Review of Flow Blurring Atomization: Advances and Perspectives

Low flow rate spray cooling by a flow blurring injector

(2021) M. Jafari et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Optical Characterization of Near-Field Sprays for Various Alternative and Conventional Jet Fuels Using a Flow-Blurring Injector

(2021) Imtiaz Qavi et al.   FLOW TURBULENCE AND COMBUSTION

Near-field spray characterization of a high-viscosity alternative jet fuel blend C-3 using a flow blurring injector

(2021) Imtiaz Qavi et al.   FUEL

On the Ejection of Filaments of Polymer Solutions Triggered by a Micrometer-Scale Mixing Mechanism

(2021) Fernando Marín-Brenes et al.   Materials

Study on Two-Phase Mixing Inside Flow Focusing/Blurring Nozzle by Gray Distribution Analysis Method

(2021) Jin Zhao et al.   Applied Sciences-Basel

Instability growth and fragment formation in air assisted atomization

(2020) G. Singh et al.   JOURNAL OF FLUID MECHANICS

A combined experimental and computational study of flow-blurring atomization in a twin-fluid atomizer

(2020) Raju Murugan et al.   EUROPEAN JOURNAL OF MECHANICS B-FLUIDS

Characterization of Flow-Focusing and Flow-Blurring Modes of Atomization

(2020) Othman J. Jaber et al.   ENERGY & FUELS

Experimental investigation into flow blurring atomization

(2020) Raju Murugan et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Dynamics of formation of poly(vinyl alcohol) filaments with an energetically efficient micro-mixing mechanism

(2020) Alberto Ramos-Escobar et al.   PHYSICS OF FLUIDS

Influence of liquid properties on atomization characteristics of flow-blurring injector at ultra-low flow rates

(2019) Mohammed Asad Khan et al.   ENERGY

Effect of injector swirl number on near-field spray characteristics of a novel twin-fluid injector

(2019) V. Danh et al.   EXPERIMENTS IN FLUIDS

Large Eddy Simulation of Two-Phase Flow Pattern and Transformation Characteristics of Flow Mixing Nozzle

(2019) Jin Zhao et al.   JOURNAL OF MECHANICS

Experimental study on the two-phase flow pattern and transformation characteristics of a flow mixing nozzle under a moderate flow rate

(2019) Jin Zhao et al.   MECCANICA

Flow blurring atomization of Poly(ethylene oxide) solutions below the coil overlap concentration

(2019) Miguel Hermosín-Reyes et al.   JOURNAL OF AEROSOL SCIENCE

First step towards atomization at ultra-low flow rates using conventional twin-fluid atomizer

(2019) Mohammed Asad Khan et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

A flow blurring nozzle design for combustion in a closed system

(2018) Radom Pongvuthithum et al.   APPLIED THERMAL ENGINEERING

Numerical simulation of flow focusing pattern and morphological changes in two-phase flow inside nozzle

(2018) Zhao Jin et al.   CHINESE JOURNAL OF CHEMICAL ENGINEERING

Science and technology of ammonia combustion

(2018) Hideaki Kobayashi et al.   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Development and combustion characterization of a novel twin-fluid fuel injector in a swirl-stabilized gas turbine burner operating on straight vegetable oil

(2018) Oladapo S. Akinyemi et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Investigation of water spray characteristics in the near field of a novel swirl burst injector

(2018) V. Danh et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Combustion of straight algae oil in a swirl-stabilized burner using a novel twin-fluid injector

(2018) Oladapo S. Akinyemi et al.   FUEL

Conditioned Analysis of Effervescent Atomization

(2017) A. Kourmatzis et al.   JOURNAL OF ENERGY ENGINEERING

Effects of Fluid Properties on Spray Characteristics of a Flow-Blurring Atomizer

(2017) Brian T. Fisher et al.   JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME

Forced ignition of turbulent spray flames

(2017) E. Mastorakos   PROCEEDINGS OF THE COMBUSTION INSTITUTE

Conditioned Analysis of Effervescent Atomization

(2017) A. Kourmatzis et al.   JOURNAL OF ENERGY ENGINEERING

Combined effervescent and airblast atomization of a liquid jet

(2016) A. Kourmatzis et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Effects of injector tip design on the spray characteristics of soy methyl ester biodiesel in a blurry injector

(2016) Cláudia Gonçalves de Azevedo et al.   RENEWABLE ENERGY

Spray features in the near field of a flow-blurring injector investigated by high-speed visualization and time-resolved PIV

(2015) Lulin Jiang et al.   EXPERIMENTS IN FLUIDS

Clean combustion of different liquid fuels using a novel injector

(2014) Lulin Jiang et al.   EXPERIMENTAL THERMAL AND FLUID SCIENCE

Investigation of Glycerol Atomization in the Near-Field of a Flow-Blurring Injector using Time-Resolved PIV and High-Speed Visualization

(2014) Lulin Jiang et al.   FLOW TURBULENCE AND COMBUSTION

Combustion of straight glycerol with/without methane using a fuel-flexible, low-emissions burner

(2014) Lulin Jiang et al.   FUEL

Air-assisted atomization of liquid jets in varying levels of turbulence

(2014) A. Kourmatzis et al.   JOURNAL OF FLUID MECHANICS

EFFECTS OF NOZZLE EXIT GEOMETRY ON SPRAY CHARACTERISTICS OF A BLURRY INJECTOR

(2013) Claudia Goncalves Azevedo et al.   ATOMIZATION AND SPRAYS

Imaging in the optically dense regions of a spray: A review of developing techniques

(2013) Mark Linne   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

Flow Blurring Atomization for Low-Emission Combustion of Liquid Biofuels

(2012) Benjamin M. Simmons et al.   COMBUSTION SCIENCE AND TECHNOLOGY

Modeling of turbulent dilute spray combustion

(2012) Patrick Jenny et al.   PROGRESS IN ENERGY AND COMBUSTION SCIENCE

SPRAY CHARACTERISTICS OF A FLOW-BLURRING ATOMIZER

(2011) Benjamin M. Simmons et al.   ATOMIZATION AND SPRAYS

Effervescent Atomization of Viscoelastic Liquids: Experiment and Modeling

(2008) S. C. Geckler et al.   JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME

Turbulence in pneumatic flow focusing and flow blurring regimes

(2008) Joan Rosell-Llompart et al.   PHYSICAL REVIEW E