Polymer Hole Transport Materials for Perovskite Solar Cells via Buchwald–Hartwig Amination

Molecular weight effect of poly-TPD hole-transporting layer on the performance of inverted perovskite solar cells

(2021) Xuzhi Hu et al.   SOLAR ENERGY

Impact of P3HT Regioregularity and Molecular Weight on the Efficiency and Stability of Perovskite Solar Cells

(2021) Narges Yaghoobi Nia et al.   ACS Sustainable Chemistry & Engineering

Impact of Molecular Weight on the Mechanical and Electrical Properties of a High-Mobility Diketopyrrolopyrrole-Based Conjugated Polymer

(2020) Dandan Pei et al.   MACROMOLECULES

Efficient, stable silicon tandem cells enabled by anion-engineered wide-bandgap perovskites

(2020) Daehan Kim et al.   SCIENCE

Barrier Designs in Perovskite Solar Cells for Long‐Term Stability

(2020) Shasha Zhang et al.   Advanced Energy Materials

Carbazole-Based Hole-Transport Materials for High-Efficiency and Stable Perovskite Solar Cells

(2020) Liguo Gao et al.   ACS Applied Energy Materials

Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells

(2020) Gwisu Kim et al.   SCIENCE

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

(2020) Amran Al-Ashouri et al.   SCIENCE

Scaling-up perovskite solar cells on hydrophobic surfaces

(2020) Furkan H. Isikgor et al.   Nano Energy

Thermally Stable Perovskite Solar Cells by Systematic Molecular Design of the Hole-Transport Layer

(2019) Tracy H. Schloemer et al.   ACS Energy Letters

Carrier lifetimes of >1 μs in Sn-Pb perovskites enable efficient all-perovskite tandem solar cells

(2019) Jinhui Tong et al.   SCIENCE

Hole-Transport Layer Molecular Weight and Doping Effects on Perovskite Solar Cell Efficiency and Mechanical Behavior

(2019) Inhwa Lee et al.   ACS Applied Materials & Interfaces

Dopant-Free Hole-Transporting Polycarbazoles with Tailored Backbones for Efficient Inverted Perovskite Solar Cells

(2019) Yuanyuan Xie et al.   MACROMOLECULES

Efficient Solution Processed CH3NH3PbI3 Perovskite Solar Cells with PolyTPD Hole Transport Layer

(2019) Julian Höcker et al.   ZEITSCHRIFT FUR NATURFORSCHUNG SECTION A-A JOURNAL OF PHYSICAL SCIENCES

Effect of Backbone Rigidity on the Glass Transition of Polymers of Intrinsic Microporosity Probed by Fast Scanning Calorimetry

(2019) Huajie Yin et al.   ACS Macro Letters

Interfacial Passivation of the p-Doped Hole-Transporting Layer Using General Insulating Polymers for High-Performance Inverted Perovskite Solar Cells

(2018) Fan Zhang et al.   Small

A review on the classification of organic/inorganic/carbonaceous hole transporting materials for perovskite solar cell application

(2018) Selvakumar Pitchaiya et al.   Arabian Journal of Chemistry

Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability

(2018) Jeffrey A. Christians et al.   Nature Energy

Sequentially Fluorinated PTAA Polymers for Enhancing V OC of High-Performance Perovskite Solar Cells

(2018) Youngwoong Kim et al.   Advanced Energy Materials

Visualization and suppression of interfacial recombination for high-efficiency large-area pin perovskite solar cells

(2018) Martin Stolterfoht et al.   Nature Energy

High-efficiency large-area perovskite photovoltaic modules achieved via electrochemically assembled metal-filamentary nanoelectrodes

(2018) Soonil Hong et al.   Science Advances

Approaching the fill factor Shockley–Queisser limit in stable, dopant-free triple cation perovskite solar cells

(2017) Martin Stolterfoht et al.   Energy & Environmental Science

Interface Engineering for Highly Efficient and Stable Planar p-i-n Perovskite Solar Cells

(2017) Yang Bai et al.   Advanced Energy Materials

Advances in hole transport materials engineering for stable and efficient perovskite solar cells

(2017) Zinab H. Bakr et al.   Nano Energy

Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions

(2017) Tejas S. Sherkar et al.   ACS Energy Letters

Effects of molecular weight on the optical and electrochemical properties of EDOT-based π-conjugated polymers

(2017) Shotaro Hayashi et al.   Scientific Reports

Hydrophobic Organic Hole Transporters for Improved Moisture Resistance in Metal Halide Perovskite Solar Cells

(2016) Tomas Leijtens et al.   ACS Applied Materials & Interfaces

Inverted Perovskite Solar Cells: Progresses and Perspectives

(2016) Tanghao Liu et al.   Advanced Energy Materials

On the Glass Transition of Polymer Semiconductors and Its Impact on Polymer Solar Cell Stability

(2015) Christian Müller   CHEMISTRY OF MATERIALS

The effect of residual palladium catalyst on the performance and stability of PCDTBT:PC70BM organic solar cells

(2015) Christopher Bracher et al.   ORGANIC ELECTRONICS

Effect of molecular weight on the properties and organic solar cell device performance of a donor–acceptor conjugated polymer

(2015) Zeyun Xiao et al.   Polymer Chemistry

Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells

(2015) Cheng Bi et al.   Nature Communications

Domain Purity, Miscibility, and Molecular Orientation at Donor/Acceptor Interfaces in High Performance Organic Solar Cells: Paths to Further Improvement

(2013) Wei Ma et al.   Advanced Energy Materials

Triarylamine polymers of bridged phenylenes by (N-heterocyclic carbene)-palladium catalysed C–N coupling

(2013) Reiner Sebastian Sprick et al.   Journal of Materials Chemistry C

Hole Transport Materials with Low Glass Transition Temperatures and High Solubility for Application in Solid-State Dye-Sensitized Solar Cells

(2012) Tomas Leijtens et al.   ACS Nano

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

(2009) Akihiro Kojima et al.   JOURNAL OF THE AMERICAN CHEMICAL SOCIETY

Triarylamine polymers by microwave-assisted polycondensation for use in organic field-effect transistors

(2008) Masaki Horie et al.   JOURNAL OF MATERIALS CHEMISTRY