Deformation and failure of pseudo-ductile quasi-isotropic all-carbon hybrid FRPS with an open hole under tension

Mode I and II interlaminar critical energy release rates in all-carbon interlayer unidirectional fibre-hybrids based on ultrahigh-modulus and high-strength fibres

(2020) Sergei B. Sapozhnikov et al.   COMPOSITE STRUCTURES

Thin-ply composite laminates: a review

(2020) Joel Galos   COMPOSITE STRUCTURES

In-situ imaging of inter- and intra-laminar damage in open-hole tension tests of carbon fibre-reinforced composites

(2020) Fatih E. Oz et al.   COMPOSITE STRUCTURES

Pseudo-ductile unidirectional high modulus/high strength carbon fibre hybrids using conventional ply thickness prepregs

(2020) S.B. Sapozhnikov et al.   COMPOSITES PART B-ENGINEERING

Mitigating the weak impact response of thin-ply based thin laminates through an unsymmetrical laminate design incorporating intermediate grade plies

(2019) A. Sasikumar et al.   COMPOSITE STRUCTURES

Design of Pseudoductile Unidirectional Hybrid Composites Based on the Model of a Dry Bundle

(2019) S. B. Sapozhnikov et al.   MECHANICS OF COMPOSITE MATERIALS

Multi-instrument in-situ damage monitoring in quasi-isotropic CFRP laminates under tension

(2018) Fatih E. Oz et al.   COMPOSITE STRUCTURES

Pseudo-ductility and reduced notch sensitivity in multi-directional all-carbon/epoxy thin-ply hybrid composites

(2018) Gergely Czél et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Notch insensitive orientation-dispersed pseudo-ductile thin-ply carbon/glass hybrid laminates

(2018) Mohamad Fotouhi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

A Modified Empirical Wavelet Transform for Acoustic Emission Signal Decomposition in Structural Health Monitoring

(2018) Shaopeng Dong et al.   SENSORS

Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy–glass/epoxy hybrid composites

(2016) Gergely Czél et al.   COMPOSITE STRUCTURES

Unification of strength scaling between unidirectional, quasi-isotropic, and notched carbon/epoxy laminates

(2016) Xiaodong Xu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Detection of fibre fracture and ply fragmentation in thin-ply UD carbon/glass hybrid laminates using acoustic emission

(2016) Mohamad Fotouhi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Thickness-dependence of the translaminar fracture toughness: Experimental study using thin-ply composites

(2016) R.F. Teixeira et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Feasibility and limitations of damage identification in composite materials using acoustic emission

(2015) Emmanuel Maillet et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Demonstration of pseudo-ductility in unidirectional hybrid composites made of discontinuous carbon/epoxy and continuous glass/epoxy plies

(2015) Gergely Czél et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Pseudo-ductility and damage suppression in thin ply CFRP angle-ply laminates

(2015) J.D. Fuller et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Pseudo-ductility in intermingled carbon/glass hybrid composites with highly aligned discontinuous fibres

(2015) HaNa Yu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Transverse cracking in carbon fiber reinforced polymer composites: Modal acoustic emission and peak frequency analysis

(2015) Christopher Baker et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Demonstration of pseudo-ductility in high performance glass/epoxy composites by hybridisation with thin-ply carbon prepreg

(2013) Gergely Czél et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Tensile properties of polyacrylonitrile- and pitch-based hybrid carbon fiber/polyimide composites with some nanoparticles in the matrix

(2013) Kimiyoshi Naito   JOURNAL OF MATERIALS SCIENCE

On acoustic emission for failure investigation in CFRP: Pattern recognition and peak frequency analyses

(2010) R. Gutkin et al.   MECHANICAL SYSTEMS AND SIGNAL PROCESSING

Comparison of open hole tension characteristics of high strength glass and carbon fibre-reinforced composite materials

(2008) R.M. O’Higgins et al.   COMPOSITES SCIENCE AND TECHNOLOGY