4.7 Article

Rare Earth Oxide-Assisted Sintered NASICON Electrolyte Composed of a Phosphate Grain Boundary Phase with Low Electronic Conductivity

Journal

ACS APPLIED ENERGY MATERIALS
Volume 5, Issue 1, Pages 777-783

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acsaem.1c03254

Keywords

solid-state electrolytes; NASICON; grain boundary phase; electronic conductivity; Na dendrite

Funding

  1. National Natural Science Foundation of China [51777138]
  2. Natural Science Foundation of Tianjin City [18JCZDJC99700, 18JCYBJC87400, 18JCQNJC73900]
  3. Tianjin Research Innovation Project for Postgraduate Students [2020YJSB154]

Ask authors/readers for more resources

Rare earth oxide-assisted sintering method was successfully utilized to enhance the ionic conductivity and restrict dendrite formation in NASICON-type solid-state electrolytes for sodium metal batteries, showing promising results in critical current density values and discharge capacity after cycles.
A NASICON-type electrolyte was considered to be one of the most promising electrolytes for solid-state Na metal batteries. However, its lower ion conductivity compared to a liquid electrolyte and the formation of Na dendrites hinder its practical application. Herein, NASICON-type (Na3Zr2Si2PO12) solid-state electrolytes with developed ionic conductivity and declined electronic conductivity were synthesized through the rare earth oxide-assisted sintering method, such as Sm2O3 and Ho2O3. With the presence of Sm2O3 and Ho2O3 during sintering, the formed phosphate grain boundary phase adjusts the Si/P ratio in the NASICON structure with higher Na+ occupancy and then enhances the ionic conductivity of electrolytes. On the other hand, the formed phosphate grain boundary phase with low electronic conductivity prevents the movement of electrons at the grain boundary, reducing the probability that electrons combine with Na+ at the grain boundary to form Na-0, thereby restricting the formation of dendrites along grain boundaries. In addition, the added Sm2O3 and Ho2O3 play the role of fluxing agents to increase the densification of ceramics, further enabling the enhancement of ionic conductivity and restriction of dendrites in the voids. As a result, the obtained NZSP-0.2Sm and NZSP-0.3Ho electrolytes deliver critical current density (CCD) values of 0.85 and 0.65 mA cm(-2), respectively, at room temperature. Application of the obtained electrolytes in Na metal batteries is evaluated by assembling Na3V2(PO4)(3)vertical bar NZSP-0.2Sm/0.3Ho vertical bar Na cells, which deliver high discharge capacity values of 102.6 and 101.8 mAh g(-1) at 0.5 C after 100 cycles with capacity retention ratios of 98.3 and 98.6%, respectively. The presented results indicated that rare earth oxideassisted sintering is an effective route to improve the ionic conductivity and restrict dendrite formation for oxide ceramic solid-state electrolytes.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

Article Engineering, Environmental

Effective resistance to dendrite growth of NASICON solid electrolyte with lower electronic conductivity

Xinxin Wang, Jingjing Chen, Zhiyong Mao, Dajian Wang

Summary: The study demonstrated that doping lanthanide ions can enhance the ionic conductivity and relative density while reducing the electronic conductivity of NASICON electrolytes, leading to improved resistance to dendrite growth in solid-state lithium/sodium batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Enhanced water durability of phosphor-in-glass (PiG) basing on SnCl2-P2O5 glass matrix induced by adding ZnO

Da Xu, Wei Wang, Zhiwei Zhang, Zhiyong Mao, Dajian Wang

Summary: This study demonstrates the water durability of PiG based on SnCl2-P2O5-ZnO glass matrix. The addition of ZnO significantly enhances the water durability of SnCl2-P2O5-based PiG without noticeable loss of light output.

FUNCTIONAL MATERIALS LETTERS (2022)

Article Engineering, Electrical & Electronic

Synthesis and luminescent properties: Mn4+-doped Sr3NaNbO6 phosphor with far-red emission

Wei Wang, Da Xu, Jingjing Chen, Zhiyong Mao, Dajian Wang

Summary: The unique luminescence properties of far-red emitting materials make them important components in phosphor-converted LEDs for plant cultivation. The synthesized Sr3NaNbO6:Mn4+ phosphor with far-red emitting can meet the requirements of practical application for indoor plant cultivation.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Article Electrochemistry

Hard Carbon Derived from Graphite Anode by Mechanochemistry and the Enhanced Lithium-Ion Storage Performance

Xiaotong Wang, Jingjing Chen, Chenlong Dong, Dajian Wang, Zhiyong Mao

Summary: This study demonstrates the conversion of commercial graphite into hard carbon material through a mechanochemical method, resulting in significantly improved lithium-ion storage performance. The obtained hard carbon anode exhibits higher lithium storage capacity, attributed to the presence of defects induced by the mechanochemical process serving as active sites.

CHEMELECTROCHEM (2022)

Article Electrochemistry

Functional surface modification of P2-type layered Mn-based oxide cathode by thin layer of NASICON for sodium-ion batteries

Yuqiu Shao, Xinxin Wang, Bingchen Li, Huirong Ma, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: P2-type manganese-based oxides have attracted considerable attention as high-energy-density and low-cost cathodes in sodium ion batteries (SIBs). However, they still suffer from slow kinetics and the unfavorable Jahn-Teller effect. In this study, a thin layer of well-known Na3Zr2Si2PO12 was coated on the surface of P2-type Na0.612K0.056MnO2 to enhance the electrochemical sodium storage and structural stability. The coated material showed improved discharge capacity, capacity retention, and Na+ diffusion coefficient, making it a promising option for high-performance cathodes in SIBs.

ELECTROCHIMICA ACTA (2023)

Article Chemistry, Physical

Rapid ultrasound welding toward compact Na/Beta-Al2O3 interface realizing room-temperature solid-state sodium metal battery

Xiaole Yu, Yiwei Yao, Xinxin Wang, Shangxu Cen, Dongchen Li, Huirong Ma, Jingjing Chen, Dajian Wang, Zhiyong Mao, Chenlong Dong

Summary: This study successfully addresses the challenging interfacial issues in solid-state sodium metal batteries through ultrasound welding strategy and achieves stable operation of a room-temperature sodium metal full battery.

ENERGY STORAGE MATERIALS (2023)

Article Chemistry, Physical

Lithiophilic silver nanowires-fenced three-dimensional carbon cloth current collector for dendrite-free lithium deposition

Zhongrui Yu, Xiaole Yu, Mengnuo Fu, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: A lithiophilic Ag nanowires-fenced 3D carbon cloth current collector (Ag NWs/CC) has been developed to address the safety issues caused by dendritic lithium growth. The Ag NWs/CC current collector effectively reduces local current density, regulates Li nucleation, and alleviates dendritic lithium growth, resulting in high Coulombic efficiency and stable cyclic performance.

CARBON (2023)

Article Materials Science, Ceramics

The effect of polished surface microstructure of ceramic electrolyte on solid-state sodium metal batteries

Qi Guo, Xinxin Wang, Mengnuo Fu, Xiaole Yu, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: Ensuring a highly stable Na anode/solid-state electrolyte (SSE) interface is crucial for engineering robust solid-state sodium metal batteries (SSMB). This study demonstrates that the polish procedure of ceramic SSE pellets can influence the compatibility and wettability of Na on SSE pellets, leading to variations in roughness, contact area, and ravines. By optimizing the surface microstructure of SSE pellets through polishing, the researchers achieved a stable cycling performance of 5000 hours at room temperature.

CERAMICS INTERNATIONAL (2023)

Article Materials Science, Ceramics

Stabilizing the Na/Beta-Al2O3 interface with mixed ionic-electronic conductor towards room-temperature solid-state sodium metal battery

Yiwei Yao, Huirong Ma, Xiaole Yu, Xinxin Wang, Jingjing Chen, Liqiang Lu, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: In this work, a mixed ionic-electronic (MIE) conductive layer (Na-Sn alloy and Na2S) is in-situ constructed to engineer the intimate Na/BetaAl2O3-MIE interface, reducing the interfacial resistance. By incorporating this ameliorative interface into solid-state sodium metal batteries (SSMBs), stable cycling performance and high capacity retention are achieved.

CERAMICS INTERNATIONAL (2023)

Article Electrochemistry

Strengthening reversibility at high rate of spinel LiMn2O4 by aluminum and copper Co-doping for lithium ion battery

Bingchen Li, Mei Wang, Yuanxia Zhang, Qi Guo, Ru-Ning Tian, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: In this work, Cu and Al elements are respectively doped into Mn sites and Li sites to reinforce the structural stability of LiMn2O4 cathode materials. The synthesized Li1-3xAlxMn1.75Cu0.25O4 shows enhanced cyclic capacity and stability under wide electrochemical window. Cu doping enhances the phase transformation reversibility between & lambda;-MnO2 and LiMn2O4, while Al doping strengthens the cubic-to-tetragonal reversibility. This work provides an effective strategy for engineering stable LiMn2O4 spinel cathodes under high current density and wide potential window for lithium ion battery.

ELECTROCHIMICA ACTA (2023)

Article Chemistry, Physical

Optimizing Na plating/stripping by a liquid sodiophilic Ga-Sn-In alloy towards dendrite-poor sodium metal anodes

Mengnuo Fu, Xilin Zhang, Wujie Dong, Bingchen Li, Ru-Ning Tian, Qi Guo, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: Benefiting from abundant Na resources and high theoretical capacity, rechargeable sodium metal batteries show great potential for next-generation energy storage systems. However, there are several challenges of Na anodes, including high activity of Na metal, uncontrollable dendrite growth, and unstable solid-electrolyte interface (SEI). In this study, a liquid alloy of Ga, Sn, and In was coated on commercial Cu foil to regulate Na plating/stripping behaviors and achieve stable sodium metal batteries.

ENERGY STORAGE MATERIALS (2023)

Article Chemistry, Multidisciplinary

Accelerating ion/electron transport by engineering an indium-based heterostructure toward large and reversible lithium storage

Shuoyu Wang, Yuanxia Zhang, Ru-Ning Tian, Mengnuo Fu, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: The high activity of the In2O3/In2S3 heterostructure can be activated into homogeneous In2OxS3-x nanodots, stabilizing subsequent cycles. The In2O3/In2S3 shows a high capacity of 1140 mA h g(-1) at 0.1 A g(-1) after 290 cycles, and even at 1 A g(-1), it retains a reversible capacity of 900 mA h g(-1) after 600 cycles.

CHEMICAL COMMUNICATIONS (2023)

Article Chemistry, Physical

Atomically bonding Na anodes with metallized ceramic electrolytes by ultrasound welding for high-energy/power solid-state sodium metal batteries

Dongchen Li, Xinxin Wang, Qi Guo, Xiaole Yu, Shangxu Cen, Huirong Ma, Jingjing Chen, Dajian Wang, Zhiyong Mao, Chenlong Dong

Summary: Solid-state sodium metal batteries are highly attractive for large-scale energy storage due to their high safety, high energy density, and low cost. However, the practical application has been hindered by large interfacial resistance and sodium dendrite growth. In this study, a modified ultrasound welding technique was proposed to improve the interface between Na anodes and Au-metalized Na3Zr2Si2PO12 electrolytes. The results showed that the modified interface exhibited low interfacial resistance and strong dendrite inhibition ability, enabling stable cycling and high current density. Considering the importance of energy density, a full battery with a solid-state electrolyte and Na3V2(PO4)(3) cathode achieved high energy density and power density. The assembly of a pouch-type solid-state sodium metal full battery demonstrated the potential of this strategy to engineer low-resistance and highly stable interfaces for high-energy/density solid-state sodium metal batteries.

CARBON ENERGY (2023)

Article Materials Science, Multidisciplinary

Synthesis, microstructure and ionic conductivity of Li1+xAlxTi2-x(PO4)3-based composite ceramic electrolyte

Xiaole Yu, Shangxu Cen, Zhongrui Yu, Peng Yang, Huirong Ma, Jingjing Chen, Dajian Wang, Chenlong Dong, Zhiyong Mao

Summary: In this study, the stability and ionic conductivity of the NASICON-type Li1.3Al0.3Ti1.7(PO4)(3) electrolyte were enhanced, and the degradation of the electrolyte was slowed down by introducing LLZTO particles.

FUNCTIONAL MATERIALS LETTERS (2022)

No Data Available