUCTURES

Static and dynamic axial crushing of Al/CRFP hybrid tubes with single-cell and multi-cell sections

(2019) Zhixin Huang et al.   COMPOSITE STRUCTURES

Static and dynamic axial crushing of self-locking multi-cell tubes

(2019) Xiong Zhang et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Experimental analysis of additively manufactured thin-walled heat-treated circular tubes with slits using AlSi10Mg alloy by quasi-static axial crushing test

(2019) Ahmed S. Mohamed et al.   THIN-WALLED STRUCTURES

Effect of fibre architecture on the specific energy absorption in carbon epoxy composite tubes under progressive crushing

(2019) Grażyna Ryzińska et al.   COMPOSITE STRUCTURES

Crashworthiness analysis and design of composite tapered tubes under multiple load cases

(2019) Xuan Zhao et al.   COMPOSITE STRUCTURES

Theoretical analysis and crashworthiness optimization of hybrid multi-cell structures

(2019) Tengteng Chen et al.   THIN-WALLED STRUCTURES

Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression

(2019) Yong Tao et al.   COMPOSITES PART B-ENGINEERING

Energy absorption mechanism of axially-varying thickness (AVT) multicell thin-walled structures under out-of-plane loading

(2019) Tong Pang et al.   ENGINEERING STRUCTURES

Effect of environment on mechanical properties of 3D printed polylactide for biomedical applications

(2019) Amirpasha Moetazedian et al.   Journal of the Mechanical Behavior of Biomedical Materials

How does bio-inspired graded honeycomb filler affect energy absorption characteristics?

(2019) Yuze Nian et al.   THIN-WALLED STRUCTURES

Crashworthiness analysis and bionic design of multi-cell tubes under axial and oblique impact loads

(2019) Han Huang et al.   THIN-WALLED STRUCTURES

Topological design of multi-cell hexagonal tubes under axial and lateral loading cases using a modified particle swarm algorithm

(2018) Na Qiu et al.   APPLIED MATHEMATICAL MODELLING

Crashworthiness design of novel hierarchical hexagonal columns

(2018) Xiang Xu et al.   COMPOSITE STRUCTURES

On folding mechanics of multi-cell thin-walled square tubes

(2018) Zhonggang Wang et al.   COMPOSITES PART B-ENGINEERING

Crashworthiness optimal design of multi-cell triangular tubes under axial and oblique impact loading

(2018) TrongNhan Tran et al.   ENGINEERING FAILURE ANALYSIS

Experimental study on the crush behavior and energy-absorption ability of circular magnesium thin-walled tubes and the comparison with aluminum tubes

(2018) Zhigang Li et al.   ENGINEERING STRUCTURES

Topological configuration analysis and design for foam filled multi-cell tubes

(2018) Guangyong Sun et al.   ENGINEERING STRUCTURES

Crashworthiness design for bio-inspired multi-cell tubes with quadrilateral, hexagonal and octagonal sections

(2018) Linwei Zhang et al.   THIN-WALLED STRUCTURES

Comparative analysis of crashworthiness of empty and foam-filled thin-walled tubes

(2018) Zhibin Li et al.   THIN-WALLED STRUCTURES

Experimental and theoretical study on crashworthiness of star-shaped tubes under axial compression

(2018) Xiaolin Deng et al.   THIN-WALLED STRUCTURES

Crashworthiness of bionic fractal hierarchical structures

(2018) Yong Zhang et al.   MATERIALS & DESIGN

Crushing behavior of a thin-walled circular tube with internal gradient grooves fabricated by SLM 3D printing

(2017) Zhe Yang et al.   THIN-WALLED STRUCTURES

Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes

(2016) Guangyong Sun et al.   COMPOSITE STRUCTURES

Axial crushing of triaxially braided composite tubes at quasi-static and dynamic rates

(2016) Carla McGregor et al.   COMPOSITE STRUCTURES

Effect of fiber orientation on energy absorption characteristics of glass cloth/epoxy composite tubes under axial quasi-static and impact crushing condition

(2016) Dayong Hu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Novel approach for design of 3D-multi-cell thin-walled circular tube to improve the energy absorption characteristics under axial impact loading

(2016) M. S. Zahran et al.   INTERNATIONAL JOURNAL OF CRASHWORTHINESS

On design of graded honeycomb filler and tubal wall thickness for multiple load cases

(2016) Guohua Zhu et al.   THIN-WALLED STRUCTURES

Theoretical prediction and optimization of multi-cell hexagonal tubes under axial crashing

(2016) Na Qiu et al.   THIN-WALLED STRUCTURES

Crushing behavior of new designed multi-cell members subjected to axial and oblique quasi-static loads

(2016) S. Pirmohammad et al.   THIN-WALLED STRUCTURES

Axial energy absorption of CFRP truncated cones

(2015) S. Boria et al.   COMPOSITE STRUCTURES

Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases

(2015) Na Qiu et al.   FINITE ELEMENTS IN ANALYSIS AND DESIGN

Design of thin wall structures for energy absorption applications: Enhancement of crashworthiness due to axial and oblique impact forces

(2013) F. Tarlochan et al.   THIN-WALLED STRUCTURES

An investigation on the energy absorption characteristics of multi-cell square tubes

(2013) A. Alavi Nia et al.   THIN-WALLED STRUCTURES

Comparative analysis of energy absorption capacity of simple and multi-cell thin-walled tubes with triangular, square, hexagonal and octagonal sections

(2013) A. Alavi Nia et al.   THIN-WALLED STRUCTURES

Lightweight design of carbon twill weave fabric composite body structure for electric vehicle

(2012) Qiang Liu et al.   COMPOSITE STRUCTURES

Quasi-static axial compression of thin-walled tubes with different cross-sectional shapes

(2011) Z. Fan et al.   ENGINEERING STRUCTURES

Comparative analysis of energy absorption and deformations of thin walled tubes with various section geometries

(2010) Ali Alavi Nia et al.   THIN-WALLED STRUCTURES

Crush energy absorption of composite channel section specimens

(2009) Paolo Feraboli et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Design and development of thermoplastic composite roof door for mass transit bus

(2008) Haibin Ning et al.   MATERIALS & DESIGN