Effects of post-production heat treatment on the mechanical and corrosion behaviour of CoCrMoW alloy manufactured through selective laser melting

Microstructural features of biomedical cobalt–chromium–molybdenum (CoCrMo) alloy from powder bed fusion to aging heat treatment

(2020) Haoqing Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructures and Mechanical Properties of Dental Co-Cr-Mo-W Alloys Fabricated by Selective Laser Melting at Different Subsequent Heat Treatment Temperatures

(2020) Wei Wei et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Accelerated γ-face-centered cubic to ε-hexagonal close packed massive transformation in a laser powder bed fusion additively manufactured Co-29Cr-5Mo alloy

(2020) Boateng Twum Donkor et al.   SCRIPTA MATERIALIA

Influence of microstructure on corrosion behavior of biomedical Co-Cr-Mo-W alloy fabricated by selective laser melting

(2020) Xin Dong et al.   CORROSION SCIENCE

Improving mechanical properties of selective laser melted Co29Cr9W3Cu alloy by eliminating mesh-like random high-angle grain boundary

(2020) Yanjin Lu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fatigue behavior of biomedical Co–Cr–Mo–W alloy fabricated by selective laser melting

(2020) Xin Dong et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of building direction on the mechanical anisotropy of biocompatible Co–Cr–Mo alloy manufactured by selective laser melting process

(2020) Kyu-Sik Kim et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Reduction in anisotropic response of corrosion properties of selective laser melted Co–Cr–Mo alloys by post-heat treatment

(2020) Yuka Kajima et al.   DENTAL MATERIALS

Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes

(2019) Decheng Kong et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Effect of heat treatment on the microstructure and fatigue strength of CoCrMo alloys fabricated by selective laser melting

(2019) Erina Seki et al.   MATERIALS LETTERS

Precipitates formation and evolution in a Co-based alloy produced by powder bed fusion

(2019) E. Santecchia et al.   JOURNAL OF ALLOYS AND COMPOUNDS

An assessment of biomedical CoCrMo alloy fabricated by direct metal laser sintering technique for implant applications

(2019) Daniel de Castro Girão et al.   Materials Science & Engineering C-Materials for Biological Applications

Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum

(2019) Swee Leong Sing et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting

(2018) Mingkang Zhang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

On productivity of laser additive manufacturing

(2018) Andrey V. Gusarov et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Morphology and properties of CoCrMo parts fabricated by selective laser melting

(2018) Changhui Song et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mechanical and phase transformation behaviour of biomedical Co-Cr-Mo alloy fabricated by direct metal laser sintering

(2018) M. Béreš et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A review of powder additive manufacturing processes for metallic biomaterials

(2018) W.S.W. Harun et al.   POWDER TECHNOLOGY

Additive manufacturing of metallic components – Process, structure and properties

(2018) T. DebRoy et al.   PROGRESS IN MATERIALS SCIENCE

Grain growth during selective laser melting of a Co–Cr–Mo alloy

(2017) Z. W. Chen et al.   JOURNAL OF MATERIALS SCIENCE

Advances in metals and alloys for joint replacement

(2017) Lenka Kunčická et al.   PROGRESS IN MATERIALS SCIENCE

Effects of thermal treatments on microstructure and mechanical properties of a Co–Cr–Mo–W biomedical alloy produced by laser sintering

(2016) P. Mengucci et al.   Journal of the Mechanical Behavior of Biomedical Materials

Changes in Microstructure of Biomedical Co-Cr-Mo Alloys during Aging at 973 to 1373 K

(2016) Kosuke Ueki et al.   MATERIALS TRANSACTIONS

Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting

(2015) B. Qian et al.   DENTAL MATERIALS

Metallic implant biomaterials

(2015) Qizhi Chen et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Role of strain-induced martensitic transformation on extrusion and intrusion formation during fatigue deformation of biomedical Co–Cr–Mo–N alloys

(2014) Takuya Mitsunobu et al.   ACTA MATERIALIA

In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting

(2014) Yolanda S. Hedberg et al.   DENTAL MATERIALS

Corrosion behaviour of CoCrMo alloys in 2 wt% sulphuric acid solution

(2014) Xiaoqing Zhang et al.   ELECTROCHIMICA ACTA

Collective behavior of strain-induced martensitic transformation (SIMT) in biomedical Co–Cr–Mo–N alloy polycrystal: An ex-situ electron backscattering diffraction study

(2014) Byoung-Soo Lee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy

(2013) Yuichiro Koizumi et al.   ACTA MATERIALIA

Corrosion behaviour assessment of cast and HIPed Stellite 6 alloy in a chloride-containing environment

(2013) F. Rosalbino et al.   ELECTROCHIMICA ACTA

Precipitates in Biomedical Co-Cr Alloys

(2013) Takayuki Narushima et al.   JOM

The influence of cooling conditions on grain size, secondary phase precipitates and mechanical properties of biomedical alloy specimens produced by investment casting

(2013) R. Kaiser et al.   Journal of the Mechanical Behavior of Biomedical Materials

Microstructures and mechanical properties of Co–29Cr–6Mo alloy fabricated by selective laser melting process for dental applications

(2013) Atsushi Takaichi et al.   Journal of the Mechanical Behavior of Biomedical Materials

Local strain evolution due to athermal γ→ε martensitic transformation in biomedical Co Cr Mo alloys

(2013) Kenta Yamanaka et al.   Journal of the Mechanical Behavior of Biomedical Materials

Precipitates in Biomedical Co-28Cr-6Mo-(0–0.41)C Alloys Heat-Treated at 1473 K to 1623 K (1200 °C to 1350 °C)

(2012) Shingo Mineta et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Effects of solution pH and Cl− on electrochemical behaviour of an Aermet100 ultra-high strength steel in acidic environments

(2011) Y.B. Hu et al.   CORROSION SCIENCE

Microstructural evolution during isothermal aging and strain-induced transformation followed by isothermal aging in Co-Cr-Mo-C alloy: A comparative study

(2010) H.R. Lashgari et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Evolution of cold-rolled microstructures of biomedical Co-Cr-Mo alloys with and without N doping

(2010) Manami Mori et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Influence of microstructure of HC CoCrMo biomedical alloys on the corrosion and wear behaviour in simulated body fluids

(2010) Leandre Casabán Julián et al.   TRIBOLOGY INTERNATIONAL

A low-temperature study to examine the role of ε-martensite during strain-induced transformations in metastable austenitic stainless steels

(2009) K. Datta et al.   ACTA MATERIALIA

Effect of thermal treatment and applied potential on the electrochemical behaviour of CoCrMo biomedical alloy

(2008) C. Valero Vidal et al.   ELECTROCHIMICA ACTA

Elastic strain evolution and ε-martensite formation in individual austenite grains during in situ loading of a metastable stainless steel

(2007) Peter Hedström et al.   MATERIALS LETTERS