Severe plastic deformation (SPD) of biodegradable magnesium alloys and composites: A review of developments and prospects

Effect of Indium on the Negative Difference Effect for Magnesium Alloy

(2021) Tongyao Bao et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Formulation of corrosion rate of magnesium alloys using microstructural parameters

(2020) Ahmad Bahmani et al.   Journal of Magnesium and Alloys

Processing characterization of binary Mg-Zn alloys fabricated by a new powder consolidation combined severe plastic deformation method

(2020) H. Torabi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of microstructure on the torsional properties of biodegradable WE43 Mg alloy

(2020) Yi Zhang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Influence of Ball Burnishing Process on Equal Channel Angular Pressed Mg-Zn-Si Alloy on the Evolution of Microstructure and Corrosion Properties

(2020) S. Ramesh et al.   Silicon

Achieving a high corrosion resistant and high strength magnesium alloy using multi directional forging

(2020) Ahmad Bahmani et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The Effect of High-Pressure Torsion on Microstructure, Hardness and Corrosion Behavior for Pure Magnesium and Different Magnesium Alloys

(2019) Claudio L. P. Silva et al.   ADVANCED ENGINEERING MATERIALS

Ultra-fine grained Mg-Zn-Ca-Mn alloy with simultaneously improved strength and ductility processed by equal channel angular pressing

(2019) L.B. Tong et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Simultaneously improving corrosion resistance and mechanical properties of a magnesium alloy via equal-channel angular pressing and post water annealing

(2019) Dan Song et al.   MATERIALS & DESIGN

High Performance Fine-Grained Biodegradable Mg-Zn-Ca Alloys Processed by Severe Plastic Deformation

(2019) Alexei Vinogradov et al.   Metals

Enrichment efficiency of noble alloying elements on magnesium and effect on hydrogen evolution

(2019) P. Gore et al.   CORROSION SCIENCE

Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn Alloy

(2019) S. Ramesh et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Cytotoxicity and Corrosion Behavior of Magnesium and Magnesium Alloys in Hank's Solution after Processing by High‐Pressure Torsion

(2019) Debora R. Lopes et al.   ADVANCED ENGINEERING MATERIALS

Electrochemical behavior of a magnesium ZK60 alloy processed by high-pressure torsion

(2019) Hamidreza Torbati-Sarraf et al.   CORROSION SCIENCE

Magnesium-based composites and alloys for medical applications: A review of mechanical and corrosion properties

(2019) Murad Ali et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Preparation of a single-phase Mg–6Zn alloy via ECAP-stimulated solution treatment

(2019) Kai Yan et al.   Journal of Magnesium and Alloys

Effect of Rotary Swaging on Microstructure and Mechanical Properties of an AZ31 Magnesium Alloy

(2019) Zuzanka Trojanová et al.   ADVANCED ENGINEERING MATERIALS

Improved corrosion resistant and strength of a magnesium alloy using multi-directional forging (MDF)

(2019) Ahmad Bahmani et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

Optimising the torsional properties and corrosion resistance of biodegradable WE43 Mg alloy by ECAP and subsequent ageing

(2019) Yi Zhang et al.   MATERIALS TECHNOLOGY

Prospects and strategies for magnesium alloys as biodegradable implants from crystalline to bulk metallic glasses and composites—A review

(2019) Faisal Kiani et al.   Acta Biomaterialia

Corrosion of Mg alloys EV31A, WE43B, and ZE41A in chloride‐ and sulfate‐containing solutions saturated with magnesium hydroxide

(2019) Akif Soltan et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Enhancement of resistance to galvanic corrosion of ZE41 Mg alloy by equal channel angular pressing

(2019) Prithivirajan Sekar et al.   MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Microstructure, mechanical properties, and degradation of Mg-Ag alloy after equal-channel angular pressing

(2019) Krzysztof Bryła et al.   Materials Science & Engineering C-Materials for Biological Applications

Effects of nanofeatures induced by severe shot peening (SSP) on mechanical, corrosion and cytocompatibility properties of magnesium alloy AZ31

(2018) Sara Bagherifard et al.   Acta Biomaterialia

Effect of ECAP Processing on Corrosion Behavior and Mechanical Properties of the ZFW MP Magnesium Alloy as a Biodegradable Implant Material

(2018) Mozhgan Gholami-Kermanshahi et al.   ADVANCED ENGINEERING MATERIALS

Large reduction die-less mandrel drawing of magnesium alloy micro-tubes

(2018) Tsuyoshi Furushima et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Simultaneously improving the corrosion resistance and strength of magnesium via low levels of Zn and Ge additions

(2018) R.L. Liu et al.   CORROSION SCIENCE

Enhanced corrosion resistance of AZ91 magnesium alloy through refinement and homogenization of surface microstructure by friction stir processing

(2018) Qu Liu et al.   CORROSION SCIENCE

Recrystallization and mechanical properties of WE43 magnesium alloy processed via cyclic expansion extrusion

(2018) Soheil Amani et al.   International Journal of Minerals Metallurgy and Materials

Mechanical properties and characterization of zirconium oxide (ZrO 2 ) and coconut shell ash(CSA) reinforced aluminium (Al 6082) matrix hybrid composite

(2018) K. Ravi Kumar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Increasing strength and ductility of magnesium alloy WE43 by equal-channel angular pressing

(2018) N.S. Martynenko et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Mg–3Zn–0.5Zr/HA nanocomposites fabricated by high shear solidification and equal channel angular extrusion

(2018) Yan Huang et al.   MATERIALS SCIENCE AND TECHNOLOGY

Stress corrosion cracking behaviors of RE-containing ME21 magnesium alloy processed by equal-channel angular pressing

(2018) Jinghua Jiang et al.   JOURNAL OF RARE EARTHS

A Study of the Structure, Mechanical Properties and Corrosion Resistance of Magnesium Alloy WE43 After Rotary Swaging

(2018) N. S. Martynenko et al.   METAL SCIENCE AND HEAT TREATMENT

Processing Magnesium and Its Alloys by High-Pressure Torsion: An Overview

(2018) Roberto B. Figueiredo et al.   ADVANCED ENGINEERING MATERIALS

Microstructure and corrosion properties of Mg-4Zn-2Gd-0.5Ca alloy influenced by multidirectional forging

(2018) Fang-fang Cao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of equal channel angular pressing on structure, texture, mechanical and in-service properties of a biodegradable magnesium alloy

(2018) N. Martynenko et al.   MATERIALS LETTERS

Orientation imaging microscopy and microhardness in a ZK60 magnesium alloy processed by high-pressure torsion

(2017) Seyed Alireza Torbati-Sarraf et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of severe plastic deformation on the biocompatibility and corrosion rate of pure magnesium

(2017) Cláudio L. P. Silva et al.   JOURNAL OF MATERIALS SCIENCE

Processing and mechanical characteristics of magnesium-hydroxyapatite metal matrix biocomposites

(2017) R. del Campo et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effect of equal channel angular pressing on in vitro degradation of LAE442 magnesium alloy

(2017) Peter Minárik et al.   Materials Science & Engineering C-Materials for Biological Applications

Fundamentals and advances in magnesium alloy corrosion

(2017) M. Esmaily et al.   PROGRESS IN MATERIALS SCIENCE

Simultaneously enhanced strength and ductility of Mg-Zn-Zr-Ca alloy with fully recrystallized ultrafine grained structures

(2017) Ruixiao Zheng et al.   SCRIPTA MATERIALIA

Corrosion behavior of severely plastic deformed magnesium based alloys: A review

(2017) D. Ahmadkhaniha et al.   Surface Engineering and Applied Electrochemistry

Effect of different c / a ratio on the microstructure and mechanical properties in magnesium alloys processed by ECAP

(2016) Peter Minárik et al.   ACTA MATERIALIA

Vascularized bone grafting fixed by biodegradable magnesium screw for treating osteonecrosis of the femoral head

(2016) Dewei Zhao et al.   BIOMATERIALS

Mechanical properties and biocorrosion behaviour of deformed Mg–Gd–Nd–Zn–Zr alloy by equal channel angular pressing

(2016) Y. Liu et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Zirconia in biomedical applications

(2016) Yen-Wei Chen et al.   Expert Review of Medical Devices

Analysis of Microstructure and Damage Evolution in Ultra-Thin Wires of the Magnesium Alloy MgCa0.8 at Multipass Drawing

(2016) Andrij Milenin et al.   JOM

Enhanced Strength and Ductility Due to Microstructure Refinement and Texture Weakening of the GW102K Alloy by Cyclic Extrusion Compression

(2016) Jinbao Lin et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Strengthening of Mg based alloy through grain refinement for orthopaedic application

(2016) Soumyaranjan Nayak et al.   Journal of the Mechanical Behavior of Biomedical Materials

Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)

(2016) X.G. Qiao et al.   MATERIALS CHARACTERIZATION

Microstructure characterization of LAE442 magnesium alloy processed by extrusion and ECAP

(2016) Peter Minárik et al.   MATERIALS CHARACTERIZATION

Strengthening of age-hardenable WE43 magnesium alloy processed by high pressure torsion

(2016) E.A. Lukyanova et al.   MATERIALS LETTERS

In vitro and in vivo studies of biodegradable fine grained AZ31 magnesium alloy produced by equal channel angular pressing

(2016) B. Ratna Sunil et al.   Materials Science & Engineering C-Materials for Biological Applications

Mechanical properties and biocorrosion resistance of the Mg-Gd-Nd-Zn-Zr alloy processed by equal channel angular pressing

(2016) Junyi Zhang et al.   Materials Science & Engineering C-Materials for Biological Applications

Structure and mechanical properties of the Mg-Y-Gd-Zr alloy after high pressure torsion

(2016) S.V. Dobatkin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Corrosion of Ultrafine Grained Materials by Severe Plastic Deformation, an Overview

(2016) Hiroyuki Miyamoto   MATERIALS TRANSACTIONS

Long-term clinical study and multiscale analysis of in vivo biodegradation mechanism of Mg alloy

(2016) Jee-Wook Lee et al.   PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA

Microstructures and degradation mechanism in simulated body fluid of biomedical Mg–Zn–Ca alloy processed by high pressure torsion

(2016) C.Z. Zhang et al.   MATERIALS & DESIGN

Development of biodegradable Mg–Ca alloy sheets with enhanced strength and corrosion properties through the refinement and uniform dispersion of the Mg2Ca phase by high-ratio differential speed rolling

(2015) J.W. Seong et al.   Acta Biomaterialia

Reprint of: The history of biodegradable magnesium implants: A review

(2015) Frank Witte   Acta Biomaterialia

Enhancement of the Mechanical Properties of an Mg-Zn-Ca Alloy Using High-Pressure Torsion

(2015) Olga B. Kulyasova et al.   ADVANCED ENGINEERING MATERIALS

Mg Dissolution in Phosphate and Chloride Electrolytes: Insight into the Mechanism of the Negative Difference Effect

(2015) S. Lebouil et al.   CORROSION

Corrosion mechanism and hydrogen evolution on Mg

(2015) S. Thomas et al.   CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE

Visco-plastic modeling of mechanical responses and texture evolution in extruded AZ31 magnesium alloy for various loading conditions

(2015) Farhoud Kabirian et al.   INTERNATIONAL JOURNAL OF PLASTICITY

Microstructure evolution and mechanical properties of quasicrystal-reinforced Mg–Zn–Gd alloy processed by cyclic extrusion and compression

(2015) Yuan Tian et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The pH Dependence of Magnesium Dissolution and Hydrogen Evolution during Anodic Polarization

(2015) L. Rossrucker et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Evolution in hardness and texture of a ZK60A magnesium alloy processed by high-pressure torsion

(2015) Han-Joo Lee et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion

(2015) In-Chul Choi et al.   SCRIPTA MATERIALIA

Effect of equal-channel angular pressing and aging on corrosion behavior of ZK60 Mg alloy

(2015) Xin LI et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Mg Dissolution in Phosphate and Chloride Electrolytes: Insight into the Mechanism of the Negative Difference Effect

(2015) S. Lebouil et al.   CORROSION

Recent advances on the development of magnesium alloys for biodegradable implants

(2014) Yongjun Chen et al.   Acta Biomaterialia

Microstructure, texture evolution, mechanical properties and corrosion behavior of ECAP processed ZK60 magnesium alloy for biodegradable applications

(2014) Ehsan Mostaed et al.   Journal of the Mechanical Behavior of Biomedical Materials

Microstructures and mechanical properties of pure Mg processed by rotary swaging

(2014) W.M. Gan et al.   MATERIALS & DESIGN

Microstructure stability of ultra-fine grained magnesium alloy AZ31 processed by extrusion and equal-channel angular pressing (EX–ECAP)

(2014) Jitka Stráská et al.   MATERIALS CHARACTERIZATION

Biodegradable metals

(2014) Y.F. Zheng et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

Hardening mechanism of commercially pure Mg processed by high pressure torsion at room temperature

(2014) Xiao Guang Qiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Ultrafine grain formation in Mg–Zn alloy by in situ precipitation during high-pressure torsion

(2014) Fanqiang Meng et al.   SCRIPTA MATERIALIA

Effects of alloying elements on the corrosion behavior and biocompatibility of biodegradable magnesium alloys: a review

(2014) Yunfei Ding et al.   Journal of Materials Chemistry B

Effect of different processings on mechanical property and corrosion behavior in simulated body fluid of Mg-Zn-Y-Nd alloy for cardiovascular stent application

(2014) Shi-Jie Zhu et al.   Frontiers of Materials Science

Biodegradable magnesium-based screw clinically equivalent to titanium screw in hallux valgus surgery: short term results of the first prospective, randomized, controlled clinical pilot study

(2013) Henning Windhagen et al.   Biomedical Engineering Online

Enhanced corrosion resistance of high strength Mg–3Al–1Zn alloy sheets with ultrafine grains in a phosphate-buffered saline solution

(2013) H.S. Kim et al.   CORROSION SCIENCE

Room temperature corrosion properties of AZ31 magnesium alloy processed by extrusion and equal channel angular pressing

(2013) J. Vrátná et al.   JOURNAL OF MATERIALS SCIENCE

Microstructures and tensile properties of Mg–Gd–Y–Zr alloy during multidirectional forging at 773K

(2013) Liechong Tang et al.   MATERIALS & DESIGN

Structural and mechanical characteristics of Mg–4Zn and Mg–4Zn–0.4Ca alloys after different thermal and mechanical processing routes

(2013) Monika Hradilová et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

ECAP effect on the micro-structure and mechanical properties of AM30 magnesium alloy

(2013) Ramin Jahadi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Recent progress in biomedical applications of titanium dioxide

(2013) Zi Fei Yin et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Enhanced biodegradation behavior of ultrafine-grained ZE41A magnesium alloy in Hank's solution

(2013) Fan Zhang et al.   Progress in Natural Science-Materials International

The Use of Carbon Nanotubes to Reinforce 45S5 Bioglass-Based Scaffolds for Tissue Engineering Applications

(2013) R. Touri et al.   Biomed Research International

Biomedical coatings on magnesium alloys – A review

(2012) H. Hornberger et al.   Acta Biomaterialia

Effect of ECAP processing on corrosion resistance of AE21 and AE42 magnesium alloys

(2012) P. Minárik et al.   APPLIED SURFACE SCIENCE

The microstructure and properties of cyclic extrusion compression treated Mg–Zn–Y–Nd alloy for vascular stent application

(2012) Qiong Wu et al.   Journal of the Mechanical Behavior of Biomedical Materials

Mechanical properties and biocorrosion resistance of Mg-Nd-Zn-Zr alloy improved by cyclic extrusion and compression

(2012) Xiaobo Zhang et al.   MATERIALS LETTERS

Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes

(2012) Ghader Faraji et al.   MATERIALS LETTERS

Fabrication of biodegradable nano-sized β-TCP/Mg composite by a novel melt shearing technology

(2012) Debao Liu et al.   Materials Science & Engineering C-Materials for Biological Applications

Enhanced superplasticity and diffusional creep in ultrafine-grained Mg–6Al–1Zn alloy with high thermal stability

(2012) W.J. Kim et al.   SCRIPTA MATERIALIA

Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy

(2011) Z. Pu et al.   CORROSION SCIENCE

Microstructure and characteristics of the metal-ceramic composite (MgCa-HA/TCP) fabricated by liquid metal infiltration

(2011) X. N. Gu et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS

Effects of extrusion and heat treatment on the mechanical properties and biocorrosion behaviors of a Mg–Nd–Zn–Zr alloy

(2011) Xiaobo Zhang et al.   Journal of the Mechanical Behavior of Biomedical Materials

Effect of forging process on microstructure, mechanical and corrosion properties of biodegradable Mg–1Ca alloy

(2011) Shervin Eslami Harandi et al.   MATERIALS & DESIGN

Influence of extrusion temperature and process parameter on microstructures and tensile properties of a particulate reinforced magnesium matrix nanocomposite

(2011) K.B. Nie et al.   MATERIALS & DESIGN

In vitro study on equal channel angular pressing AZ31 magnesium alloy with and without back pressure

(2011) X.N. Gu et al.   Materials Science and Engineering B-Advanced Functional Solid-State Materials

High-pressure torsion of pure magnesium: Evolution of mechanical properties, microstructures and hydrogen storage capacity with equivalent strain

(2011) Kaveh Edalati et al.   SCRIPTA MATERIALIA

In vitro studies of biomedical magnesium alloys in a simulated physiological environment: A review

(2010) Y. Xin et al.   Acta Biomaterialia

Grain character influences on corrosion of ECAPed pure magnesium

(2010) N. Birbilis et al.   CORROSION ENGINEERING SCIENCE AND TECHNOLOGY

Homogeneous corrosion of high pressure torsion treated Mg–Zn–Ca alloy in simulated body fluid

(2010) J.H. Gao et al.   MATERIALS LETTERS

Microstructure, mechanical properties and bio-corrosion evaluation of biodegradable AZ91-FA nanocomposites for biomedical applications

(2010) M. Razavi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A numerical model of severe shot peening (SSP) to predict the generation of a nanostructured surface layer of material

(2010) S. Bagherifard et al.   SURFACE & COATINGS TECHNOLOGY

Microstructure and texture characteristics of ZK60 Mg alloy processed by cyclic extrusion and compression

(2010) Jin-bao LIN et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation

(2009) Zhiming Shi et al.   CORROSION SCIENCE

Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution

(2009) Dan Song et al.   CORROSION SCIENCE

The grain size dependence of flow stress in an ECAPed AZ31 Mg alloy with a constant texture

(2009) Ho-Kyung Kim   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of rare-earth elements and Ca additions on the microstructure and mechanical properties of AZ31 magnesium alloy processed by ECAP

(2009) S.M. Masoudpanah et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Improving both strength and ductility of a Mg alloy through a large number of ECAP passes

(2009) Aibin Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Corrosion of Pure Mg as a Function of Grain Size and Processing Route

(2008) C. op't Hoog et al.   ADVANCED ENGINEERING MATERIALS

Relation between corrosion behavior and microstructure of Mg–Zn–Y alloys prepared by rapid solidification at various cooling rates

(2008) Shogo Izumi et al.   CORROSION SCIENCE

Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression

(2008) Jinbao Lin et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Using high-pressure torsion for metal processing: Fundamentals and applications

(2008) A ZHILYAEV et al.   PROGRESS IN MATERIALS SCIENCE

Microstructure evolution in magnesium alloy AZ31 during cyclic extrusion compression

(2007) Y.J. Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Evaluation of the skin sensitizing potential of biodegradable magnesium alloys

(2007) Frank Witte et al.   JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A

Network-shaped fine-grained microstructure and high ductility of magnesium alloy fabricated by cyclic extrusion compression

(2007) Y.J. Chen et al.   SCRIPTA MATERIALIA