Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing

3D pore structure characterization and hardness in a powder bed fusion-processed fully amorphous Zr-based bulk metallic glass

(2020) Jianye Shi et al.   MATERIALS CHARACTERIZATION

Premature failure of an additively manufactured material

(2020) Zhi Wang et al.   NPG Asia Materials

Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment

(2020) Tobias Ronneberg et al.   MATERIALS & DESIGN

Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants

(2019) Hongjun Zhang et al.   SCRIPTA MATERIALIA

Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718

(2019) Changhao Pei et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Methods for Rapid Pore Classification in Metal Additive Manufacturing

(2019) Robert Snell et al.   JOM

Improved plasticity of Inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process

(2019) X. Li et al.   MATERIALS & DESIGN

Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights

(2019) Anton du Plessis et al.   MATERIALS & DESIGN

A damage evolution model based on micro-structural characteristics for an additive manufactured superalloy under monotonic and cyclic loading conditions

(2019) Changhao Pei et al.   INTERNATIONAL JOURNAL OF FATIGUE

Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion

(2018) Fan Zhang et al.   ACTA MATERIALIA

Cyclic deformation behavior of a damage tolerant CrMnNi TRIP steel produced by electron beam melting

(2018) M. Droste et al.   INTERNATIONAL JOURNAL OF FATIGUE

Effect of heat treatment on microstructure evolution of Inconel 718 alloy fabricated by selective laser melting

(2018) Xing Li et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Grain boundary network evolution in Inconel 718 from selective laser melting to heat treatment

(2018) Sharniece Holland et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Correlation of mechanical properties to microstructure in Inconel 718 fabricated by Direct Metal Laser Sintering

(2018) Bryton Farber et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction

(2018) Claire Bruna-Rosso et al.   MATERIALS & DESIGN

Solution Treatment Study of Inconel 718 Produced by SLM Additive Technique in View of the Oxidation Resistance

(2018) Michele Calandri et al.   ADVANCED ENGINEERING MATERIALS

Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing

(2018) Hiroshige Masuo et al.   INTERNATIONAL JOURNAL OF FATIGUE

Cyclic Plasticity Modeling of Nickel-Based Superalloy Inconel 718 under Multi-Axial Thermo-Mechanical Fatigue Loading Conditions

(2018) Jingyu Sun et al.   INTERNATIONAL JOURNAL OF FATIGUE

A Review on the Fatigue Behavior of Ti-6Al-4V Fabricated by Electron Beam Melting Additive Manufacturing

(2018) Andrew H. Chern et al.   INTERNATIONAL JOURNAL OF FATIGUE

Characterization of SLM-fabricated Inconel 718 after solid solution and precipitation hardening heat treatments

(2018) Wakshum M. Tucho et al.   JOURNAL OF MATERIALS SCIENCE

Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718

(2018) Arun Ramanathan Balachandramurthi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Damage modeling of metallic alloys made by additive manufacturing

(2018) Mohsen Taheri Andani et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel

(2017) Aref Yadollahi et al.   INTERNATIONAL JOURNAL OF FATIGUE

In-situ observation on twin boundary evolution and crack initiation behavior during tensile test on 316L austenitic stainless steel

(2017) Wei Wang et al.   MATERIALS CHARACTERIZATION

Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing

(2017) Mang Ni et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A continuum damage model for multi-axial low cycle fatigue of porous sintered metals based on the critical plane concept

(2017) Songyun Ma et al.   MECHANICS OF MATERIALS

Investigation on dislocation-based mechanisms of void growth and coalescence in single crystal and nanotwinned nickels by molecular dynamics simulation

(2017) Yanqiu Zhang et al.   PHILOSOPHICAL MAGAZINE

Additive manufacturing: Toward holistic design

(2017) Bradley H. Jared et al.   SCRIPTA MATERIALIA

Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing

(2017) Yen-Ling Kuo et al.   SCRIPTA MATERIALIA

Metal Additive Manufacturing: A Review of Mechanical Properties

(2016) John J. Lewandowski et al.   Annual Review of Materials Research

Damage evolution and failure mechanisms in additively manufactured stainless steel

(2016) Holly D. Carlton et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical behavior of additive manufactured, powder-bed laser-fused materials

(2016) Todd M. Mower et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical and Microstructural Investigation of Nickel-Based Superalloy IN718 Manufactured by Selective Laser Melting (SLM)

(2015) Johannes Strößner et al.   ADVANCED ENGINEERING MATERIALS

Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys

(2015) Erik R. Denlinger et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting

(2015) Shafaqat Siddique et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Computed tomography for characterization of fatigue performance of selective laser melted parts

(2015) Shafaqat Siddique et al.   MATERIALS & DESIGN

Fatigue crack initiation, slip localization and twin boundaries in a nickel-based superalloy

(2014) Clayton A. Stein et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Continuum damage mechanics for sintered powder metals

(2014) Huang Yuan et al.   Science China-Physics Mechanics & Astronomy

Damage evolution and modeling of sintered metals under multi-axial loading conditions

(2013) Songyun Ma et al.   COMPUTATIONAL MATERIALS SCIENCE

Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting

(2012) K.N. Amato et al.   ACTA MATERIALIA

Laser additive manufacturing of metallic components: materials, processes and mechanisms

(2012) D D Gu et al.   INTERNATIONAL MATERIALS REVIEWS

Texture control during laser deposition of nickel-based superalloy

(2012) G.P. Dinda et al.   SCRIPTA MATERIALIA

The microstructure and mechanical properties of deposited-IN718 by selective laser melting

(2011) Zemin Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Crystallographic fatigue crack initiation in nickel-based superalloy René 88DT at elevated temperature

(2009) Jiashi Miao et al.   ACTA MATERIALIA