The design of special woven-preformed structures for the high-performance film cooling with undamaged fibers based on 2.5D ceramic matrix composites

A self-piercing-through riveting method for joining of discontinuous carbon fiber reinforced nylon 6 composite

(2020) Zhenghua Rao et al.   COMPOSITE STRUCTURES

Prediction Model for the Anisotropic Thermal Conductivity of a 2.5-D Braided Ceramic Matrix Composite with Thin-Wall Structure

(2019) Zecan Tu et al.   Applied Sciences-Basel

Flat plate film cooling with linear and curved round-to-diffusion shaped slots using PSP measurement technique

(2019) Izhar Ullah et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

An Enhanced Flow-Thermo-Structural Modeling and Validation for the Integrated Analysis of a Film Cooling Nozzle Guide Vane

(2019) Peng Guan et al.   Energies

High-temperature mechanical properties and microstructure of C/C‒ZrC‒SiC‒ZrB2 composites prepared by a joint process of precursor infiltration and pyrolysis and slurry infiltration

(2019) Yan Jia et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of film hole geometry and blowing ratio on film cooling performance

(2019) Nan Cao et al.   APPLIED THERMAL ENGINEERING

A response surface approach for reliability analysis of 2.5D C/SiC composites turbine blade

(2016) Zhigang Sun et al.   COMPOSITES PART B-ENGINEERING

Wind blade joints based on non-crimp 3D orthogonal woven Pi shaped preforms

(2013) Keith Sharp et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Finite element simulation of stress distribution and development of Cf/SiC ceramic–matrix composite coated with single layer SiC coating during thermal shock

(2013) L. Wang et al.   COMPOSITES PART B-ENGINEERING

Theoretical simulation and experimental verification of C/SiC joints with pins or bolts

(2013) Guangde Li et al.   MATERIALS & DESIGN

Material design of a film cooling system using experimental heat transfer data

(2012) Kyung Min Kim et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Behaviour of composite plates with drilled and moulded hole under tensile load

(2011) R. Zitoune et al.   COMPOSITE STRUCTURES

Probabilistic analysis of a SiC/SiC ceramic matrix composite turbine vane

(2007) Pappu L.N. Murthy et al.   COMPOSITES PART B-ENGINEERING