Technical, economic and environmental analyses of combined heat and power (CHP) system with hybrid prime mover and optimization using genetic algorithm

Optimal design and sensitivity analysis of the stand-alone hybrid energy system with PV and biomass-CHP for remote villages

(2021) Ling Ji et al.   ENERGY

Power system planning based on CSP-CHP system to integrate variable renewable energy

(2021) Xin Li et al.   ENERGY

Thermodynamic performance analysis and multi-criteria optimization of a hybrid combined heat and power system coupled with geothermal energy

(2020) Yuzhu Chen et al.   ENERGY CONVERSION AND MANAGEMENT

Technical and economic analyses of a combined cooling, heating and power system based on a hybrid microturbine (solar-gas) for a residential building

(2020) Mahmood Chahartaghi et al.   ENERGY AND BUILDINGS

Technical and economic evaluations of combined cooling, heating and power (CCHP) system with gas engine in commercial cold storages

(2020) Majid Soltani et al.   ENERGY CONVERSION AND MANAGEMENT

Cleaner production of combined cooling, heating, power and water for isolated buildings with an innovative hybrid (solar, wind and LPG fuel) system

(2020) Sepehr Sanaye et al.   JOURNAL OF CLEANER PRODUCTION

Energy, environmental and economic evaluations of a CCHP system driven by Stirling engine with helium and hydrogen as working gases

(2019) Mahmood Chahartaghi et al.   ENERGY

Performance investigation of a combined heat and power system with internal and external combustion engines

(2019) Mohammad Sheykhi et al.   ENERGY CONVERSION AND MANAGEMENT

Thermodynamic and economic analyses of a hybrid waste-driven CHP–ORC plant with exhaust heat recovery

(2019) A. Arabkoohsar et al.   ENERGY CONVERSION AND MANAGEMENT

Gas turbine efficiency enhancement using absorption chiller. Case study for Tashkent CHP

(2019) Erkinjon Matjanov   ENERGY

Analysis of different arrangements of combined cooling, heating and power systems with internal combustion engine from energy, economic and environmental viewpoints

(2019) Mohammad Mahdi Balakheli et al.   ENERGY CONVERSION AND MANAGEMENT

Gasification process integration with existing combined heat and power plants for polygeneration of dimethyl ether or methanol: A detailed profitability analysis

(2018) Chaudhary Awais Salman et al.   APPLIED ENERGY

Techno-economic assessment of biogas-fed CHP hybrid systems in a real wastewater treatment plant

(2018) M. MosayebNezhad et al.   APPLIED THERMAL ENGINEERING

Performance analysis of a combined cooling, heating and power system with PEM fuel cell as a prime mover

(2018) Mahmood Chahartaghi et al.   APPLIED THERMAL ENGINEERING

Optimal design and operation of distributed low-carbon energy technologies in commercial buildings

(2018) Salvador Acha et al.   ENERGY

Energy, exergy, and economic evaluations of a CCHP system by using the internal combustion engines and gas turbine as prime movers

(2018) Mohammad Abbasi et al.   ENERGY CONVERSION AND MANAGEMENT

Thermal modeling of a trigeneration system based on beta-type Stirling engine for reductions of fuel consumption and pollutant emission

(2018) Mahmood Chahartaghi et al.   JOURNAL OF CLEANER PRODUCTION

Thermodynamic analysis of a gas turbine cycle equipped with a non-ideal adiabatic model for a double acting Stirling engine

(2017) Mahmood Korlu et al.   ENERGY CONVERSION AND MANAGEMENT

Optimisation of stand-alone hybrid CHP systems meeting electric and heating loads

(2017) Barun K. Das et al.   ENERGY CONVERSION AND MANAGEMENT

Micro-combined heat and power systems (micro-CHP) based on renewable energy sources

(2017) Simon Martinez et al.   ENERGY CONVERSION AND MANAGEMENT

Exergy-energy-environ evaluation of combined cooling heating and power system based on a double stage compression regenerative gas turbine in large scales

(2017) Masood Ebrahimi et al.   ENERGY CONVERSION AND MANAGEMENT

The environ-thermo-economical potentials of operating gas turbines in industry for combined cooling, heating, power and process (CCHPP)

(2017) Masood Ebrahimi   JOURNAL OF CLEANER PRODUCTION

Thermodynamic analysis of the part load performance for a small scale gas turbine jet engine by using exergy analysis method

(2016) Cem Tahsin Yucer   ENERGY

Optimal design and operation strategy for integrated evaluation of CCHP (combined cooling heating and power) system

(2016) Miao Li et al.   ENERGY

Applying relative equivalent uniform annual benefit for optimum selection of a gas engine combined cooling, heating and power system for residential buildings

(2016) Sepehr Sanaye et al.   ENERGY AND BUILDINGS

Applying Relative Net Present or Relative Net Future Worth Benefit and exergy efficiency for optimum selection of a natural gas engine based CCHP system for a hotel building

(2016) Sepehr Sanaye et al.   Journal of Natural Gas Science and Engineering

Modelling and optimization of CHP based district heating system with renewable energy production and energy storage

(2015) Haichao Wang et al.   APPLIED ENERGY

CO2 capture from syngas by an adsorption process at a biomass gasification CHP plant: Its comparison with amine-based CO2 capture

(2015) Gabriel David Oreggioni et al.   International Journal of Greenhouse Gas Control

Microturbogas cogeneration systems for distributed generation: Effects of ambient temperature on global performance and components’ behavior

(2014) F. Caresana et al.   APPLIED ENERGY

Simultaneous use of MRM (maximum rectangle method) and optimization methods in determining nominal capacity of gas engines in CCHP (combined cooling, heating and power) systems

(2014) Sepehr Sanaye et al.   ENERGY

Thermal–economic–environmental analysis and multi-objective optimization of an ice thermal energy storage system for gas turbine cycle inlet air cooling

(2014) Ali Shirazi et al.   ENERGY

Comparative economic analysis of gas turbine-based power generation and combined heat and power systems using biogas fuel

(2014) Jun Young Kang et al.   ENERGY

Comparison of different scenarios in optimal design of a CCHP plant

(2014) Sepehr Sanaye et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING

Model of a small steam engine for renewable domestic CHP (combined heat and power) system

(2013) G. Ferrara et al.   ENERGY

Sizing the prime mover of a residential micro-combined cooling heating and power (CCHP) system by multi-criteria sizing method for different climates

(2013) Masood Ebrahimi et al.   ENERGY

Optimal structural design of residential cogeneration systems in consideration of their operating restrictions

(2013) Tetsuya Wakui et al.   ENERGY

Application of hybrid micro-cogeneration system—Thermal and power energy solutions for Canadian residences

(2013) E. Entchev et al.   ENERGY AND BUILDINGS

Energy, environmental, and economic evaluation of a CCHP system for a data center based on operational data

(2013) Donghao Xu et al.   ENERGY AND BUILDINGS

Integrated assessment of combined cooling heating and power systems under different design and management options for residential buildings in Shanghai

(2012) Qunyin Gu et al.   ENERGY AND BUILDINGS

Climate impact on the prime mover size and design of a CCHP system for the residential building

(2012) Masood Ebrahimi et al.   ENERGY AND BUILDINGS

The role of cogeneration systems in sustainability of energy

(2012) Uğur Çakir et al.   ENERGY CONVERSION AND MANAGEMENT

Theoretical analysis of a transcritical power cycle for power generation from waste energy at low temperature heat source

(2012) Fredy Vélez et al.   ENERGY CONVERSION AND MANAGEMENT

Exergoenvironmental analysis and optimization of a cogeneration plant system using Multimodal Genetic Algorithm (MGA)

(2010) Pouria Ahmadi et al.   ENERGY

Estimating the power and number of microturbines in small-scale combined heat and power systems

(2009) Sepehr Sanaye et al.   APPLIED ENERGY

Selecting the prime movers and nominal powers in combined heat and power systems

(2007) Sepehr Sanaye et al.   APPLIED THERMAL ENGINEERING