Structure–performance evolution mechanism of the wear failure process of coated spherical plain bearings

Research on damage and failure behaviour of coated self-lubricating spherical plain bearings based on detection of friction torque and temperature rise

(2021) Yunfan Liu et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Tribological behaviors of vacuum hot-pressed ceramic composites with enhanced cyclic oxidation and corrosion resistance

(2020) Xuewu Li et al.   CERAMICS INTERNATIONAL

Roller bearing under high loaded oscillations: Life evolution and accommodation mechanisms

(2020) F. Cavacece et al.   TRIBOLOGY INTERNATIONAL

Role of transfer film formation on the tribological properties of polymeric composite materials and spherical plain bearing at low temperatures

(2020) Wenyan Cui et al.   TRIBOLOGY INTERNATIONAL

Contact and tribological properties of self-lubricating ellipsoidal plain bearings

(2019) Yahong Xue et al.   TRIBOLOGY INTERNATIONAL

Subtractive manufacturing of stable hierarchical micro-nano structures on AA5052 sheet with enhanced water repellence and durable corrosion resistance

(2019) Xuewu Li et al.   MATERIALS & DESIGN

Investigation on surface morphology and tribological property generated by vibration assisted strengthening on aviation spherical plain bearings

(2018) Zewei Yuan et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Tribological behaviour and wear mechanisms of manganese phosphate coatings under dry reciprocating sliding contact conditions

(2018) Saranya Azhaarudeen et al.   TRIBOLOGY INTERNATIONAL

Design of an experimental setup to determine the coefficient of static friction of the inner rings in contact with the outer rings of radial spherical plain bearings

(2018) Erkan Öztürk et al.   TRIBOLOGY INTERNATIONAL

Finite element simulation and experimental test of the wear behavior for self-lubricating spherical plain bearings

(2018) Yahong Xue et al.   Friction

Preparation and tribological properties of MoS2/graphite composite coatings modified by La2O3

(2018) Ming Qiu et al.   INDUSTRIAL LUBRICATION AND TRIBOLOGY

Synergistic effects of surface strengthening and surface micro-texture on aviation spherical plain bearing tribological properties

(2017) Zewei Yuan et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Influence of step load on tribological properties of self-lubricating radial spherical plain bearings with PTFE fabric liner

(2017) Ming Qiu et al.   TRIBOLOGY INTERNATIONAL

Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel

(2017) Y.J. Cao et al.   TRIBOLOGY INTERNATIONAL

Effect of mechanical properties of substrate and coating on wear performance of TiN- or DLC-coated 316LVM stainless steel

(2017) Magdalena Łępicka et al.   WEAR

Investigation on MoS2 and graphite coatings and their effects on the tribological properties of the radial spherical plain bearings

(2016) Ming Qiu et al.   Chinese Journal of Mechanical Engineering

Effects of woven liners treated by LaCl3 or CeO2 solution on film formation mechanisms of self-lubricating radial spherical plain bearings

(2016) Ming Qiu et al.   INDUSTRIAL LUBRICATION AND TRIBOLOGY

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

(2016) Zhanqi Tang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY

Experimental damage analysis in high loaded oscillating bearings

(2016) E. Houara Komba et al.   TRIBOLOGY INTERNATIONAL

Numerical analysis of self-lubricating radial spherical plain bearings and investigations on fatigue damage mechanisms of the liner

(2016) Jianjun Lu et al.   TRIBOLOGY INTERNATIONAL

Wear models and mechanical analysis of PTFE/Kevlar fabric woven liners used in radial spherical plain bearings

(2016) Jianjun Lu et al.   WEAR

Structure and wear behavior of NiCr–Cr 3 C 2 coatings sprayed by supersonic plasma spraying and high velocity oxy-fuel technologies

(2015) Li Lin et al.   APPLIED SURFACE SCIENCE

Failure mechanisms of ball bearings under lightly loaded, non-accelerated usage conditions

(2015) Hyunseok Oh et al.   TRIBOLOGY INTERNATIONAL

Film-forming mechanisms for self-lubricating radial spherical plain bearings with hybrid PTFE/aramid fabric liners modified by ultrasonic

(2015) Ming Qiu et al.   TRIBOLOGY INTERNATIONAL

A new universal approximate model for conformal contact and non-conformal contact of spherical surfaces

(2014) Xin Fang et al.   ACTA MECHANICA

Effects of weft density on the friction and wear properties of self-lubricating fabric liners for journal bearings under heavy load conditions

(2014) Xiaowen Qi et al.   WEAR

Properties of the BaTiO3 coating prepared by supersonic plasma spraying

(2013) Zhiguo Xing et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Research on the microstructure and space tribology properties of electric-brush plated Ni/MoS2–C composite coating

(2013) Guozheng Ma et al.   SURFACE & COATINGS TECHNOLOGY

Effects of rare earth treatment on tribological properties of self-lubricating spherical plain bearings

(2012) Ming Qiu et al.   WEAR

Mild-to-severe wear transition and transition region of oxidative wear in steels

(2012) S.Q. Wang et al.   WEAR

Microstructure and tribological properties of WS2/MoS2 multilayer films

(2011) Zhu Li-na et al.   APPLIED SURFACE SCIENCE

Investigation of rolling contact fatigue damage process of the coating by acoustics emission and vibration signals

(2011) Zhang Zhi-qiang et al.   TRIBOLOGY INTERNATIONAL

Endurance and performance of a composite spherical bearing

(2008) Byung Chul Kim et al.   COMPOSITE STRUCTURES

Development of a spherical bearing with uni-directional carbon/epoxy composite

(2008) Byung Chul Kim et al.   COMPOSITE STRUCTURES