A Ceramic‐Electrolyte Glucose Fuel Cell for Implantable Electronics

Non-stoichiometry, structure and properties of proton-conducting perovskite oxides

(2021) Shuangbin Li et al.   SOLID STATE IONICS

Careful Choices in Low Temperature Ceramic Processing and Slow Hydration Kinetics Can Affect Proton Conduction in Ceria

(2021) Philipp Simons et al.   ADVANCED FUNCTIONAL MATERIALS

Lithium-film ceramics for solid-state lithionic devices

(2020) Yuntong Zhu et al.   Nature Reviews Materials

Characterization and evaluation of Nafion HP JP as proton exchange membrane: transport properties, nanostructure, morphology, and cell performance

(2019) Michael S. A. Kamel et al.   JOURNAL OF SOLID STATE ELECTROCHEMISTRY

Evaluating surface protonic transport on cerium oxide via electrochemical impedance spectroscopy measurement

(2018) Ryo Manabe et al.   SOLID STATE COMMUNICATIONS

Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells

(2018) Sihyuk Choi et al.   Nature Energy

Review of implantable and external abiotically catalysed glucose fuel cells and the differences between their membranes and catalysts

(2016) Óscar Santiago et al.   APPLIED ENERGY

Wireless Recording in the Peripheral Nervous System with Ultrasonic Neural Dust

(2016) Dongjin Seo et al.   NEURON

Ultralow Power Circuit Design for Wireless Sensor Nodes for Structural Health Monitoring

(2016) Yoonmyung Lee et al.   PROCEEDINGS OF THE IEEE

Polymeric Biomaterials for Medical Implants and Devices

(2016) Adrian J.T. Teo et al.   ACS Biomaterials-Science & Engineering

Polymeric Biomaterials for Medical Implants and Devices

(2016) Adrian J.T. Teo et al.   ACS Biomaterials Science & Engineering

Contact lens biofuel cell tested in a synthetic tear solution

(2015) Russell C. Reid et al.   BIOSENSORS & BIOELECTRONICS

Investigation of nanoporous platinum thin films fabricated by reactive sputtering: Application as micro-SOFC electrode

(2015) WooChul Jung et al.   JOURNAL OF POWER SOURCES

The effect of mechanical twisting on oxygen ionic transport in solid-state energy conversion membranes

(2015) Yanuo Shi et al.   NATURE MATERIALS

Power Approaches for Implantable Medical Devices

(2015) Achraf Amar et al.   SENSORS

Catalytic properties and biomedical applications of cerium oxide nanoparticles

(2015) Carl Walkey et al.   Environmental Science-Nano

New and Emerging Energy Sources for Implantable Wireless Microdevices

(2015) Albert Kim et al.   IEEE Access

In Vivo Powering of Pacemaker by Breathing-Driven Implanted Triboelectric Nanogenerator

(2014) Qiang Zheng et al.   ADVANCED MATERIALS

Self-Powered Cardiac Pacemaker Enabled by Flexible Single Crystalline PMN-PT Piezoelectric Energy Harvester

(2014) Geon-Tae Hwang et al.   ADVANCED MATERIALS

Bioelectronic medicines: a research roadmap

(2014) Karen Birmingham et al.   NATURE REVIEWS DRUG DISCOVERY

The Cardiac Implantable Electronic Device Power Source: Evolution and Revolution

(2014) HARRY G. MOND et al.   PACE-PACING AND CLINICAL ELECTROPHYSIOLOGY

Cerium oxide nanoparticle: a remarkably versatile rare earth nanomaterial for biological applications

(2014) Can Xu et al.   NPG Asia Materials

Performance Loss of a Pt-Based Implantable Glucose Fuel Cell in Simulated Tissue and Cerebrospinal Fluids

(2014) Christian Köhler et al.   ChemElectroChem

Proton Conduction in Dense and Porous Nanocrystalline Ceria Thin Films

(2013) Giuliano Gregori et al.   ADVANCED FUNCTIONAL MATERIALS

A jump-start for electroceuticals

(2013) Kristoffer Famm et al.   NATURE

High volumetric power density, non-enzymatic, glucose fuel cells

(2013) Vlad Oncescu et al.   Scientific Reports

Cyclic Electrodeposition of PtCu Alloy: Facile Fabrication of Highly Porous Platinum Electrodes

(2012) Arne Kloke et al.   ADVANCED MATERIALS

Enzymatic fuel cells: Recent progress

(2012) Dónal Leech et al.   ELECTROCHIMICA ACTA

Batteries used to power implantable biomedical devices

(2012) David C. Bock et al.   ELECTROCHIMICA ACTA

Porous Platinum Electrodes Fabricated by Cyclic Electrodeposition of PtCu Alloy: Application to Implantable Glucose Fuel Cells

(2012) Arne Kloke et al.   Journal of Physical Chemistry C

Proton conductivity of columnar ceria thin-films grown by chemical vapor deposition

(2012) Tae-Sik Oh et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

A Glucose Fuel Cell for Implantable Brain–Machine Interfaces

(2012) Benjamin I. Rapoport et al.   PLoS One

Flexible triboelectric generator

(2012) Feng-Ru Fan et al.   Nano Energy

A comparison of redox polymer and enzyme co-immobilization on carbon electrodes to provide membrane-less glucose/O2 enzymatic fuel cells with improved power output and stability

(2011) Saravanan Rengaraj et al.   BIOSENSORS & BIOELECTRONICS

The impact of etching during microfabrication on the microstructure and the electrical conductivity of gadolinia-doped ceria thin films

(2011) Anja Bieberle-Hütter et al.   JOURNAL OF POWER SOURCES

Lowering the Temperature of Solid Oxide Fuel Cells

(2011) E. D. Wachsman et al.   SCIENCE

Materials challenges toward proton-conducting oxide fuel cells: a critical review

(2010) Emiliana Fabbri et al.   CHEMICAL SOCIETY REVIEWS

Grain boundaries in dense nanocrystalline ceria ceramics: exclusive pathways for proton conduction at room temperature

(2010) Hugo J. Avila-Paredes et al.   JOURNAL OF MATERIALS CHEMISTRY

Raney-platinum film electrodes for potentially implantable glucose fuel cells. Part 2: Glucose-tolerant oxygen reduction cathodes

(2010) S. Kerzenmacher et al.   JOURNAL OF POWER SOURCES

Raney-platinum film electrodes for potentially implantable glucose fuel cells. Part 1: Nickel-free glucose oxidation anodes

(2010) S. Kerzenmacher et al.   JOURNAL OF POWER SOURCES

A potentially implantable glucose fuel cell with Raney-platinum film electrodes for improved hydrolytic and oxidative stability

(2010) S. Kerzenmacher et al.   JOURNAL OF POWER SOURCES

High proton conduction in grain-boundary-free yttrium-doped barium zirconate films grown by pulsed laser deposition

(2010) Daniele Pergolesi et al.   NATURE MATERIALS

On the proton conductivity in pure and gadolinium doped nanocrystalline cerium oxide

(2010) Mona Shirpour et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Review on microfabricated micro-solid oxide fuel cell membranes

(2009) Anna Evans et al.   JOURNAL OF POWER SOURCES

Wet-etching of precipitation-based thin film microstructures for micro-solid oxide fuel cells

(2009) Jennifer L.M. Rupp et al.   JOURNAL OF POWER SOURCES

Intermediate temperature solid oxide fuel cells

(2008) Daniel J. L. Brett et al.   CHEMICAL SOCIETY REVIEWS

Energy harvesting by implantable abiotically catalyzed glucose fuel cells

(2008) S. Kerzenmacher et al.   JOURNAL OF POWER SOURCES

An abiotically catalyzed glucose fuel cell for powering medical implants: Reconstructed manufacturing protocol and analysis of performance

(2008) S. Kerzenmacher et al.   JOURNAL OF POWER SOURCES

Microstructures of CGO and YSZ Thin Films by Pulsed Laser Deposition

(2007) A. Infortuna et al.   ADVANCED FUNCTIONAL MATERIALS