Ultra high performance concrete (UHPC): reactive powder concrete, slurry infiltrated fiber concrete and superabsorbent polymer concrete

Enhancing the PVA fiber-matrix interface properties in ultra high performance concrete: An experimental and molecular dynamics study

(2021) Yang Zhou et al.   CONSTRUCTION AND BUILDING MATERIALS

The Role of Supplementary Cementitious Materials (SCMs) in Ultra High Performance Concrete (UHPC): A Review

(2021) Sungwoo Park et al.   Materials

Freeze-thaw resistance of Ultra-High performance concrete: Dependence on concrete composition

(2021) Zhe Lu et al.   CONSTRUCTION AND BUILDING MATERIALS

A comparative review on foam-based versus lightweight aggregate-based alkali-activated materials and geopolymer

(2021) Mehrab Nodehi   Innovative Infrastructure Solutions

Sustainable concrete for circular economy: a review on use of waste glass

(2021) Mehrab Nodehi et al.   Glass Structures & Engineering

High strength fiber reinforced one-part alkali activated slag/fly ash binders with ceramic aggregates: Microscopic analysis, mechanical properties, drying shrinkage, and freeze-thaw resistance

(2020) Z. Abdollahnejad et al.   CONSTRUCTION AND BUILDING MATERIALS

Optimization and characterization of high-volume limestone powder in sustainable ultra-high performance concrete

(2020) P.P. Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of Fiber Type on Blast Resistance of Slurry-Infiltrated Fiber Concrete Under Contact Detonation

(2020) Shintaro Morishima et al.   Journal of Advanced Concrete Technology

Development history and synthesis of super-absorbent polymers: a review

(2020) Xiaofang Ma et al.   JOURNAL OF POLYMER RESEARCH

Thermo-mechanical and moisture absorption properties of fly ash-based lightweight geopolymer concrete reinforced by polypropylene fibers

(2020) Yijiang Wang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of superabsorbent polymer characteristics on rheology of ultra-high performance concrete

(2020) Jianhui Liu et al.   CEMENT & CONCRETE COMPOSITES

Mechanical and fracture properties of ultra-high performance geopolymer concrete: Effects of steel fiber and silica fume

(2020) Yiwei Liu et al.   CEMENT & CONCRETE COMPOSITES

Experimental characterisation of non-encapsulated bio-based concrete with self-healing capacity

(2020) Hazha Mohammed et al.   CONSTRUCTION AND BUILDING MATERIALS

Durability of ultra-high performance concrete – A review

(2020) Junquan Li et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties of slag based geopolymer reactive powder concrete

(2020) Ola A. Mayhoub et al.   Ain Shams Engineering Journal

The influence of ingredients on the properties of reactive powder concrete: A review

(2020) Ola A. Mayhoub et al.   Ain Shams Engineering Journal

Combined compression-shear performance and failure criteria of internally cured concrete with super absorbent polymer

(2020) Xie Faxiang et al.   CONSTRUCTION AND BUILDING MATERIALS

Engineering properties of alkali activated materials reactive powder concrete

(2020) Yousef R. Alharbi et al.   CONSTRUCTION AND BUILDING MATERIALS

Experimental study on the mechanical properties of internally cured concrete with super absorbent polymer under monotonic and cyclic loads

(2020) Faxiang Xie et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of using available metakaoline and nano materials on the behavior of reactive powder concrete

(2020) Yousef R. Alharbi et al.   CONSTRUCTION AND BUILDING MATERIALS

Life-Cycle Assessment of High-Strength Concrete Mixtures with Copper Slag as Sand Replacement

(2019) Aysegul Petek Gursel et al.   Advances in Civil Engineering

Microstructural Analysis and Strength Development of One-Part Alkali-Activated Slag/Ceramic Binders Under Different Curing Regimes

(2019) Z. Abdollahnejad et al.   Waste and Biomass Valorization

Experimental Investigations on the Properties of Epoxy-Resin-Bonded Cement Concrete Containing Sea Sand for Use in Unreinforced Concrete Applications

(2019) Sakthieswaran Natarajan et al.   Materials

Inclusion of nano metaclayed as additive in ultra high performance concrete (UHPC)

(2019) M.S. Muhd Norhasri et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete

(2019) Peiliang Shen et al.   CEMENT AND CONCRETE RESEARCH

High energy absorbent ultra-high-performance concrete with hybrid steel and polyethylene fibers

(2019) Doo-Yeol Yoo et al.   CONSTRUCTION AND BUILDING MATERIALS

Changes in rheology and mechanical properties of ultra-high performance concrete with silica fume content

(2019) Zemei Wu et al.   CEMENT AND CONCRETE RESEARCH

Internal curing with superabsorbent polymers of different chemical structures

(2019) Peihua Zhong et al.   CEMENT AND CONCRETE RESEARCH

Rheological properties of ultra-high-performance concrete — An overview

(2019) Kamal Henri Khayat et al.   CEMENT AND CONCRETE RESEARCH

Investigation of mechanical properties and shrinkage of ultra-high performance concrete: Influence of steel fiber content and shape

(2019) Zemei Wu et al.   COMPOSITES PART B-ENGINEERING

Thin Slabs Made of High-Performance Steel Fibre-Reinforced Cementitious Composite: Mechanical Behaviour, Statistical Analysis and Microstructural Investigation

(2019) Paulo Roberto Ribeiro Soares Junior et al.   Materials

Effects of superabsorbent polymer on interfacial transition zone and mechanical properties of ultra-high performance concrete

(2019) Jianhui Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Characterizations of autogenous and drying shrinkage of ultra-high performance concrete (UHPC): An experimental study

(2018) T. Xie et al.   CEMENT & CONCRETE COMPOSITES

The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete

(2018) Sung-Hoon Kang et al.   CONSTRUCTION AND BUILDING MATERIALS

Tensile creep and cracking potential of high performance concrete internally cured with super absorbent polymers at early age

(2018) Dejian Shen et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of autoclave curing and fly ash on mechanical properties of ultra-high performance concrete

(2018) Tiefeng Chen et al.   CONSTRUCTION AND BUILDING MATERIALS

Desorption of superabsorbent hydrogels with varied chemical compositions in cementitious materials

(2018) K. Farzanian et al.   MATERIALS AND STRUCTURES

The use of limestone to replace physical filler of quartz powder in UHPFRC

(2018) Sung-Hoon Kang et al.   CEMENT & CONCRETE COMPOSITES

Improving the properties of recycled concrete aggregate with bio-deposition approach

(2018) Chun-Ran Wu et al.   CEMENT & CONCRETE COMPOSITES

Water penetration through cracks in self-healing cementitious materials with superabsorbent polymers studied by neutron radiography

(2018) D. Snoeck et al.   CEMENT AND CONCRETE RESEARCH

The use of rice husk ash as reactive filler in ultra-high performance concrete

(2018) Sung-Hoon Kang et al.   CEMENT AND CONCRETE RESEARCH

Mechanical properties of slurry infiltrated fiber concrete produced with waste steel fibers

(2018) Ozkan Sengul   CONSTRUCTION AND BUILDING MATERIALS

Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures

(2018) Mir Alimohammad Mirgozar Langaroudi et al.   CONSTRUCTION AND BUILDING MATERIALS

Biomineralization in metakaolin modified cement mortar to improve its strength with lowered cement content

(2017) Mengmeng Li et al.   JOURNAL OF HAZARDOUS MATERIALS

Effects of silica powder and cement type on durability of ultra high performance concrete (UHPC)

(2016) Mo Alkaysi et al.   CEMENT & CONCRETE COMPOSITES

Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete

(2016) Zemei Wu et al.   CONSTRUCTION AND BUILDING MATERIALS

Bacteria-based self-healing concrete to increase liquid tightness of cracks

(2016) E. Tziviloglou et al.   CONSTRUCTION AND BUILDING MATERIALS

Polypropylene fiber reinforced cement mortars containing rice husk ash and nano-alumina

(2016) Ehsan Mohseni et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study

(2016) Viktor Mechtcherine et al.   MATERIALS AND STRUCTURES

Optimization and performance of cost-effective ultra-high performance concrete

(2016) Weina Meng et al.   MATERIALS AND STRUCTURES

Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars — Development of yield stress and plastic viscosity over time

(2015) Viktor Mechtcherine et al.   CEMENT AND CONCRETE RESEARCH

Autogenous healing of marine exposed concrete: Characterization and quantification through visual crack closure

(2015) D. Palin et al.   CEMENT AND CONCRETE RESEARCH

Internal curing by superabsorbent polymers in ultra-high performance concrete

(2015) J. Justs et al.   CEMENT AND CONCRETE RESEARCH

Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete

(2015) Dejian Shen et al.   CONSTRUCTION AND BUILDING MATERIALS

Supplementary cementitious materials origin from agricultural wastes – A review

(2015) Evi Aprianti et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of concrete at high temperature—A review

(2015) Qianmin Ma et al.   CONSTRUCTION AND BUILDING MATERIALS

A review on ultra high performance concrete: Part I. Raw materials and mixture design

(2015) Caijun Shi et al.   CONSTRUCTION AND BUILDING MATERIALS

Properties and microstructure of reactive powder concrete having a high content of phosphorous slag powder and silica fume

(2015) Yanzhou Peng et al.   CONSTRUCTION AND BUILDING MATERIALS

Autogenous Shrinkage of Concrete with Super-Absorbent Polymer

(2014)   ACI MATERIALS JOURNAL

The influence of superabsorbent polymers on strength and durability properties of blended cement mortars

(2014) H. Beushausen et al.   CEMENT & CONCRETE COMPOSITES

The effect of high temperature on reactive powder concrete

(2014) Mehmet Canbaz   CONSTRUCTION AND BUILDING MATERIALS

The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete

(2014) Ehsan Ghafari et al.   MATERIALS & DESIGN

Durability of an Ultra High Performance Fiber Reinforced Concrete (UHPFRC) under progressive aging

(2013) Wei Wang et al.   CEMENT AND CONCRETE RESEARCH

Biogenic treatment improves the durability and remediates the cracks of concrete structures

(2013) Varenyam Achal et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC

(2013) J. Dils et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of partially hydrated cementitious materials and superabsorbent polymer on early-age shrinkage of UHPC

(2013) A.M. Soliman et al.   CONSTRUCTION AND BUILDING MATERIALS

Utilization of iron ore tailings as fine aggregate in ultra-high performance concrete

(2013) Sujing Zhao et al.   CONSTRUCTION AND BUILDING MATERIALS

Colour Change in Heated Concrete

(2013) Izabela Hager   FIRE TECHNOLOGY

Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio

(2013) Janis Justs et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Void structure of concrete with superabsorbent polymers and its relation to frost resistance of concrete

(2013) Sara Laustsen et al.   MATERIALS AND STRUCTURES

Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage

(2012) Christof Schröfl et al.   CEMENT AND CONCRETE RESEARCH

Preferential adsorption of polycarboxylate superplasticizers on cement and silica fume in ultra-high performance concrete (UHPC)

(2012) Ch. Schröfl et al.   CEMENT AND CONCRETE RESEARCH

Pull-out behavior of single steel fiber from SIFCON matrix

(2012) Murat Tuyan et al.   CONSTRUCTION AND BUILDING MATERIALS

Effects of Water Content and Chemical Composition on Structural Properties of Alkaline Activated Metakaolin-Based Geopolymers

(2012) Maricela Lizcano et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Structural Evolution during Geopolymerization from an Early Age to Consolidated Material

(2012) Prune Steins et al.   LANGMUIR

Effects of nano- and micro-limestone addition on early-age properties of ultra-high-performance concrete

(2012) J. Camiletti et al.   MATERIALS AND STRUCTURES

Optimization of material characteristics of macro-defect free cement

(2011) Ozgur Ekincioglu et al.   CEMENT & CONCRETE COMPOSITES

Preparation of Ultra-High Performance Concrete with common technology and materials

(2011) Chong Wang et al.   CEMENT & CONCRETE COMPOSITES

Hydration and microstructure of ultra high performance concrete incorporating rice husk ash

(2011) Nguyen Van Tuan et al.   CEMENT AND CONCRETE RESEARCH

Mechanical and physical properties of epoxy polymer concrete after exposure to temperatures up to 250°C

(2011) Oussama Elalaoui et al.   CONSTRUCTION AND BUILDING MATERIALS

Evaluation method for cracking resistant behavior of reactive powder concrete

(2011) Tao Ji et al.   CONSTRUCTION AND BUILDING MATERIALS

Blast-resistant characteristics of ultra-high strength concrete and reactive powder concrete

(2011) Na-Hyun Yi et al.   CONSTRUCTION AND BUILDING MATERIALS

Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong

(2011) C.M. Tam et al.   CONSTRUCTION AND BUILDING MATERIALS

Ultra-high performance concrete and fiber reinforced concrete: achieving strength and ductility without heat curing

(2011) Kay Wille et al.   MATERIALS AND STRUCTURES

Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching 800°C

(2011) Yuh-Shiou Tai et al.   NUCLEAR ENGINEERING AND DESIGN

Mechanical properties of reactive powder concrete containing high volumes of ground granulated blast furnace slag

(2010) Halit Yazıcı et al.   CEMENT & CONCRETE COMPOSITES

Autogenous healing of engineered cementitious composites at early age

(2010) Yingzi Yang et al.   CEMENT AND CONCRETE RESEARCH

The study of using rice husk ash to produce ultra high performance concrete

(2010) Nguyen Van Tuan et al.   CONSTRUCTION AND BUILDING MATERIALS

The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete

(2010) Su Tae Kang et al.   CONSTRUCTION AND BUILDING MATERIALS

Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase

(2010) Metin Ipek et al.   CONSTRUCTION AND BUILDING MATERIALS

Improvement on SIFCON Performance by Fiber Orientation and High-Volume Mineral Admixtures

(2010) Halit Yazıcı et al.   JOURNAL OF MATERIALS IN CIVIL ENGINEERING

Optimal conditions for producing reactive powder concrete

(2010) C.M. Tam et al.   MAGAZINE OF CONCRETE RESEARCH

Potential of superabsorbent polymer for self‐sealing cracks in concrete

(2009) H. Lee   Advances in Applied Ceramics

Autogenous healing of engineered cementitious composites under wet–dry cycles

(2009) Yingzi Yang et al.   CEMENT AND CONCRETE RESEARCH

Durability and micro-structure of reactive powder concrete

(2009) Juanhong Liu et al.   JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION

Uniaxial compression tests at various loading rates for reactive powder concrete

(2009) Y.S. Tai   THEORETICAL AND APPLIED FRACTURE MECHANICS

Preparation of C200 green reactive powder concrete and its static–dynamic behaviors

(2008) Zhang Yunsheng et al.   CEMENT & CONCRETE COMPOSITES

Fire performance of highly flowable reactive powder concrete

(2008) Chin-Tsung Liu et al.   CONSTRUCTION AND BUILDING MATERIALS

Recent developments in macro-defect-free (MDF) cements

(2008) S. Donatello et al.   CONSTRUCTION AND BUILDING MATERIALS

Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)

(2008) S.L. Yang et al.   CONSTRUCTION AND BUILDING MATERIALS

Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes

(2008) Halit Yazıcı et al.   CONSTRUCTION AND BUILDING MATERIALS