Comparison of impact resistance of carbon fibre composites with multiple ultra-thin CNT, aramid pulp, PBO and graphene interlayers

A multi-layer resin film infusion process to control CNTs distribution and alignment for improving CFRP interlaminar fracture toughness

(2021) Yonglyu He et al.   COMPOSITE STRUCTURES

Damage tolerance of few-layer graphene modified CFRP: From thin-to thick-ply laminates

(2021) Johann Körbelin et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Interlaminar toughening of unidirectional CFRP with multilayers graphene and MWCNTs for Mode Ⅱ fracture

(2020) Bin Liu et al.   COMPOSITE STRUCTURES

Flexure and flexure-after-impact properties of carbon fibre composites interleaved with ultra-thin non-woven aramid fibre veils

(2020) Bingyan Yuan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Transverse and longitudinal flexural properties of unidirectional carbon fiber composites interleaved with hierarchical Aramid pulp micro/nano-fibers

(2020) Fei Cheng et al.   COMPOSITES PART B-ENGINEERING

Effect of aramid pulp on low temperature flexural properties of carbon fibre reinforced plastics

(2020) Yunsen Hu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of graphene nanoplatelets on the impact response of a carbon fibre reinforced composite

(2020) A. Elmarakbi et al.   Materials Today Communications

Low-velocity impact performance of hybrid 3D carbon/glass woven orthogonal composite: Experiment and simulation

(2020) Zhenyu Wu et al.   COMPOSITES PART B-ENGINEERING

Effect of Z-pin inclined angle on the impact damage suppression effectiveness for cross-ply composite laminates

(2020) Binbin Liao et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Enhancing the fracture toughness of laminated composites through carbon nanotube belt stitching

(2020) Huigai Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Improving impact resistance and residual compressive strength of carbon fibre composites using un-bonded non-woven short aramid fibre veil

(2019) Bingyan Yuan et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

(2019) Yunfu Ou et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Successes and challenges in non-destructive testing of aircraft composite structures

(2019) Hossein TOWSYFYAN et al.   Chinese Journal of Aeronautics

The key role of thread and needle selection towards ‘through-thickness reinforcement’ in tufted carbon fiber-epoxy laminates

(2019) Kundan K. Verma et al.   COMPOSITES PART B-ENGINEERING

Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres

(2019) Dongdong Chen et al.   COMPOSITES PART B-ENGINEERING

Structuring the thermoplastic interleaf with lotus-leaf-like structure and its interlaminar toughening for CFRPs

(2019) Miaocai Guo et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Thermosetting CFRP interlaminar toughening with multi-layers graphene and MWCNTs under mode I fracture

(2019) Bin Liu et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Interleaving light veils to minimise the trade-off between mode-I interlaminar fracture toughness and in-plane properties

(2019) S.M. García-Rodríguez et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Impact characteristics of composite panel stitched by I-fiber process

(2019) Cheol-Hwan Kim et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Impact behavior of carbon fiber/epoxy composite tubes reinforced with multi-walled carbon nanotubes at cryogenic environment

(2018) Memduh Kara et al.   COMPOSITES PART B-ENGINEERING

In situ experimental investigation on the out-plane damage evolution of 3D woven carbon-fiber reinforced composites

(2018) Zhixing Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of Z-pinning on the impact resistance of composite laminates with different layups

(2018) L. Francesconi et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

The impact damage and residual load capacity of composite stepped bonding repairs and joints

(2018) Bin Liu et al.   COMPOSITES PART B-ENGINEERING

Experiment and design methods of composite scarf repair for primary-load bearing structures

(2016) Bin Liu et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

High damping and high stiffness CFRP composites with aramid non-woven fabric interlayers

(2015) Nannan Ni et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Observations of damage development from compression-after-impact experiments using ex situ micro-focus computed tomography

(2014) D.J. Bull et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Mode I interfacial toughening through discontinuous interleaves for damage suppression and control

(2011) M. Yasaee et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mode II interfacial toughening through discontinuous interleaves for damage suppression and control

(2011) M. Yasaee et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Electrospun nanofibre toughened carbon/epoxy composites: Effects of polyetherketone cardo (PEK-C) nanofibre diameter and interlayer thickness

(2010) Jin Zhang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes

(2009) V. Kostopoulos et al.   COMPOSITES SCIENCE AND TECHNOLOGY